Antrader 6 Pcs Flat Ribbon Cable with Black 2.54mm FC
Bottom line: The Antrader 6 Pcs Flat Ribbon Cable with Black 2.54mm FC ($8.79 on Amazon as of 2026-10-21 16:24 UTC): Six 30cm (11.81 in) cables per pack for multiple rigs or spares; main trade-off: 16-pin only; 6-pin and 10-pin AVR ISP headers need a different cable.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Six 30cm (11.81 in) cables per pack for multiple rigs or spares
- ✓ 2x8 female ends mate with standard 2.54mm dual-row pin headers
- ✓ 28 AWG 7x36 stranded wire flexes better than solid-core ribbon
- ✓ Listed at 300V rating with 1.27mm center-to-center conductor spacing
- ✓ Conductors peel apart cleanly for custom split terminations
Cons
- ✗ 16-pin only; 6-pin and 10-pin AVR ISP headers need a different cable
- ✗ Fixed 30cm length may be too long for tight board-to-board links
- ✗ Female-to-female only; no male-ended variant included in the pack
- ✗ Listing does not state connector keying or polarization details
Manufacturer description
The Antrader Flat Ribbon Cable 6-pack contains six 30cm (11.81 in) IDC jumpers. Each one ends in black 2.54mm-pitch female connectors set in 2 rows of 8 pins. Both ends are female, so every cable plugs straight onto standard 0.1-inch dual-row pin headers on dev boards, programmers and breakout PCBs. Each cable uses 28 AWG (7x36) stranded wire rated for 300V, with conductors spaced 1.27mm (0.05 in) center to center. Stranded wire bends more easily than solid core when you route a cable through a case or around a stack of boards. The flat ribbon also keeps 16 signals together in one run…
SpecPicks Verdict
SpecPicks scored Antrader 6 Pcs Flat Ribbon Cable with Black 2.54mm FC using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Antrader's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cable fit a 10-pin or 6-pin AVR ISP header?
No. Each connector is 2 rows of 8 pins (16 positions) on 2.54mm pitch. Standard 6-pin and 10-pin AVR ISP headers need a cable with a matching 2x3 or 2x5 connector.
How long is each ribbon cable?
Each cable is 30cm (11.81 inches) long, and the pack has six identical cables.
What wire gauge and voltage rating does the cable use?
The listing specifies 28 AWG (7x36) stranded wire rated for 300V, with 1.27mm (0.05 in) center-to-center conductor spacing.
Are both ends female connectors?
Yes. Both ends are black 2.54mm-pitch 2x8 female IDC connectors, built to plug onto male pin headers on boards and programmers.
Can I split the ribbon to wire individual signals?
Yes. Per the listing, the conductors separate easily for clean individual terminations, so you can peel off single wires or groups for a custom pinout.
Key Features
- 【PRODUCT NAME】: Flat Ribbon Cable; Type: 2 rows of 8 pins, compatible with 2.54mm pitch pin headers
- 【SIZE】Cable Length: 30cm/11.81 inches. Cable width: 10.16mm/0.4in
- 【FEATURES】Wire: 28 AWG (7x36) Stranded 300V; Wire Spacing: 0.05" (1.27 mm) center to center
- 【SPACE SAVING】Ribbon cables save space and time for circuit interconnect components. Using standard wire connectors, jacks and pins, conductor ribbon cables are easily separated for clean terminations
- 【WIDE APPLICATION】6pcs IDC connector flat ribbon cable suitable for most Atmel AVR jtag debuggers, in-system programmers, isp downloads, etc
Full Specifications
| Brand | Antrader |
|---|---|
| Color | Grey |
| Gauge | 28.0 |
| Model | 8P-30CM |
| Cable Type | Flat Ribbon |
| Item Shape | Flat |
| Unit Count | 6.0 Count |
| Part Number | WQ22248 |
| Connector Type | Female to Female |
| Number of Pins | 16 |
| Maximum Voltage | 300 Volts |
| Number of Items | 6 |
| Special Feature | High Speed |
| Connector Gender | Female-to-Female |
| Compatible Devices | Atmel AVR jtag debuggers, in-system programmers, isp downloads, etc |
| 【FEATURES】Wire | 28 AWG (7x36) Stranded 300V; Wire Spacing: 0.05" (1.27 mm) center to center |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | Standard Packaging |
| 【SIZE】Cable Length | 30cm/11.81 inches. Cable width: 10.16mm/0.4in |
| Recommended Uses For Product | Development and prototyping with AVR devices, interfacing with digital cameras, digital video cameras, notebook computers, LCD TVs, and LCD monitors |
| Full listing title | Antrader 6 Pcs Flat Ribbon Cable with Black 2.54mm FC, 2 Row 8 Pin Female to Female Wires IDC Ribbon Connector (30cm Length) |
Ready to buy?
Antrader 6 Pcs Flat Ribbon Cable with Black 2.54mm FC, 2 Row 8 Pin Female to Female Wires IDC Ribbon Connector (30cm Length) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget 4K Gaming Monitor 2026: SANSUI 27" vs KOORUI QD-Mini LED vs ASUS TUF
- Best Cooling Solutions for Modern Gaming PCs (2026)
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- Anthropic Raises $65B Series H Near a Trillion-Dollar Valuation: What It Means for Local-AI Builders
- Qwen3.6-27B at 80 TPS on RTX 5090: Is the Claim Real?
- RX 9060 XT vs RX 9070 XT: OLED 1440p or 4K IPS?
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
- Intel Arc Stable Diffusion Benchmark: A770, B580 & B60 (2025)
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Raspberry Pi 5 IOMMU Driver Lands for the Mainline Linux Kernel
- Best GPU for 1440p Esports in 2026: RTX 3060 12GB Tested
- Sound Blaster in 2026: Using the Creative Sound BlasterX G6 on a Retro and Modern PC
- Best PC Game Controller for Every Genre in 2026
- Google's 'Frozen v2' Chip Bakes Gemini Into Silicon: What It Means for Local Rigs
- Claude Code Ran Hidden Repo Malware Unverified — Why Local AI Sandboxing Matters
- Retro PC storage in 2026: CompactFlash-to-IDE vs a SATA SSD for Win98/XP
- Voodoo 3 3500 TV vs GeForce 256 DDR: The Last Great 1999 Gaming GPU Showdown
- Claude Code Telemetry Flap: Why a Local RTX 3060 Rig Is the Privacy Play
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Best GPU for the Ryzen 7 5800X3D in 2026: No-Bottleneck Picks
- Best Logitech Gaming Gear in 2026: Mice, Keyboards, and Wheels
- Best Mechanical Keyboard for Office and Gaming Crossover (2026)
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090