Skip to main content
NEEWER Extendable Camera Desk Mount with Ball Head, 17"-40" Adjustable Table Light Stand with 1/4" Screw & C Clamp for DSLR Camera, Ring Light, Live Stream, Vlog, Max Load: 6.6lb/3kg, TL283 (RED)
NEEWER

NEEWER Extendable Camera Desk Mount with Ball Head

Bottom line: The NEEWER Extendable Camera Desk Mount with Ball Head ($22.94 on Amazon as of 2026-10-06): Extends from 17 in to 40 in across 3 twist-lock aluminum sections; main trade-off: C clamp won't fit desks or tables thicker than 2 in (5 cm).

$22.94

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $22.94 Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Extends from 17 in to 40 in across 3 twist-lock aluminum sections
  • ✓ Rated for 6.6 lb (3 kg), enough for many DSLR and mirrorless setups
  • ✓ C clamp fits desks up to 2 in thick; rubber pads protect wood surfaces
  • ✓ Ball head swivels 360 degrees and tilts -45 to +90 for portrait framing
  • ✓ Included 1/4 in male-to-female adapter mounts ring lights and LED panels

Cons

  • ✗ C clamp won't fit desks or tables thicker than 2 in (5 cm)
  • ✗ 6.6 lb cap rules out heavy cinema rigs and large telephoto lenses
  • ✗ Phone holder not included; phones need a separate 1/4 in clip
  • ✗ Three twist locks to reset each time you change height

Manufacturer description

The NEEWER TL283 Camera Desk Mount puts your camera, webcam or ring light where you want it without taking up desk space. The telescopic aluminum alloy stand extends from 17 in (43 cm) to 40 in (102 cm) across three sections with 22, 25 and 28 mm tube diameters. A twist lock holds each section in place, and the stand supports up to 6.6 lb (3 kg). The C clamp fits desks and tables up to 2 in (5 cm) thick. Its rubber pads keep it from scratching wooden surfaces, so the stand bolts to the edge of your workspace instead of sitting on it. At the top, the ball head swivels 360 degrees. A U-shaped…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored NEEWER Extendable Camera Desk Mount with Ball Head using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. NEEWER's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How tall does the NEEWER TL283 desk mount extend?

It extends from 17 in (43 cm) to 40 in (102 cm) using three telescopic aluminum sections with 22, 25 and 28 mm tube diameters, each held by a twist lock.

How much weight can the NEEWER TL283 hold?

The maximum load is 6.6 lb (3 kg). Add up your camera body, lens and any accessories and make sure the total stays under that limit.

Will the C clamp fit my desk?

The C clamp fits desks and tables up to 2 in (5 cm) thick. Rubber pads on the clamp help prevent scratches on wooden surfaces.

Can I mount a ring light or phone instead of a camera?

Yes. Along with the 1/4 in threaded ball head, it includes a 1/4 in male-to-female screw adapter for mounting a ring light, LED panel or phone holder in a fixed vertical position. A phone holder is not included.

Can I shoot in portrait orientation with this stand?

Yes. The ball head swivels 360 degrees, and its U-shaped notch lets it tilt from -45 to +90 degrees, so you can switch between landscape and portrait framing.

Key Features

  • 【Telescopic Metal Stand】 Extendable from 17”/43cm to 40”/102cm, this 3 sections (22/25/28mm tube diameter) telescopic stand offers a wide height range for flexible gear positioning. Built with robust aluminum alloy, it is durable with a maximum load capacity of 6.6lb (3kg). The twist lock to connect each section tube firmly holds them in place
  • 【Adjustable Desk C Clamp】 Suitable for desks up to 2"(5cm) in thickness, the desk mounted C clamp is a space saving tool to support the stand while keeping your desk/table clean and tidy. The rubber pads also prevent scratches on wooden surfaces
  • 【Multi Angle Ball Head】 With a 360° swivel movement, the ball head enables you to set up your camera in any direction, and the U shaped notch allows -45°to +90° vertical tilt for portrait or landscape camera orientations
  • 【Dual Mounting Options】 Besides the 1/4" threaded ball head, you can also use the provided 1/4" male to 1/4" female screw adapter to mount your device in a fixed vertical position, including ring light, phone (phone holder not included), LED light panel, etc
  • 【Extensive Application】 Mount your DSLR camera, mirrorless camera, webcam, ring light, and LED video light for product photography, macro photography, overhead photography, video conferencing, live streaming, online teaching, and vlogging. The 24.3oz/680g net weight makes it easy to carry around

Full Specifications

BrandNEEWER
ColorBlack
Weight6.6lb
Model NameTL283
Style NameTL283/Red
Unit Count1 Count
Form FactorDesk Stand
Model Number10101296
Mounting TypeTabletop
Item Dimensions1.77 x 1.77 x 40.16 inches
Mfr Part Number10101296
Number of Items1
Antenna LocationDesk
Compatible DevicesCamera
Enclosure MaterialAluminum
Included Components1 x Desk Mount Stand with C Clamp & Ball Head 1 x 1/4” Male to 1/4” Female screw Adapter
Warranty Description1 Year Manufacturer
Full listing titleNEEWER Extendable Camera Desk Mount with Ball Head, 17"-40" Adjustable Table Light Stand with 1/4" Screw & C Clamp for DSLR Camera, Ring Light, Live Stream, Vlog, Max Load: 6.6lb/3kg, TL283 (RED)

Ready to buy?

NEEWER Extendable Camera Desk Mount with Ball Head, 17"-40" Adjustable Table Light Stand with 1/4" Screw & C Clamp for DSLR Camera, Ring Light, Live Stream, Vlog, Max Load: 6.6lb/3kg, TL283 (RED) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $22.94

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
NEEWER Extendable Camera Desk Mount with Ball Head, 17"-40" Adjustable Table Light Stand with 1/4" Screw & C Clamp for DSLR Camera, Ring Light, Live Stream, Vlog, Max Load: 6.6lb/3kg, TL283 (RED)
$22.94
View on Amazon →