IKPEK 6 Pack Analog 3D Joysticks Replacement for PS5 Controller
Bottom line: The IKPEK 6 Pack Analog 3D Joysticks Replacement for PS5 Controller: Six EL6 3D analog sticks cover both sticks on up to three DualSense controllers; main trade-off: soldering iron required but not included in the kit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Six EL6 3D analog sticks cover both sticks on up to three DualSense controllers
- ✓ Six 2.3K ohm potentiometers included to fix drift at the sensor, not just the stick
- ✓ Six thumbstick caps and six protective rings replace worn or cracked tops
- ✓ 27 screws plus metal screwdriver, tweezer, pry tool and pry bar bundled
- ✓ Targets drift, dead zones, blind spots, stuttering and off-center sticks
Cons
- ✗ Soldering iron required but not included in the kit
- ✗ Fits PS5 DualSense only; not compatible with PS4 or Xbox controllers
- ✗ Desoldering the old module takes steady hands and basic electronics skill
- ✗ Only two thumbstick grips included versus six caps and six rings
Manufacturer description
Stick drift on your PS5 DualSense doesn't have to mean buying a new controller. The Ikpek 6-pack of analog joysticks gives you six EL6-model 3D analog stick modules built for the PlayStation 5 DualSense. That's enough to replace both sticks on up to three controllers, or to keep spares for later. Each joystick comes with its own 2.3K ohm potentiometer, the part that usually wears out and causes drift, stuttering, dead zones, creeping and sticks that won't center. The kit also covers the parts you can see: six thumbstick caps in ABS plastic, six ultra-thin protective rings and two thumbstick…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for IKPEK 6 Pack Analog 3D Joysticks Replacement for PS5 Controller, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Six EL6 3D analog sticks cover both sticks on up to three DualSense controllers"; the main trade-off is "Soldering iron required but not included in the kit". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these joysticks fit my PS4 or Xbox controller?
No. Ikpek lists these EL6 analog joysticks as compatible with the PS5 DualSense controller only. They do not fit PS4, Xbox One, Xbox One S or Xbox One X controllers.
Do I need a soldering iron to install these?
Yes. The joystick module is soldered to the DualSense board, and the kit does not include a soldering tool. You need your own soldering iron to remove the old module and install the new one.
What exactly comes in the box?
6 joysticks, 6 potentiometers (2.3K ohm), 6 thumbstick caps, 6 protective rings, 2 thumbstick grips, 27 screws, 1 metal cross screwdriver, 1 metal tweezer, 1 metal pry tool and 1 pry bar.
Will this fix stick drift on my DualSense?
The kit is meant for drift, stuttering, dead zones, creeping, blind spots and sticks that won't center. It includes new 2.3K ohm potentiometers along with the full EL6 joystick modules, so you can replace the worn parts.
How many controllers can I repair with one pack?
Each DualSense uses two analog sticks, so six joysticks can fully repair up to three controllers. You can also fix one or two and keep the rest as spares.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Compatible model】-- Replacement analog joystick compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- 【What you get】Package include -- 6 x Joystick, 6 x 2K3 Ohm Potentiometer, 6 x Thumbstick Cap, 6 x Protective Ring, 2 x Thumbstick Grip, 27 x Screw, 1 x Metal Cross Screwdriver, 1 x Metal Tweezer, 1 x Metal Pry tool, 1 x Pry bar. (You also need a soldering tool which isn‘t included in the kit.)
- 【6 × 3D Analog Joystick】-- Ikpek joysticks replacement's model number is EL6 for PS5 Controller, and the Potentiometer is 2.3K ohm. Repair your worn-out, damaged, drift, blind spots, dead spots, can't center analog joystick . Quality Guarantee -- The joystick replacement was test before shipment. And it is made of high quality metal, ABS plastic material. Make it has longer working life and used more accurately.
- 【6 x 2K3 Ohm Potentiometer】Design for PS5 controller -- Solve Most Joystick Problem: Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- 【6 × Thumbstick Cap + 27 x Screw for PS5 Controller + 6 x Protective Ring】Thumbstick Caps -- Made of premium ABS material, enduring and practical. Ideal replacement for your broken or cracked controller thumbsticks. Screws -- Replacement of screws can better help you repair the controller. Protective Ring -- 0.1 Ultra-thin protective ring compatible with PS5, PS4, Switch, Xbox controller,it will protect controllers from wear and tear, avoid powder, extend the life of controller.
Full Specifications
| Brand | Ikpek |
|---|---|
| Color | Green - 6pcs |
| Unit Count | 6 Count |
| Compatibility | PS5, PS4, Xbox, Switch |
| Hardware Platform | playstation 4 |
| Compatible Devices | Controller |
| Full listing title | IKPEK 6 Pack Analog 3D Joysticks Replacement for PS5 Controller, Joysticks Part with Repair Screwdriver Kit for Playstation 5 DualSense Controller |
Ready to buy?
IKPEK 6 Pack Analog 3D Joysticks Replacement for PS5 Controller, Joysticks Part with Repair Screwdriver Kit for Playstation 5 DualSense Controller is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Headsets for PS5 and PC in 2026
- Best Budget SSDs for Gaming PCs and Consoles in 2026
- CompactFlash Imaging for Retro PCs: A CF133 + IDE Workflow
- How to run Qwen 3 32B on Apple M4 Max
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Building a 2002 Windows XP Gaming Rig: GeForce 4 Ti, Sound BlasterX G6, CompactFlash Boot
- Intel Kills BigDL: The Best Local-LLM Stack to Switch To in 2026
- RTX 5080 vs RTX 4090: Which GPU Is Best in 2026?
- gpt-oss 120B at Home: RTX 3060 12GB Offload vs Ryzen 7 5800X CPU-Only
- Intel Arc LLM Performance: A770, B580 & Pro B60 Guide 2025
- 768GB Intel Optane DIMMs Running a 1-Trillion-Parameter LLM: How the Build Actually Works
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best Budget AM4 Build for Local LLM Inference in 2026
- Best AMD Ryzen 5000 CPU for Gaming in 2026: 5 Picks
- Build a Raspberry Pi 4 8GB Starter Home Lab in 2026: BOM + First Services
- Gemini-SQL2 Tops Text-to-SQL — Can a 12GB RTX 3060 Run Local SQL Models Instead?
- 48GB vs 64GB DDR5 for Gaming and AI: Worth It?
- LEGO Batman: Legacy of the Dark Knight Steam Deck FPS
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
- Best Streaming Gear for Starting a Channel in 2026
- Voodoo 5 6000 Stability: Hangs, Wedges and a Bricked Board
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Best GPU for AI code generation in 2026
- Cheap 80s Keyboard Gets a Modern Brain Upgrade
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090