Outus 30 Pieces 2.6 x 0.8 x0.1 Inch Silicone Thermal Pad Reusable CPU SSD Thermal Conductive Silicone Pad Each Thick for Gpu Heatsink CPU Chip Heat Conduction or LED Heat Conduction(Dark Gray)
Bottom line: The Outus 30 Pieces 2.6 x 0.8 x0.1 Inch Silicone Thermal Pad Reusable CPU ($8.59 on Amazon as of 2026-10-20 22:17 UTC): 6.0 W/mK silica gel rated for CPU, GPU, SSD and VRM heat transfer; main trade-off: 6.0 W/mK trails premium pads that advertise 12-17 W/mK.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 6.0 W/mK silica gel rated for CPU, GPU, SSD and VRM heat transfer
- ✓ 30 pads per pack - enough bench stock for several full rebuilds
- ✓ Electrically insulating and anti-static, safe across memory and VRM areas
- ✓ Cuts with scissors to any gap shape, no mixing or cleanup like grease
Cons
- ✗ 6.0 W/mK trails premium pads that advertise 12-17 W/mK
- ✗ Only one thickness (about 0.1 in) - no thin option for tight gaps
- ✗ 2.6 x 0.8 in strips need piecing together for large GPU memory arrays
- ✗ Listing gives no Shore hardness, so compression fit is guesswork
Manufacturer description
The Outus 30-piece silicone thermal pad kit gives you a reusable alternative to messy thermal grease when you're reseating a GPU heatsink, cooling an SSD controller, or rebuilding a retro PC that has long since dried out its original paste. Each pad measures roughly 2.6 x 0.8 x 0.1 inches, and the silica gel compound is rated at 6.0 W/mK thermal conductivity to move heat from the chip into the heatsink. Because the material is electrically insulating, anti-static, and fire retardant, you can run pads across VRMs and memory chips without worrying about shorting a trace, and Outus rates the…
SpecPicks Verdict
SpecPicks scored Outus 30 Pieces 2.6 x 0.8 x0.1 Inch Silicone Thermal Pad Reusable… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Outus's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What is the thermal conductivity of these pads?
Outus rates the silica gel at 6.0 W/mK. That is mid-tier: fine for SSD controllers, VRMs, and general heatsink contact, but premium 12+ W/mK pads will do better on a heavily overclocked GPU.
How many pads come in the pack and what size are they?
You get 30 pieces, each about 2.6 x 0.8 x 0.1 inches. You cut them down with scissors to match the contact surface you are filling.
Are these safe to use over memory chips and circuit traces?
Yes. Outus lists the material as electrically insulating, anti-static, and fire retardant, with no corrosion or damage to metal, so it will not short components the way conductive paste can.
Can these replace thermal paste on a CPU?
They are designed as a replacement for heatsink compound grease and are listed for CPU, GPU, and heat sink use. For a bare-die CPU with a near-zero gap, paste still makes better contact than a 0.1 inch pad.
What temperature range can these handle?
Outus rates them from -40C to 200C without melting, which covers PC, laptop, LED, and automotive electronics duty. Check the product listing for current warranty terms.
Key Features
- Thermal Conductivity: quality thermal silica gel material with 6.0 walt/ thermal conductivity, our thermal pad nicely improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds
- Safety and Stability: electrical insulation, in -40 degree Centigrade - 200 degree Centigrade will not melt, wear-proof, anti-static, fire retardant, buffering, reliable, odorless, no corrosion, no stimulation, no damage to metal materials
- Suitable Size: the thermal pads are about 2.6 x 0.8 inch, totally 30 pieces suitable to fill contact surfaces gap, a nice assistant for both beginners and professionals
- Easy to Install: you can select the most suitable thickness and cut the required sizes; Appropriate replacement for traditional heat sink compound grease paste
- Widely Application: nicely replaces traditional heatsink compound grease paste, suitable for control board, motor, electronics, CPU, GPU, heat sink, power LED, auto mechanics, computer host, laptop, DVD, VCD, LID, Set-top box, LED IC and any cooling modules
Full Specifications
| Brand | Outus |
|---|---|
| Dimensions | 2.6 x 0.8 x0.1 inch |
| Easy to Install | you can select the most suitable thickness and cut the required sizes; Appropriate replacement for traditional heat sink compound grease paste |
| Package Dimensions | 4.72 x 3.35 x 0.67 inches |
Ready to buy?
Outus 30 Pieces 2.6 x 0.8 x0.1 Inch Silicone Thermal Pad Reusable CPU SSD Thermal Conductive Silicone Pad Each Thick for Gpu Heatsink CPU Chip Heat Conduction or LED Heat Conduction(Dark Gray) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Claude Code Cut 80% of Its System Prompt: What Changes for Local Agent Rigs
- Build a Pi Zero W Retro Handheld in 2026: Full Parts List and Setup
- Claude Fable 5: Anthropic Admits 'Wrong Tradeoff' on Throttling
- NVIDIA Cosmos 3 vs Ideogram 4.0: Which Open Image Model to Run on 12GB
- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- Best Plug-and-Play Retro & Budget Consoles in 2026: 5 Picks Ranked
- GLM-5.2 on an RTX 3060 12GB: Can the New Open-Weights Leader Run Local?
- Best SSD to Upgrade a PS4 in 2026
- Can a 12GB RTX 3060 Run Gemma 4 31B? Quantization & Tok/s Reality Check
- How to run Llama 3.1 8B on Apple M3 Ultra
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Glide vs OpenGL vs Direct3D: The API War That DirectX 9 Ended
- Best Cooler for a Ryzen 7 5800X: ML240L RGB V2 vs Kraken M22
- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for AM5 OC
- Intel-Scaler vLLM 0.21.0: What the New Release Changes for Intel GPU Inference
- Best SATA SSD to Upgrade Your PS4 Pro in 2026
- Best Gaming Mouse Pad for FPS Esports (2026)
- Raspberry Pi LLM GPU Guide: What Actually Works in 2026
- AI-Assisted Sound Card Driver Install on Vintage WinXP: How a Vision LLM Automates the Sound Blaster Audigy FX
- AIO vs Air on a Ryzen 7 5800X: Corsair ML240L vs Noctua NH-U12S
- Can the RTX 3060 12GB Run Qwen3-27B Locally in 2026?
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Running a Local Bug-Hunting LLM on an RTX 3060 12GB
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090