Skip to main content
Geekworm X1004 PCIe to Dual M.2 HAT NVMe 2280 SSD PCIe Peripheral Board for Raspberry Pi 5 16GB/8GB/4GB/2GB
Geekworm

Geekworm X1004 PCIe to Dual M.2 HAT NVMe 2280 SSD PCIe Peripheral Board for Raspberry Pi 5 16GB/8GB/4GB/2GB

Bottom line: The Geekworm X1004 PCIe to Dual M.2 HAT NVMe 2280 SSD PCIe Peripheral: Holds two M.2 Key-M NVMe SSDs at full 2280 length on one Pi 5 HAT; main trade-off: raspberry Pi 5 only; no support for Pi 4 or earlier boards.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Holds two M.2 Key-M NVMe SSDs at full 2280 length on one Pi 5 HAT
  • ✓ Boots the Pi 5 from NVMe with bootloader 2024-05-17 or newer
  • ✓ Separate DC/DC converter per SSD, 3.3V at up to 3.5A each
  • ✓ Fits every Pi 5 RAM tier: 2GB, 4GB, 8GB and 16GB
  • ✓ Takes 2230 and 2242 drives when paired with a length extender

Cons

  • ✗ Raspberry Pi 5 only; no support for Pi 4 or earlier boards
  • ✗ Short 2230/2242 SSDs need a separate length extender
  • ✗ Older bootloaders must be updated before NVMe boot works
  • ✗ Only P579-V2/V3 or later cases fit; the original P579 does not

Manufacturer description

About this item Compatibility: Pi 5 M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC; Model:X1004 Support Dual M2 NVMe SSD and Boot from NVMe SSD: Support dual M.2 Key-M NVMe SSD 2280 length or 2230/2242 SSD plus SSD length extender; support boot from NVMe SSD with bootloader version 2024-05-17 and later versions What Sets Us Apart: Dual Independent Power. Two high-efficiency DC/DC step-down converters provide a dedicated 3.3V/up to 3.5A to each SSD, which ensures stable performance User Manual and FAQ: Google Geekworm Wiki and search X1004 for manual and FAQ Matching Case…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Geekworm X1004 PCIe to Dual M.2 HAT NVMe 2280 SSD PCIe Peripheral…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the single-board computers category before committing. On the listing's own facts, the case for it is "Holds two M.2 Key-M NVMe SSDs at full 2280 length on one Pi 5 HAT"; the main trade-off is "Raspberry Pi 5 only; no support for Pi 4 or earlier boards". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Compatibility Pi 5 M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB/16GB SBC; ModelX1004
  • Support Dual M2 NVMe SSD and Boot from NVMe SSD Support dual M.2 Key-M NVMe SSD 2280 length or 2230/2242 SSD plus SSD length extender; support boot from NVMe SSD with bootloader version 2024-05-17 and later versions
  • What Sets Us Apart Dual Independent Power. Two high-efficiency DC/DC step-down converters provide a dedicated 3.3V/up to 3.5A to each SSD, which ensures stable performance
  • User Manual and FAQ Google Geekworm Wiki and search X1004 for manual and FAQ
  • Matching Case P579 Only P579-V2/V3 and later versions can support X1004 installation

Full Specifications

ASINB0D3LP9KBH
BrandGeekworm
StyleClassic
Style NameClassic
Item Weight33 Grams
ManufacturerGeekworm
Model NumberTB-2024-19
Built-In Media1 x X1004 PCIe to M2 NVMe Shield with accessories
Compatible DevicesRaspberry Pi 5 2GB/4GB/8GB/16GB
Hardware InterfacePCI
Warranty Description3 months

Ready to buy?

Geekworm X1004 PCIe to Dual M.2 HAT NVMe 2280 SSD PCIe Peripheral Board for Raspberry Pi 5 16GB/8GB/4GB/2GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Single-Board Computers

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →