1 Pcs for Mister Fpga V1.3 Real-Time Clock Board & 1 Pcs for Mister FPGA 3.5mm Headphone Port Replacement Board
Bottom line: The 1 Pcs for Mister Fpga V1.3 Real-Time Clock Board & 1 Pcs for Mister is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Alliance Memory AS4C32M16SB-7TIN Chips
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Used and vintage listings vary by seller and condition — check the listing photos, description and return terms before buying
Manufacturer description
Nuhikap Colour:BlueReal time clock board:This Extra Slim (XS-D) v2.5 board provides 128MB of SDR SDRAMmemory for cores requiring a large ( 512KB) of memory including the core. Although the DE10-Nano has built in DDR3 RAM, it has a high latency and is not suitable for the timings required of retro EDO DRAM. So if a core requires precise memory timings, then the onboard DDR3 cannot be used.Every one of my boards uses the high memory paired. You can be confident knowing each 128MB SDRAM Extra Slim (XS-D) v2.5 board has been tested for over an hour at 140 MHz. I have also tested each with the…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for 1 Pcs for Mister Fpga V1.3 Real-Time Clock Board & 1 Pcs for Mister…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Alliance Memory AS4C32M16SB-7TIN Chips
- 100% Of The ROM Library Playable
- Suitable For Terasic DE10-Nano FPGA Board
- 1 pcs for Mister Fpga V1.3 Real-Time Clock Board & 1 pcs for MiSTer FPGA IO board
- MiSTer IO Board Compatible;Fully Assembled & Tested
Full Specifications
| Brand | Nuhikap |
|---|---|
| Unit Count | 3.26 Ounce |
| Built-In Media | Real time clock board, MiSTer FPGA IO board |
| Mfr Part Number | I710025108 |
| Processor Count | 1 |
| Total Usb Ports | 1 |
| Compatible Devices | Terasic DE10-Nano FPGA Board, MiSTer FPGA IO board |
| Included Components | Real time clock board, MiSTer FPGA IO board |
| RAM Memory Installed | 128 MB |
| RAM Memory Technology | DDR3 |
| Connectivity Technology | USB, VGA |
| Ram Memory Installed Size | 128 MB |
Ready to buy?
1 Pcs for Mister Fpga V1.3 Real-Time Clock Board & 1 Pcs for Mister FPGA 3.5mm Headphone Port Replacement Board is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
The FPGA Programming Handbook: An essential guide to FPGA design for transforming ideas into hardware using…
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- 1440p 165Hz vs 4K 60Hz: ASUS TUF VG27 vs SANSUI 27" for Gaming
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- Best Budget Gaming PC Parts in 2026: A Ryzen + RTX 3060 Build
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- Add NVMe Boot and Active Cooling to a Raspberry Pi 5 in 2026
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- Intel llm-scaler-vllm 1.4: Arc Pro B70 Inference Support Lands
- Best Budget Streaming Setup in 2026: 5 Picks Under Budget
- How Creative Killed Aureal: The 1999 Patent War, Audigy's Lineage, and Why Consumer PC Audio Stagnated for…
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- Best Internal SATA SSDs for PC Upgrades (2026)
- Best CPU Cooler for AM4 Ryzen 5800X & 9700K Builds (2026)
- Home Assistant on a Raspberry Pi 4 8GB: Full 2026 Setup
- Best Gaming PC Build Components for 2026
- Alien: Isolation on Steam Deck: Best Settings for 2025
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- Why Privacy-Preserving AI Demand Is Rising in the LLM Era
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Qwen3 8B: Raspberry Pi 4 8GB vs RTX 3060 12GB (2026)
- AI-Driven Driver Recovery for SB Live! and Audigy on Win98: How an LLM Watches the Installer
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- Jetson Orin Nano Super vs Coral USB: Which One Runs an LLM?
- Ryzen 7 5800X + RTX 3060 12GB: Best 1440p AM4 Build
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090