Skip to main content
Digicharge Lens Protective Cover for PS VR2, PS VR 2 Glasses Cap, PSVR2 Protector Dustproof & Anti-Scratch Lens Shield, 14mm Thick Foam, Protects All Headset from Dust including sensor, Not Just Lens
DigiCharge

Digicharge Lens Protective Cover for PS VR2

Bottom line: The Digicharge Lens Protective Cover for PS VR2: Covers the whole eyepiece area, sensors included, not just the two lenses; main trade-off: fits the PS VR2 only; no fit for the original PS VR or other headsets.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC VR headsets, synthesises manufacturer specs and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Covers the whole eyepiece area, sensors included, not just the two lenses
  • ✓ 14mm foam, which DigiCharge says is 3-4x thicker than typical lens caps
  • ✓ Soft anti-scratch fabric face sits against the optics
  • ✓ Breathable foam helps stop condensation forming on the lenses
  • ✓ Rinse in clean water and reuse; blocks sunlight from reaching the lenses

Cons

  • ✗ Fits the PS VR2 only; no fit for the original PS VR or other headsets
  • ✗ Has to dry fully after washing before it goes back on
  • ✗ Thick foam adds bulk to a tight storage case or bag
  • ✗ Protects the eyepiece only; the strap and outer shell stay exposed

Manufacturer description

Protect your PlayStation VR2 between sessions with the DigiCharge Lens Protective Cover. Most lens caps cover only the optics. This PS VR2 lens cover fits over the whole eyepiece area, so it also shields the headset's sensors from dust, scratches and stray light. The cover is 14mm thick, which DigiCharge says is 3-4 times thicker than other lens covers. It is made of dense foam sponge with a soft, anti-scratch fabric face. The extra depth helps absorb small knocks when the headset sits on a shelf or goes into a bag. The foam is also breathable, which helps stop moisture condensing on the…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Digicharge Lens Protective Cover for PS VR2, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. On the listing's own facts, the case for it is "Covers the whole eyepiece area, sensors included, not just the two lenses"; the main trade-off is "Fits the PS VR2 only; no fit for the original PS VR or other headsets". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this lens cover fit the original PlayStation VR or a Meta Quest?

No. DigiCharge says this cover is made only for the PS VR2 headset. It is not designed for the original PS VR, Meta Quest or any other VR headset.

Does it protect the PS VR2 sensors or only the lenses?

It covers the whole eyepiece area, including the sensors around the lenses. Many basic lens caps cover only the optics.

How thick is the cover and what is it made of?

It is 14mm thick, made of dense foam sponge with a soft anti-scratch fabric surface. DigiCharge says that is 3-4 times thicker than other lens covers.

How do I clean the DigiCharge PS VR2 lens cover?

Rinse off dust and dirt with clean water, then let the cover air-dry fully before putting it back on the headset. It is made to be washed and reused many times.

Can I leave my PS VR2 near a window with this cover on?

Yes, that is one of its main uses. The cover blocks bright light and sunlight from reaching the lenses, which protects the optics while the headset is stored. Taking the headset out of direct sun is still the safest choice.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • High Quality & Intelligent Design: Unlike other lens caps, this product protects the whole of the eyepiece area including important sensors. This genuine Digicharge PS VR2 headset lens cover is made from high density foam sponge with premium soft anti-scratch fabric. The lens cap is breathable to prevent moisture condensation.
  • Specific for the PSVR2: This Authentic Digicharge VR lens cover is compatible with the PS VR 2 headset only.
  • Ultimate Protection: This premium lens cover is 14mm thick which is 3-4 times more than other lens covers. The increased density provides the maximum protection for your lens from scratches, dust and shocks.
  • Washable & Reusable: Wash away dust and dirt with clean water, allow to dry. This product can be used over and over.
  • Full Protection: This VR lens cover keeps your lens clean, protects from bright light and sun damage and protects from scratches and shocks. Using this product can prolong the life of your expensive VR headset. Ideal for use when storing your headset.

Full Specifications

BrandDigiCharge
ColorBlack
PlatformPlayStation, PlayStation 5
Model NameFBA-PHVR-135
Resolution2560 x 1440
Screen Size6 inches
Display TypeOLED
Model NumberFBA-PHVR-135
Field Of View110 degrees
Built-In MediaLens Cap, Lens Cap, Protector
Connector TypeOwner
Controller TypeMotion Control
Mfr Part NumberFBA-PHVR-135
Special FeatureDust protection, Impact protection, Washable
Sensor TechnologyProximity, Magnetometer, Gyroscope, Accelerometer
Compatible DevicesPlayStation
Additional FeaturesDust protection, Impact protection, Washable
Included ComponentsLens Cap, Lens Cap, Protector
Washable & ReusableWash away dust and dirt with clean water, allow to dry. This product can be used over and over.
Age Range DescriptionAdult
Full listing titleDigicharge Lens Protective Cover for PS VR2, PS VR 2 Glasses Cap, PSVR2 Protector Dustproof & Anti-Scratch Lens Shield, 14mm Thick Foam, Protects All Headset from Dust including sensor, Not Just Lens

Ready to buy?

Digicharge Lens Protective Cover for PS VR2, PS VR 2 Glasses Cap, PSVR2 Protector Dustproof & Anti-Scratch Lens Shield, 14mm Thick Foam, Protects All Headset from Dust including sensor, Not Just Lens is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related VR Headsets & Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →