Skip to main content
Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors Compatible with 3B+/3/2 B/B+/ Banana Pi Windows10/8.1/8/7 Driver Free 5-Point Raspberry pi Display
Head Sun

Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors

Bottom line: The Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'': 1024x600 IPS panel with 170-degree viewing and 16.7M colors; main trade-off: android and Linux need manual configuration, not plug and play.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar emulation hardware

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ 1024x600 IPS panel with 170-degree viewing and 16.7M colors
  • ✓ Driver-free plug and play on Raspberry Pi, Win7/8/8.1/10
  • ✓ Powered over USB alone, no separate power brick needed
  • ✓ 5-point capacitive touch calibrated to the screen edges
  • ✓ Compact 164.9 x 100 x 5.7mm module fits Pi 3B+/3/2 B/B+ builds

Cons

  • ✗ Android and Linux need manual configuration, not plug and play
  • ✗ Pi 4 requires a micro-HDMI cable that differs from the Pi 3 HDMI cable
  • ✗ 600px vertical height is tight for desktop emulation front-ends
  • ✗ Low-power design means no built-in speakers or audio output

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7''… using a rating × review-volume × price-fit model applied to published specs and reviews across the emulation hardware category. Head Sun's emulation hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • HD VISUAL ENJOYMENT: Raspberry Pi 7inch touchscreen with HD 1024x600 resolution, 16.7M(8bit) color numbers give high color restore the display. Rectangular ratio 16:9 display format conversion. IPS 170° full wide viewing angle gives you a crystal-clear viewing experience of all your content.
  • MULTIPLE APPLICATION: Raspberry pi monitor supports Raspberry/Win7/Win8/Win10(Plug and play), Android/Linux (need to be configured first). ( Note: the HDMI-Micro HDMI cable especially for Raspberry Pi 4, HDMI-HDMI cable for Raspberry Pi 3)
  • LOW COMSUMPTION：Low power consumption and have a good effect connect with a Windows computer, no trouble with installing drivers for various systems. Our 7 inch raspberry pi display/touchscreen monitor give your a good using experience.
  • WIDE TOUCH AREA: The module size with 164.9(W)X100.0(H)x5.7(T)mm, and the active area is 154.08(W)X 85.92(H)mm. Most of the screens on the market will have these touch problems if the software is not adjusted, but this small HDMI screen/display no worries to reach the side of the screen.
  • PLUG & PLAY: The 7inch Raspberry pi monitors, equipped with Micro USB and HDMI port support and connect the screens to the device via the HDMI interface and power it via USB. To achieve the touch function powered by USB, do not require a power cord and drive-free.

Full Specifications

BrandHead Sun
ShapeRectangle
Model Name7 Inch Monitor
ResolutionSVGA Wide
Screen Size7 inches
Aspect Ratio16:9
ConnectivityUSB
Display TypeLCD/Monitor
Model NumberHS-007
CompatibilityAndroid, Linux
Mounting TypeWall Mount
Screen FinishGlossy
Series Number7
Viewing Angle170 degrees
Contrast Ratio2000:1
Total Usb Ports1
Native Resolution1024x600
Compatible DevicesLaptop, Desktop
Display TechnologyLCD
Additional FeaturesTouchscreen
Full listing titleRaspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors Compatible with 3B+/3/2 B/B+/ Banana Pi Windows10/8.1/8/7 Driver Free 5-Point Raspberry pi Display

Ready to buy?

Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors Compatible with 3B+/3/2 B/B+/ Banana Pi Windows10/8.1/8/7 Driver Free 5-Point Raspberry pi Display is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Emulation Hardware

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Raspberry Pi Screen 7inch Monitor IPS 1024x600 HDMI Capacative 7'' Touch Screen Monitors Compatible with 3B+/3/2 B/B+/ Banana Pi Windows10/8.1/8/7 Driver Free 5-Point Raspberry pi Display
View on Amazon →