GLOTRENDS 300mm PCIe 4.0 X16 Riser Cable for PCIe 4.0/3.0 GPUs
Bottom line: The GLOTRENDS 300mm PCIe 4.0 X16 Riser Cable for PCIe 4.0/3.0 GPUs: Full PCIe 4.0 x16 bandwidth up to 32GB/s peak with compatible hardware; main trade-off: hot swapping is not supported.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full PCIe 4.0 x16 bandwidth up to 32GB/s peak with compatible hardware
- ✓ 30AWG silver-plated copper wire for stronger signal conductivity
- ✓ Each differential pair individually foil-wrapped to cut EMI
- ✓ No driver install; plug-and-play with RTX 40 and RX 7000 GPUs
- ✓ Lifetime tech support for GPU and motherboard compatibility
Cons
- ✗ Hot swapping is not supported
- ✗ Needs Intel 11th Gen or Ryzen 5000 CPU for full PCIe 4.0 speed
- ✗ Requires a direct CPU-connected x16 slot for peak performance
- ✗ Lists 32GB dual-channel RAM among its stated requirements
SpecPicks Verdict
SpecPicks scored GLOTRENDS 300mm PCIe 4.0 X16 Riser Cable for PCIe 4.0/3.0 GPUs using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. GLOTRENDS's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- PCIE 4.0 x16 Riser Cable – Unleash 32GB/s Peak Speed: To achieve full PCIE 4.0 x16 bandwidth (32GB/s) with compatible hardware. No driver installation required (hot swapping not supported)
- Hardware requirements: 1) CPU: Intel 11th Gen or Ryzen 5000 Series and above; 2) GPUs: GeForce RTX 40 Series or AMD Radeon RX 7000 Series; 3) RAM: 32GB dual-channel; 4) Lane: Direct CPU-connected PCIE 4.0 x16 slot for optimal performance.
- Enhanced Signal Integrity with Advanced EMI Shielding: Each differential signal pair is individually foil-wrapped, minimizing interference. Constructed with 30AWG silver-plated copper for superior conductivity
- Packaged in an anti-static bag, try not to touch the gold finger before use, as handprints or stains will affect signal performance
- Get lifetime tech support - contact us for troubleshooting manual, including GPU, motherboard compatibility issues, how to choose PCIE riser cable length, and more
Full Specifications
| Brand | GLOTRENDS |
|---|---|
| Color | Black |
| Model | PCIE40-X16-300MM-0090D |
| Cable Type | The core is Silver-plated Copper wrapped in Teflon and Aluminum foil with a PVC protective coating on the outside |
| Item Shape | Flat |
| Model Name | PCIE40-X16-300MM-0090D |
| Unit Count | 1 Count |
| Item Length | 30 centimeters |
| Part Number | PCIE40-30-90 |
| Connector Type | Female: 90 Degree Angle, Male: 0 Degree Angle |
| Number of Pins | 24 |
| Number of Items | 1 |
| Special Feature | 300mm Length, 90 Degree Right Angle |
| Connector Gender | Male-to-Female |
| Compatible Devices | AMD Radeon RX7000/RX6000 Series, GeForce RTX 40/30 Series |
| Data Transfer Rate | 16 gigabytes_per_second |
| Included Components | PCIe 4.0 Riser Cable |
| Indoor Outdoor Usage | Indoor |
| Customer Package Type | FFP |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | 300mm PCIe 4.0 X16 Riser Cable for PCIe 4.0/3.0 GPUs, Such as GeForce RTX 40/30 Series and AMD Radeon RX7000/RX6000 Series, etc |
Ready to buy?
300mm PCIe 4.0 X16 Riser Cable for PCIe 4.0/3.0 GPUs, Such as GeForce RTX 40/30 Series and AMD Radeon RX7000/RX6000 Series, etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best 4K Gaming Monitor Under $500 in 2026
- Ex-Sega Engineer's 'Super Realistic' CRT Emulator — What It Means for Retro Mini-Consoles
- Best Gaming Controllers for PC in 2026: 5 Picks Tested Across Genres
- Best Coding LLM Stack for an RTX 3060 12GB and 32GB RAM (2026)
- Boot Windows 98 from CompactFlash: Transcend CF133 + IDE Adapter Guide
- Best 1TB SATA SSD for Cloning Old Drives and OS Migrations 2026
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- Build a RetroPie Handheld in 2026: A Complete Step-by-Step Guide
- Samsung's 256GB microSD Falls to $47.99 — Plus the SSD Sidegrade
- Field Report: Running Qwen 3.6 35B-A3B on a 32GB M2 Mac
- Windows XP Gaming Setup Guide: Hardware & Drivers (2025)
- Can a 12GB RTX 3060 Run a 70B LLM? The Offload Reality Check
- Ryzen 5 5600G vs Ryzen 7 5700X: Which Wins for Budget 1080p Gaming?
- Mac Mini M4 vs RTX 3060 12GB for Local LLMs: Which Actually Wins?
- Samsung 256GB microSD Drops to $47.99 — 40% Off Storage Deal
- Best Budget GPU for Stable Diffusion and SDXL in 2026
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- Llama.cpp Console Released: What Changes for Local LLM Operators on a 12GB GPU
- Best SSD for a Retro PC Build: SATA, CompactFlash, or IDE Bridge?
- Ryzen AI Max 400 192GB vs RTX 3060 for Local LLMs
- Ling 2.6 1T on Local Hardware: Can You Actually Run a Trillion-Parameter Model at Home in 2026?
- Best Retro Gaming Console to Buy in 2026
- Small Form Factor Gaming PC Build Guide for 2024
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090