Skip to main content
ELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16 Card with Aluminum Heat Sink M.2 to PCI-Express SSD Expansion Card Support 2230 2242 2260 2280 Max 4TB for Windows/Linux/Mac os
ELUTENG

ELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16 Card

Bottom line: The ELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16: Runs PCIe 5.0 NVMe SSDs, backward compatible with 4.0 and 3.0 drives; main trade-off: M.2 SATA (NGFF) drives not supported, NVMe protocol only.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Runs PCIe 5.0 NVMe SSDs, backward compatible with 4.0 and 3.0 drives
  • ✓ Aluminum heatsink lowers SSD temps for stable sustained performance
  • ✓ Fits 2230/2242/2260/2280 M-Key and B&M-Key NVMe SSDs
  • ✓ Plug-and-play on Windows 8/10/11 and above, no driver needed
  • ✓ Uses full x4/x8/x16 lanes for up to 32Gbps theoretical read speed

Cons

  • ✗ M.2 SATA (NGFF) drives not supported, NVMe protocol only
  • ✗ Needs an x4/x8/x16 slot, won't work in PCIe x1 or PCI slots
  • ✗ Booting as a system disk requires BIOS PCIe-boot support
  • ✗ Windows 7 and older need a manual SSD driver install

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for ELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Runs PCIe 5.0 NVMe SSDs, backward compatible with 4.0 and 3.0 drives"; the main trade-off is "M.2 SATA (NGFF) drives not supported, NVMe protocol only". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【PCIE to M.2 adapter】Compatible with 2230/2242/2260/2280 M.2 PCIE (NVMe) M-Key/B&M key SSDs. *Note: M.2 NGFF (SATA) is not supported; PCI-e protocol SSDs with NVME specification must be readable in WIN10. To boot as a system disk, the motherboard BIOS must support PCI-e booting.
  • 【Support List】Expansion card support: PCIe 4X / 8X / 16X, M-Key/B&M-key PCIE to M.2 adapter. *Note: PCI-E 1x and PCI slots are not supported; MSATA and B-KEY interfaces are not supported.
  • 【High-speed Transfer】The adapter uses the NVMe protocol and PCI-E lanes, the maximum read speed reaches 32 Gbp/s (theoretical speed). This greatly reduces the transfer time for large files. *Note: The actual transfer speed depends on the device interface and working environment.
  • 【Safe and Stable】Solid-state capacitors are used for voltage regulation, which prevents current waves from being generated in the event of SSD damage. It can operate stably under high and low temperature conditions to protect the hard disk. PCIE to M.2 adapter size: 140*35mm (L*W), compatible with Windows 7/10/11 system, no driver is needed for win8 and above system, driver is needed for SSD in win7 and below system.
  • 【Effective Heat Dissipation】Aluminum heatsink design reduces the temperature generated by the SSD during operation, thus stabilizing the performance of the SSD. This not only stabilizes the performance of the SSD, but also extends the life of the drive.
  • 【PCIe 5.0 Ultra-Fast Transfer Speeds】This adapter supports the latest PCIe 5.0 SSDs and is backward compatible with PCIe 4.0 and 3.0. It is plug-and-play and requires no driver installation. Note: Some adapters have 'PCIe 4.0/3.0' printed on the heatsink, but there is no difference in actual performance or compatibility, so please use them with confidence.

Full Specifications

BrandELUTENG
StyleSleek and High-performance
Style NameSleek and High-performance
Model NumberELT_ADAPTER CARD_NVME_PCIE4.0_GY
CompatibilityMac, Linux
Built-In MediaNon
Mfr Part NumberELT_ADAPTER CARD_NVME_PCIE4.0_GY
Number of Items1
Compatible DevicesPersonal Computer, Laptop
Hardware InterfacePCI
【Support List】Expansion card supportPCIe 4X / 8X / 16X, M-Key/B&M-key PCIE to M.2 adapter. *Note: PCI-E 1x and PCI slots are not supported; MSATA and B-KEY interfaces are not supported.
Full listing titleELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16 Card with Aluminum Heat Sink M.2 to PCI-Express SSD Expansion Card Support 2230 2242 2260 2280 Max 4TB for Windows/Linux/Mac os

Ready to buy?

ELUTENG NVMe PCIe 5.0/4.0/3.0 Adapter NVMe M.2 SSD to PCIe X4/X8/X16 Card with Aluminum Heat Sink M.2 to PCI-Express SSD Expansion Card Support 2230 2242 2260 2280 Max 4TB for Windows/Linux/Mac os is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →