Genmitsu 4th Axis Rotary Module for 4040 and 3030 Series CNC Machine
Bottom line: Per its Amazon listing, the Genmitsu 4th Axis Rotary Module for 4040 and 3030 Series CNC Machine ($219.00 on Amazon as of 2026-11-20 05:30 UTC): versatile dimensions: Adapt to various project requirements with a center height of 50mm; applicable Material diameter: 2-50mm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Versatile dimensions: Adapt to various project requirements with a center height of 50mm
- ✓ Applicable Material diameter: 2-50mm
- ✓ Backed by Genmitsu's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Genmitsu 4th Axis Rotary Module for 4040 and 3030 Series CNC Machine, so this read rests on the manufacturer's listed specs and the current price in the displays & upscalers category (how we evaluate). Compare with similarly-priced alternatives in the displays & upscalers category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Discover the Possibilities: The 4th Axis rotary module kit is a drop-in upgrade that enables your 4040-PRO, 4040-PRO MAX, 3030-PROVer Ultra, 3030-PROVer MAX CNC machine to carve from different angles and positions, or with the right software, full rotary carving. It allows for the creation of complex parts with curved or angled features that are not achievable with a traditional 3-axis CNC machine. Additionally, the G-code for the 4th axis must be sent using an offline controller (ASIN: B0C582HQ6Z), which should be ordered together with the 4th axis to ensure proper functionality (For the 4040 series only, the 3030 series comes with the offline controller.)
- NEMA17 Planetary Geared Stepper Motor: Take advantage of the high torque provided by the NEMA17 motor, which allows the motion system to rotate workpieces with more force and precision than any other belt-driven rotary modules on the market.
- Versatile dimensions: Adapt to various project requirements with a center height of 50mm, total height of 86mm, and material lengths with tailstock from 10-100mm; without tailstock from 10-200mm for flexibility. Applicable Material diameter: 2-50mm.
- Precision Control: Utilize the 10:1 reduction ratio for precise control, offering a minimum angle of 0.1° and a maximum angular speed of 300° per second, ensuring high speed and unparalleled accuracy.
- Software & Controller: To use a 4th axis on your CNC machine, you will need CAD/CAM software that can generate toolpaths for rotary motion. While options like Fusion 360 and Vectric are recommended, it's important to note that most software capable of generating 4th axis toolpaths is not free.
Full Specifications
| Brand | Genmitsu |
|---|---|
| Capacity | 50 millimeters |
| Material | Aluminum |
| Unit Count | 1 Count |
| Model Number | 4th Axis |
| Item Diameter | 50 millimeters |
| Material Type | Aluminum |
| Item Type Name | CNC 4th Axis Rotary Kit |
| Number of Items | 1 |
| Compatible Devices | CNC Machine |
| Included Components | 4th Axis Rotary Kit |
| Manufacturer Part Number | 4th Axis |
Ready to buy?
Genmitsu 4th Axis Rotary Module for 4040 and 3030 Series CNC Machine is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Displays & Upscalers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- CRT PC Monitors for Retro Gaming: 2026 Buying Guide
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- 8BitDo Pro 2 vs DualSense: Best Controller for PC Gaming in 2026
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- Intel Arc LLM Support: What Works in 2026
- Raspberry Pi 4 8GB Homelab in 2026: Jellyfin, Pi-hole and Home Assistant on One Board
- DIY Steam Controller Puck Adds Xbox, Switch and PS Emulation Modes
- AMD Ryzen AI Halo vs NVIDIA DGX Spark — or Just an RTX 3060?
- IBM Granite 4.1 8B vs Qwen 3.6 27B: Which Small Local Model Wins on a 16GB GPU?
- Intel Arc Pro B70 Linux Gaming Performance 2026
- NVIDIA GeForce GTX 10 Pascal GPUs: 10th Anniversary
- Best Raspberry Pi Alternative for Klipper in 2026 (and When the Pi Still Wins)
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Ryzen 7 5800X vs 5700X vs 5600G for a Budget Local-LLM Rig
- No Wonder My CPU Was Hitting 100°C: 7 Build Mistakes
- Best Sim Racing Gear for PC in 2026: 5 Picks Tested by Spec
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Steam Controller (2026) Scores 83/100 in Early Reviews
- Is 8GB RAM Enough in 2026? A Real-World Performance Analysis
- Best SSD for Steam Deck and Handheld Gaming Storage Expansion 2026
- Forza Horizon 6 Runs Surprisingly Well on Steam Deck — Here's What Players Are Reporting
- Best AIO Liquid CPU Coolers for High-TDP Builds in 2026
- Llama 4 Scout: RTX 3060 12GB Expert Offload vs Ryzen 7 5800X CPU-Only (2026)
- Best SSD and Controller Pairing for a Living-Room Gaming PC
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090