Skip to main content
Waveshare PCIe to M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, HAT + Standard
waveshare

Waveshare PCIe to M.2 Adapter for Raspberry Pi 5

Bottom line: The Waveshare PCIe to M.2 Adapter for Raspberry Pi 5 ($13.99 on Amazon as of 2026-10-07): Boots Pi 5 directly from NVMe, no microSD needed for the OS; main trade-off: only fits 2230 and 2242 M.2 drives, so no common 2280 sticks.

$13.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $13.99 Compare to similar single-board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Boots Pi 5 directly from NVMe, no microSD needed for the OS
  • ✓ Uses the Pi 5 native 16-pin PCIe FPC header, not a USB bridge
  • ✓ Runs PCIe Gen2 or Gen3, so you can dial back if a drive is unstable
  • ✓ Onboard status indicator shows drive power state at a glance
  • ✓ Costs 13.99 USD, among the cheaper routes to NVMe on a Pi 5

Cons

  • ✗ Only fits 2230 and 2242 M.2 drives, so no common 2280 sticks
  • ✗ NVMe on a Pi 5 needs a config.txt edit before the drive is detected
  • ✗ Adapter draws from the Pi 5 supply, so a weak PSU can drop the drive
  • ✗ Package contents vary by listing variant, per the seller's own note

Manufacturer description

About this item Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing Based On 16PIN PCIe Interface Of Raspberry Pi 5 Compatible With 2230/2242 Size M.2 Solid State Drive Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive Easy To Monitor The Working Status Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation Better Cooling Effect For Pi5 And Solid State Drive * for reference only, please refer to the Package Content for detailed part list › See more product details

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Waveshare PCIe to M.2 Adapter for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. waveshare's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
  • Based On 16PIN PCIe Interface Of Raspberry Pi 5
  • Compatible With 2230/2242 Size M.2 Solid State Drive
  • Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
  • Easy To Monitor The Working Status
  • Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation

Full Specifications

UPC788046388435
ASINB0CSJWNNVV
Brandwaveshare
Model NamePCie To M.2 HAT+
Unit Count1.0 Count
ManufacturerWaveshare
Model NumberPCIe TO M.2 HAT+
Built-In MediaPCIe to M.2 Adapter
Mfr Part NumberPCIe TO M.2 HAT+ -1
Compatible DevicesRaspberry Pi 5
Included ComponentsPCIe to M.2 Adapter
Warranty Description1 year
Wireless CompabilityBluetooth
RAM Memory TechnologyLPDDR4
Connectivity TechnologyPCIe
Smart Home CompatibilityNot Smart Home Compatible
Full listing titleWaveshare PCIe to M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, HAT + Standard

Ready to buy?

Waveshare PCIe to M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, HAT + Standard is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $13.99

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Related Single-Board Computers

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Waveshare PCIe to M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, HAT + Standard
$13.99
View on Amazon →