Clamp Meter POROMETISTO Digital Inrush Clamp Multimeter 6000 Counts 1000A
Bottom line: The Clamp Meter POROMETISTO Digital Inrush Clamp Multimeter 6000 Counts is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by POROMETISTO's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Clamp Meter POROMETISTO Digital Inrush Clamp Multimeter 6000 Counts… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. POROMETISTO's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- True RMS 1000A Clamp Meter:This multimeter can accurately measures 1000A AC/DC Current, 1000V DC/750 V AC Voltage,NCV, VFD,LoZ, frequency, duty, resistance, capacitance, temperature, diode, continuity inrush current, etc.
- Inrush Current Meter:The amp meter can measure the inrush current, which can promptly detect and solve potential problems in the circuit and ensure the safe operation of the equipment. (Note: The measurement time of the inrush current is about 100ms. It is only applicable to AC)
- VFD & LoZ Mode :The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings.The digital clamp meter is a perfect troubleshooting ammeter tool, you can accurately troubleshoot electrical faults in a fraction of the time and get your job done more efficiently.
- NCV Voltage Testing Function: The clamp on amp meter has a non-contact voltage (NCV) detector that can easily and quickly determine if voltage is present ,troubleshooting electrical problems in a safe, user-friendly way.
- Thoughtful Design: The digital electrical tester has functions such as data hold, max/min , auto shut-off, low battery indication, etc. In addition, the clamp meter is equipped with an LCD backlit screen and LED flashlight, allowing you to work in dim or low-light environments, such as electrical cabinets, under buildings, behind appliances, and other enclosed spaces.
- Security & Packages:CAT IV 300 V/CAT III 600 V safety rating provides confidence and peace of mind. Package includes clamp multimeter, test leads, thermocouple, multimeter hard case, batteries and user manual.If you have any questions about operation or pre-sales and after-sales, please feel free to contact us and we will provide you with our best service.If the product has any quality problems, POROMETISTO will provide free replacement service within 1 year.
Full Specifications
| Brand | POROMETISTO |
|---|---|
| Color | orange |
| Model | CM02 |
| Style | industrial style |
| Style Name | industrial style |
| Part Number | CM02 |
| Power Source | Battery Powered |
| Measurement Type | Ammeter, LCR Meter, Multimeter, Ohmmeter, Voltmeter |
| Specification Met | IEC 61010-1:2000-1 |
| Included Components | Clamp Meter,Test Leads (Pair), K-Type Thermocouple, batteries, user manual, case |
| Full listing title | Clamp Meter POROMETISTO Digital Inrush Clamp Multimeter 6000 Counts 1000A | TRMS Amp Voltage Tester with VFD, LOZ Mode, Measures AC/DC Current Voltage NCV Temperature Resistance Capacitance Frequency |
Ready to buy?
Clamp Meter POROMETISTO Digital Inrush Clamp Multimeter 6000 Counts 1000A | TRMS Amp Voltage Tester with VFD, LOZ Mode, Measures AC/DC Current Voltage NCV Temperature Resistance Capacitance Frequency is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc for Stable Diffusion: VRAM, Setup & Benchmarks 2025
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- 1440p 500Hz QD-OLED Monitors: 2025 Round-Up
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Best Cooler for the Ryzen 7 5800X: NH-U12S vs AK620 vs ML240L
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- How to run Llama 3.1 70B on Arc B580
- ComfyUI on an RTX 3060 12GB: VRAM Tuning and Image-Gen Throughput
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- Forza Horizon 6 PC Benchmarks: What GPU Hits 60 FPS at 1440p?
- AI Bug-Hunting Surged: Running a Local Security-Scanner LLM on 12GB VRAM
- How to run Qwen 3 32B on Apple M4 Max
- ZOTAC RTX 3060 12GB vs Intel Arc B580 12GB for 1440p Gaming in 2026
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Can You Run Local TTS on an RTX 3060 12GB in 2026?
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel
- Asus ProArt PA27USD OLED Lands — and What 4K Gamers Can Buy for Less
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- RTX 3060 12GB vs RTX 3090 for Local LLMs (2026)
- Cut AI API Bills: Run Local LLMs on an RTX 3060 12GB (2026)
- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
- Sound Blaster Audigy 2 ZS vs Live! 5.1: WinXP Gaming Audio in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090