JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card
Bottom line: The JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category, priced around $7.98 on Amazon as of 2026-11-22 15:15 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Before you buy
- Needs a free PCIe slot — check which of your board's slots are wired for it
Manufacturer description
JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card for 1U / 2U Server CasePCI-Express 16x 3.0 Riser Card 90 DegreeFeatures:1.This 16x PCI Express Riser Card lets you install a full-sized PCI Express card in a 1U server case, eliminating the expense of purchasing small form factor PCI-e cards.2.The PCI-Express 16X Riser Card makes the PCI-Express Card away from motherboard3.Golden finger protection cover design.4.With the PCI-Express socket directly in line with the socket on the motherboard .5. It is the right angle riser for the PCI Express X16 buses. The connector is…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card, so this read rests on the manufacturer's listed specs and the current price in the expansion cards category (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- PCI-Express 3.0 16x Riser Card: Install a full-sized PCI Express card in a 1U server case, eliminating the expense of purchasing small form factor PCI-e cards.
- PCI-Express 4.0 16x Riser Card: Install a full-sized PCI Express card in a 1U or 2U server case, eliminating the expense of purchasing small form factor PCIe cards.
- It is the right angle riser for the PCI Express X16 buses. The connector is soldered on the component side (B side) of the board.
- When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard.
- Golden finger protection cover and dustproof design. The PCI-Express 16X Riser Card makes the PCI-Express Card away from motherboard.
Full Specifications
| Brand | JMT |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Unit Count | 1 Count |
| Model Number | 16x Riser Card 3.0/4.0 |
| Mfr Part Number | 16x Riser Card |
| Number of Items | 1 |
| Compatible Devices | Graphics Card, Sound Card, Network Card |
| Hardware Interface | PCI |
| Warranty Description | 1 |
| PCI-Express 3.0 16x Riser Card | Install a full-sized PCI Express card in a 1U server case, eliminating the expense of purchasing small form factor PCI-e cards. |
| PCI-Express 4.0 16x Riser Card | Install a full-sized PCI Express card in a 1U or 2U server case, eliminating the expense of purchasing small form factor PCIe cards. |
| Full listing title | JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card for 1U / 2U Server Case (PCI-E 3.0 for 1U) |
Ready to buy?
JMT PCI-Express 3.0/4.0 16x Riser Card 90 Degree High Speed Riser Card for 1U / 2U Server Case (PCI-E 3.0 for 1U) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- The Sound Blaster Monopoly: How Creative Owned Every PC — and What to Buy Now
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- DeepSeek Seeks More Cash Weeks After $7B Round
- Build a Magic Mirror 2 Smart Home Hub (2026)
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- Reve 2.0 Debuts at #2: Can You Run Competitive Image Models on an RTX 3060 12GB?
- Coreboot + AMD openSIL: Windows 11 Works on MSI Ryzen
- Best GPU for 1080p Gaming in 2026: Where the RTX 3060 12GB Lands
- Raspberry Pi 4 8GB vs Pi 5 vs Pi Zero W for a 2026 Homelab
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Local AI and Gaming Setup Picks 2026: 5 Buys With Price Anchors
- Black Friday Monitor Deals 2026: 5 Picks From $100 1080p to 240Hz OLED
- A DIY Wireless Fingerprint Authorization Device Turns Heads on Hackaday
- Samsung Odyssey OLED G9 Drops $700 — and a Cheaper 4K Path
- Patch-to-Exploit in Hours: Why a Local Security LLM Rig Now Makes Sense
- Build a Raspberry Pi Zero Cyberdeck in 2026: Parts, Wiring and a Working BOM
- WoW Mythic+ 3500 on Steam Deck: Is It Possible?
- Best 4K Monitor for PS5 (4K/120Hz) in 2026
- Can a Raspberry Pi Zero W Run a Local LLM in 2026? A Tiny-Model Reality Check
- Building a Sim Racing Cockpit Under $500: Logitech G29 + Thrustmaster TH8A Shifter
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Best Mouse and Mousepad for FPS Aim Training in 2026
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090