Skip to main content
Binardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G/10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal
Binardat

Binardat 8 Port 10 Gigabit SFP+ Managed Switch

Bottom line: The Binardat 8 Port 10 Gigabit SFP+ Managed Switch: All 8 SFP+ ports run 10G non-blocking at 160Gbps switching capacity; main trade-off: SFP+ modules not included, adding real cost to the 125.99 build price.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar networking

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For home networking and Wi-Fi gear, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ All 8 SFP+ ports run 10G non-blocking at 160Gbps switching capacity
  • ✓ Fanless metal chassis runs silent for office or bedroom rack placement
  • ✓ Open SFP slots take any vendor module, 1G/2.5G/10G, no encryption lock
  • ✓ Managed via web UI, console, telnet, or SSH with SNMP and ACL support

Cons

  • ✗ SFP+ modules not included, adding real cost to the 125.99 build price
  • ✗ No RJ45 copper ports at all, so direct Ethernet cable runs are impossible
  • ✗ DAC cables need a manual web-UI toggle under Port_Config to be recognized
  • ✗ Cheap or off-brand optical modules may fail to negotiate 10G link rates

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Binardat 8 Port 10 Gigabit SFP+ Managed Switch using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. Binardat's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 10G SFP+ Slot: 8 x 10Gbps SFP+ ports, support 1G/2.5G/10G SFP module. It is recommended to use high-quality optical modules and fibers to achieve the best transmission rate
  • L3/L2 Web Managed: supports L3, IPv4/IPv6 management, static routing, OSPF, RIP, BGP4, DHCP server, QoS, ACL, SNMP, STP/RSTP/MSTP (ERPS), bandwidth control, flow control, Spanning Tree, link aggregation, loop detection; support Vet configuration LAN, IP-IP-IP. . MAC-VLAN Port binding, device/port status request. Compatible with console/telnet/SSH
  • 160Gbps Bandwidth:The switching capacity is 160Gbps, higher data bandwidth, all ports support 10G non-blocking line speed up and downstream.
  • Standard SFP Slot: open standard SFP slot interface, no encryption, multi-mode compatible, single mode, SFP to RJ45 module. ***SFP module not included, direct connection to network cable is not supported***
  • Widely used: metal housing, fanless design, quiet and stable operation, tabletop installation and wall mount, suitable for high-speed and long distance fiber networks, used in home, office, data center, etc
  • Note: If the optical module cannot be recognized, please use the 10G rate of a new well-known optical module. If the DAC cable cannot be recognized, enter the web interface and enable DAC support: switch_config→port_config→ Switch_Config -> Port_Config -> Port_10G_Mode

Full Specifications

BrandBinardat
ColorBlack
Weight10g
Voltage12 volts_of_direct_current
PlatformNot Machine Specific
InterfaceSFP
Switch TypeManaged
Model Number8x10G SFP Managed
CompatibilitySwitch, Mac
Built-In MediaSFP Switch 10g
Mfr Part Number10G08-0800GSM
Number of Items1
Number of Ports8
160Gbps BandwidthThe switching capacity is 160Gbps, higher data bandwidth, all ports support 10G non-blocking line speed up and downstream.
Case Material TypeMetal
Compatible DevicesOffice
Data Transfer Rate10 gigabits_per_second
Included ComponentsSFP Switch 10g
Item Dimensions L x W x H6.6"L x 3.7"W x 1.25"H
Full listing titleBinardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G/10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal

Ready to buy?

Binardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G/10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Networking

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Binardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G/10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal
View on Amazon →