NICE-POWER DC Power Supply Variable
Bottom line: The NICE-POWER DC Power Supply Variable: Encoder knob sets each digit directly instead of hunting with a potentiometer; main trade-off: 3-digit display limits readout precision versus 4-digit lab supplies.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Encoder knob sets each digit directly instead of hunting with a potentiometer
- ✓ 0.1V and 0.01A resolution across the full 0-30V / 0-5A range
- ✓ 1.54 lb and 6.5 x 4.0 x 3.2 in, so it frees up bench space
- ✓ Over-voltage, over-current, over-power, over-temp and short-circuit protection built in
- ✓ 100-240V input works on both 110V and 230V outlets, FCC/CE certified
Cons
- ✗ 3-digit display limits readout precision versus 4-digit lab supplies
- ✗ 5A ceiling rules out higher-draw electroplating and burn-in loads
- ✗ Fan runs whenever the unit is powered on, not just under load
- ✗ No USB or serial port, so no logging or PC control
SpecPicks Verdict
SpecPicks scored NICE-POWER DC Power Supply Variable using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. NICE-POWER's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Upgraded High-Precision Encoder Knob: Just "set" Voltage and Current instead of "adjust". You can press the Voltage and Current encoder knob to select the Digit you want to adjust, then rotate the knob to set the value from 0-9. Each Digit can be set easily by the accurate encoder knob. The encoder switch replaces the potentiometer switch, making your work easier, more accurate and efficient
- Precise 3-Digit LED Display: The NICE-POWER DC bench power supply has a resolution of 0.1V and 0.01A, and you can easily adjust it in the range of 0-30V and 0-5A. The 3-digit back-lit LED display provides more accurate and clearly visible readings for the voltage and current value, even in conditions of low voltage
- Small and Diverse Applications: Worried about the bulky power supply? This compact and sophisticated DC power supply weighs much less than a laptop at just 1.54 pounds, saving more space on your workbench. And you can use it in various scenarios such as laboratory, LED test, repair, electrolysis, burn-in test, electroplating, brush plating, electronic DIY, etc
- Safe and Reliable to Use: Safety is our priority. The DC power supply is FCC/CE certified. When the DC power supply is powered on, the built-in fan will start working in order to effectively dissipate the heat to extend the service life, low noise and low ripple. The power supply is durable and compact. Productive work since the power supply comes multiple protection of Over-voltage, over-current, over-power, over-temperature, short-circuit powerful protection function
- Packaging and After-Sales: 1 x DC Power Supply, 1 x Power Cord, 1x Output Load Cord, 1 x User Manual. The variable dc power supply size is 6.5*4.0*3.2 inch, Weight is 1.54lb. You can easily take the DC power supply to work. We provide a 12-month repair policy. If you have any technical questions about our power supply, please do not hesitate to contact us
- Please note: This DC power supply input voltage range is 100~240V and can be used with 110V and 230V conditions
Full Specifications
| Brand | NICE-POWER |
|---|---|
| Weight | 1.54lb |
| Wattage | 150 watts |
| Model Name | DC Power Supply Variable |
| Unit Count | 1 Count |
| Form Factor | Compact box |
| Please note | This DC power supply input voltage range is 100~240V and can be used with 110V and 230V conditions |
| Model Number | SPS-E305 |
| Compatibility | Switch |
| Built-In Media | Power Supply, Power Cord, Output Load Cord, User's Manual, Warranty Card |
| Connector Type | Barrel Jack or Ring Terminal |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 150 watts |
| Item Dimensions | 6.5 x 4 x 3.2 inches |
| Mfr Part Number | SPS-E305 |
| Connector Quantity | 2 |
| Number of Connectors | 2 |
| Maximum Input Voltage | 240 volts_of_alternating_current |
| Minimum Input Voltage | 100 volts_of_direct_current |
| Full listing title | NICE-POWER DC Power Supply Variable, 30V 5A Adjustable Switching Regulated Power Supply with Encoder, Upgraded 3-Digits LED Display, Electroplating DIY LED Test Mini Regulated DC Bench Power Supply |
Ready to buy?
NICE-POWER DC Power Supply Variable, 30V 5A Adjustable Switching Regulated Power Supply with Encoder, Upgraded 3-Digits LED Display, Electroplating DIY LED Test Mini Regulated DC Bench Power Supply is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Logitech G29 vs HORI vs Thrustmaster: Best Sim Racing Wheel for Beginners
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- Best Budget Ryzen Gaming PC Parts in 2026: 5 Picks That Punch Up
- Logitech G502 Hero vs Modern FPS Mice: Is the Classic Still Worth It in 2026?
- RTX 5070 Ti vs RTX 5080: Is the $400 Step-Up Worth It at 1440p and 4K?
- CompactFlash as an IDE Boot Drive: The Definitive Win98 Storage Guide
- FREENOVE Ultimate Starter Kit on Raspberry Pi 4 8GB: 30 Projects Tested for First-Time Makers and Robotics…
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Best CPU Cooler for Ryzen 7 9800X3D in 2026
- Best Dorm Room Gaming Setup in 2026: 5 Picks That Fit One Desk
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Best USB Microphone and Streaming Kit for Creators in 2026
- Silent, SD-Free Retro Storage: CompactFlash + IDE on Win98/XP
- Best GPU Under $400 for Llama-Class 8B Models in 2026
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- Viral: Hobbyists Are Tracking Every Plane With a $50 Raspberry Pi - Here Is What You Need
- CompactFlash Boot Drive for Windows 98: Transcend CF133 Setup and Benchmarks
- Best Budget SSD for a Steam Library in 2026: SATA vs NVMe on a Tight Budget
- Best Internal SSDs Under $100 in 2026
- Intel Arc vs NVIDIA 2026: Local LLM Tokens per Dollar
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090