VWEICYY Fan Hub
Bottom line: The VWEICYY Fan Hub: 1-to-5 splitter frees four motherboard headers for other components; main trade-off: all five fans share one header, so no per-fan speed curves.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 1-to-5 splitter frees four motherboard headers for other components
- ✓ Works with both 3-pin DC and 4-pin PWM case fans
- ✓ 15-inch lead reaches bottom-mount fans from a top header
- ✓ Tinned copper core keeps voltage drop off fan RPM
- ✓ 2.9mm adhesive backing sticks the hub out of sight
Cons
- ✗ All five fans share one header, so no per-fan speed curves
- ✗ Adhesive pad is single-use, hard to reposition once stuck
- ✗ No SATA power input, so total draw is capped by the header
- ✗ Category listed as RGB lighting but this hub passes no RGB signal
SpecPicks Verdict
SpecPicks scored VWEICYY Fan Hub using a rating × review-volume × price-fit model applied to published specs and reviews across the rgb & lighting category. VWEICYY's rgb & lighting lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for rgb & lighting of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Fan extension cable for PC computer motherboard fan, make you easier to DIY PC computer
- The PC fan controller is a 4-pin female connector that supports both 4-pin and 3-pin fan cables and is compatible with all 4-pin and 3-pin housing fans.
- 15-inch fan power extension cable with tinned copper wire core for use without affecting fan performance
- The pc fan splitters with a 2.9MM thick adhesive backing that fits in the right place in the chassis for a clean and tidy look inside the PC case.
Full Specifications
| Brand | VWEICYY |
|---|---|
| Material | Polyvinyl Chloride |
| Noise Level | 14.4 db |
| Compatibility | PC |
| Cooling Method | Air |
| Number of Items | 1 |
| Number of Packs | 1 |
| Compatible Devices | Cpu, Gaming Console, PC, Personal Computer |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 9200 degrees_per_second |
| Full listing title | VWEICYY Fan Hub,Compatible 3PIN/4PIN PC Fan Splitter.PWM Fans Hub for Desktop PC Cooling Fans,Computer DIY,1 to 5 |
Ready to buy?
VWEICYY Fan Hub,Compatible 3PIN/4PIN PC Fan Splitter.PWM Fans Hub for Desktop PC Cooling Fans,Computer DIY,1 to 5 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- Best 8GB GPU for Local LLMs in 2026
- Best Controller for Raspberry Pi Retro Gaming and Emulation in 2026
- Build a Wall-Mounted Raspberry Pi 4 Arcade Cabinet: 3D-Printed Case, SSD Boot, Real BOM
- Best PC Gaming Peripherals Under $50 in 2026
- How Sega's $5M bet saved Nvidia in 1996 — and shaped every GPU launch since
- Sound Blaster Audigy FX Install Guide for Win98 SE Period-Correct Builds
- DeepSeek V4 on an RTX 3060 12GB: What Actually Fits Locally
- Best Dock and Storage Combo for Handheld PC Gaming: JSAUX Dock + a Fast SSD
- Best Budget Gaming CPU Under $250 in 2026
- LEGO Batman: Legacy of the Dark Knight Runs Well on Steam Deck
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best 27-Inch Gaming Monitor?
- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
- Sega's $5M Bet Saved Nvidia in 1996 — Jensen Heads to Tokyo
- Blue Yeti vs HyperX QuadCast 2: Best Budget Streaming Mic Setup in 2026
- Best SteamOS Handheld Gaming PCs in 2025: What to Buy
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB vs the Alternatives
- Self-Host Immich on a Raspberry Pi 4 8GB: SSD Boot, Power Draw, and Real Performance
- GPT-5.6 Sol matches Fable 5 near one-third the cost
- Building a Period-Correct 1998 Voodoo2 SLI Rig (and Imaging Its Boot Drive)
- Best PlayStation Controllers for PC Gaming in 2026
- Noctua NH-U12S vs Cooler Master ML240L RGB for a Ryzen 7 5800X gaming build: which cooler actually holds…
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090