KEYFANCLUB Small Axial Exhaust Fan
Bottom line: The KEYFANCLUB Small Axial Exhaust Fan ($19.99 on Amazon as of 2026-11-21 11:24 UTC): 80mm dual ball bearing fan rated for 24/7 duty over roughly 6 years; main trade-off: 80x25mm frame moves limited air for large 3D printer enclosures.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 80mm dual ball bearing fan rated for 24/7 duty over roughly 6 years
- ✓ Dial controller varies voltage 3V-12V, spanning 1500 to 4500 rpm
- ✓ Ships complete: US plug adapter, ducting adapter, mesh, 8 screws, manual
- ✓ Metal ducting end mounts to round pipe for grow tents or laser enclosures
Cons
- ✗ 80x25mm frame moves limited air for large 3D printer enclosures
- ✗ No carbon filter included, so fumes are exhausted rather than scrubbed
- ✗ 4500 rpm top speed on an 80mm frame gets audible at full dial
- ✗ Wall-plug adapter is US-only, needing a converter outside North America
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for KEYFANCLUB Small Axial Exhaust Fan, so this read rests on the manufacturer's listed specs and the current price in the retro cpu coolers & fans category (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "80mm dual ball bearing fan rated for 24/7 duty over roughly 6 years"; the main trade-off is "80x25mm frame moves limited air for large 3D printer enclosures". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Smaller Size fan 80mm】standard 80mm Computer fan, running speed is 1500rpm to 4500rpm, generating a constant and continuous flow of air keeping everything cool and temperatures down and if there is a need for more air flow the included dial controller allows you to increase the air flow
- 【Multiple Application】To meet the various applications as need, the kit included one ducting ends to mount in round pipes, such as little grow tent, 3D laser experiment, 3D printing enclosure, soldering station, to help move air for exhaust, heating or cooling, or air filtration
- 【Controllable Speed】The speed is adjusted from 3v-12v by manual controlling of the speed controller. Allows you to vary the voltage or speed of the fans.you can adjust the fan’s speed to optimize the airflow and noise for your application
- 【Dual Ball Bearing】 Which contribute to smooth running and a longer lifespan. Almost it can run 24/7 for over 6 years
- 【Practical Kits & Warrant】1 * DC 12V Axial Fan (80x25mm),1 * 3V to 12V US Plug Power Adapter, 1 * Metal Ducting Adapters, 1 * Metal Meshes, 8 * Fastened Screws , 1 * User Manual. 12-month warranty and friendly customer service by KEYFANCLUB
Full Specifications
| Brand | KEYFANCLUB |
|---|---|
| Model | 8025FANS1MDA |
| Voltage | 120 Volts (AC) |
| Wattage | 3 watts |
| Material | Metal, Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 40 Decibels |
| Part Number | 8025FANS1MDA |
| Material Type | Metal, Plastic |
| Cooling Method | Air |
| Item Type Name | Exhaust Fan |
| Number of Items | 1 |
| Air Flow Capacity | 65 Cubic Feet Per Minute |
| Compatible Devices | Printer |
| Included Components | Ventilation Fans with power adapter |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 4500 RPM |
| Full listing title | Small Axial Exhaust Fan, 80mm 12V DC Fan with AC Plug Dual Ball Bearings Air Exhaust Fume Smoke Extractor Fan Kit for DIY Soldering, 3D Printer Enclosure |
Benchmark data for other processors
Ready to buy?
Small Axial Exhaust Fan, 80mm 12V DC Fan with AC Plug Dual Ball Bearings Air Exhaust Fume Smoke Extractor Fan Kit for DIY Soldering, 3D Printer Enclosure is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Abit BP6 Dual Celeron 366 Build Guide: The Legendary $200 SMP Workstation in 2026
- GPT-5.6 Deleted User Files With Full Disk Access, OpenAI Says It Shouldn't Have
- Logitech G920 vs Thrustmaster: Best Beginner Sim Racing Setup 2026
- Qwen3.6 the Right Way: Run It Through a Pi Coding Agent
- Ollama vs vLLM vs llama.cpp on a 12GB GPU: Which Wins for One User?
- Best GPU for Ryzen 5 5500 in 2026 (Budget to 1440p)
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- PC Sim Racing Wheels in 2026: Logitech G29, Thrustmaster and HORI Compared
- Genesis Mini and SNES Classic on a 4K Gaming Monitor: What Actually Happens to 720p
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- Best Hardware for a Home Game Server in 2026
- Best GPU for AI code generation in 2026
- HyperX QuadCast 2 vs Blue Yeti for Streaming in an Untreated Room
- Building a 2002 LAN Party PC: GeForce 4 Ti + Athlon XP
- Best CPU Cooler for a Ryzen 5800X Under PBO + Manual Overclock in 2026
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Raspberry Pi 4 8GB as a Jellyfin Media Server: Real Limits
- Hugging Face Says an AI Agent Breached Its Infrastructure
- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- Laguna XS.2 Lands in llama.cpp: What the Tiny Hybrid Model Means for Local Inference
- Best Compact DIY NAS Setup in 2026: A Buyer's Guide
- Best Controller for PC and Steam Gaming in 2026: G7 SE vs 8BitDo Pro 2 vs DualSense
- RTX 3060 12GB vs RX 7600 XT for Local LLMs: The Cheap Inference Card to Buy in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090