Antrader 2 Pieces 2.54mm Pitch 50 Pin 50 Way F/F Connector IDC Flat Rainbow Ribbon Cable 1ft 30cm
Bottom line: The Antrader 2 Pieces 2.54mm Pitch 50 Pin 50 Way F/F Connector IDC Flat ($8.29 on Amazon as of 2026-10-21 16:20 UTC, orderable but not in stock): Two cables per pack, so you get a spare for a second build; main trade-off: fixed 12in (30cm) length may not reach widely spaced headers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Two cables per pack, so you get a spare for a second build
- ✓ Female 2x25 sockets fit standard 2.54mm 50-pin headers
- ✓ 28 AWG 7x36 stranded wire rated at 300V
- ✓ Rainbow color coding makes tracing individual signals easier
- ✓ Conductors separate cleanly for custom terminations
Cons
- ✗ Fixed 12in (30cm) length may not reach widely spaced headers
- ✗ Female-to-female only; no male or edge-card connector option
- ✗ Listing does not say whether the connectors are keyed
- ✗ Thin 28 AWG conductors are meant for signals, not heavy current
Manufacturer description
The Antrader 50 Pin IDC Flat Rainbow Ribbon Cable comes as two ready-made female-to-female jumpers for connecting 2.54mm (0.1") pin headers. Each cable is 12 inches (30cm) long with a 2 x 25 socket at both ends, so you can join two 50-pin headers without crimping your own connectors. The ribbon uses 28 AWG (7x36) stranded wire rated at 300V, with conductors spaced 0.05" (1.27mm) apart. The color-coded rainbow conductors help you keep track of pin orientation and follow individual signals while you debug a board. If you only need a few lines, the conductors peel apart cleanly so you can…
SpecPicks Verdict
SpecPicks scored Antrader 2 Pieces 2.54mm Pitch 50 Pin 50 Way F/F Connector IDC Flat… using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Antrader's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What kind of header does this ribbon cable plug into?
Both ends have female 50-pin sockets laid out as 2 rows of 25, sized for male pin headers with 2.54mm (0.1") spacing.
How long is each cable?
Each cable is 12 inches (30cm) long from end to end. You get two identical cables in the pack.
What wire gauge and voltage rating does it use?
The ribbon uses 28 AWG stranded wire (7 strands of 36 AWG) rated at 300V, with a 0.05" (1.27mm) center spacing between conductors.
Can I use it with an AVR JTAG debugger or ISP programmer?
Antrader says it suits most Atmel AVR JTAG debuggers, in-system programmers and ISP download setups that use a 50-pin, 2.54mm dual-row header. Check your programmer's header pin count before you buy.
Can I split off individual wires from the ribbon?
Yes. The conductors separate easily, so you can peel off individual lines and terminate them with standard wire connectors, jacks or pins.
Key Features
- 50Pin 50Way/ Female to Female, compatible with 2.54mm spacing pin headers.
- Total length is 12" (30cm) with 2.54mm Female to Female 50P 2 x 25 sockets.
- Wire: 28 AWG (7x36) Stranded 300V; Wire Pitch: 0.05" (1.27 mm) Center Spacing.
- Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins.
- 2pcs IDC Connector flat Ribbon cable, Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR jtag debuggers, in-system programmers, isp download, etc.
Full Specifications
| Wire | 28 AWG (7x36) Stranded 300V; Wire Pitch: 0.05" (1.27 mm) Center Spacing. |
|---|---|
| Brand | Antrader |
| Color | Rainbow |
| Gauge | 28.0 |
| Model | 50P-30CM |
| Cable Type | Ribbon |
| Item Shape | Flat |
| Unit Count | 2.0 Count |
| Part Number | AZ18073102 |
| Connector Type | 50 Pin Female to Female |
| Number of Pins | 50 |
| Maximum Voltage | 300 Volts (DC) |
| Special Feature | Flat Design, Ribbon Cable |
| Connector Gender | Female-to-Female |
| Compatible Devices | Monitor |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Connecting digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, and Atmel AVR jtag debuggers |
| Other Special Features of the Product | Flat Design, Ribbon Cable |
Ready to buy?
Antrader 2 Pieces 2.54mm Pitch 50 Pin 50 Way F/F Connector IDC Flat Rainbow Ribbon Cable 1ft 30cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Sim Racing Wheels for PC and Console in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- NVMe vs SATA for Gaming: WD Blue SN550 vs Crucial BX500 in 2026
- Steam Deck OLED vs ROG Xbox Ally X: Which Handheld Wins?
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- Best SSDs and Storage Adapters for Retro PC Builds in 2026
- Building a Period-Correct 1999 Quake III Arena LAN Rig: Voodoo3, Pentium III, and Win98 SE
- A Practical Look at the PlayStation Architecture — and Why It Still Matters
- How to run Qwen 3 14B on Apple M4 Pro
- Turn a Raspberry Pi Pico W Into a Driverless USB WiFi Adapter
- Best AIO Liquid Cooler for Ryzen X3D & High-End Intel (2026)
- Self-Hosting DeepSeek on an RTX 3060 12GB: What Fits in 2026
- China Mobile JT-4.1 Flash 236B: A Token-Efficient MoE and What It Takes to Self-Host
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- Best Budget PC Upgrades Under $250 in 2026
- Windows XP on Steam Deck: Retro Setup Guide
- Building a 2002 Windows XP Gaming Rig: GeForce 4 Ti, Sound BlasterX G6, CompactFlash Boot
- Crucial BX500 vs Samsung 970 EVO Plus: SATA vs NVMe
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Gaming CPU in 2026
- Best GPU for a NAS or Homelab Running Local LLMs (2026)
- Raspberry Pi 4 8GB in 2026: Still the Right Pick for Retro Emulation and Home Servers?
- Best SSD for a Local AI / LLM Workstation in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090