GeeekPi P30 PoE+ HAT for Raspberry Pi 5, with Official Pi 5 Active Cooler
Bottom line: The GeeekPi P30 PoE+ HAT for Raspberry Pi 5 is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $27.99 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by GeeekPi's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item Compatibility --- This kit include a PoE+ Hat and Official Pi 5 Active Cooler for Raspberry Pi 5 board. Power Supply --- The PoE+ Hat supports a 5.1V/4.5A output. For full power operation, it requires a switch that supports the 802.3at protocol and can provide at least 30W of power. Heat Dissipation --- The PoE Hat has been designed with efficiency in mind, resulting in lower temperatures compared to other PoE modules. The thermal imaging shows a temperature difference of nearly 30 degrees Celsius under the same load conditions. GPIO Extension --- The kit includes 2x20Pin…
SpecPicks Verdict
SpecPicks scored GeeekPi P30 PoE+ HAT for Raspberry Pi 5 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility --- This kit include a PoE+ Hat and Official Pi 5 Active Cooler for Raspberry Pi 5 board.
- Power Supply --- The PoE+ Hat supports a 5.1V/4.5A output. For full power operation, it requires a switch that supports the 802.3at protocol and can provide at least 30W of power.
- Heat Dissipation --- The PoE Hat has been designed with efficiency in mind, resulting in lower temperatures compared to other PoE modules. The thermal imaging shows a temperature difference of nearly 30 degrees Celsius under the same load conditions.
- GPIO Extension --- The kit includes 2x20Pin PC104 female headers to extend the GPIO pins, allowing for additional peripherals and sensors to be connected to the Raspberry Pi.
- PoE Power Supply --- It also provides 2x2Pin PC104 female headers specifically for powering the PoE+ interface, ensuring a stable power supply for the PoE+ Hat and the Raspberry Pi.
- Adjustable Design --- The PoE+ Hat features an adjustable design that supports different Raspberry Pi models, making it a flexible choice for various projects and setups.
Full Specifications
| ASIN | B0D7927F4X |
|---|---|
| Brand | GeeekPi |
| Model Name | GeeekPi P30 |
| Manufacturer | GeeekPi |
| Model Number | GeeekPi P30 |
| Built-In Media | 1x P30 PoE HAT, 1x Pi 5 Active Cooler |
| Mfr Part Number | KZ-0064 |
| Processor Brand | Broadcom |
| Processor Count | 1 |
| Total Usb Ports | 4 |
| Compatible Devices | Raspberry Pi 3B+, Raspberry Pi 4B, Raspberry Pi 5 |
| Included Components | 1x P30 PoE HAT, 1x Pi 5 Active Cooler |
| Warranty Description | 6 months |
| RAM Memory Technology | LPDDR4 |
| Connectivity Technology | GPIO |
Ready to buy?
GeeekPi P30 PoE+ HAT for Raspberry Pi 5, with Official Pi 5 Active Cooler is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Ring Light vs LED Strips: What Actually Fixes a Grainy Webcam
- Running Qwen3.6 35B A3B at 80 tok/s on a 12GB GPU: The MTP Setup Guide
- Best Mouse Pads for Competitive FPS Gaming in 2026
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Local LLMs on Refurb M4 Max vs New M5 Max: What the LocalLLaMA Numbers Show
- Best IDE & CompactFlash to USB Adapters for Retro PCs 2026
- Local LLM vs Claude in 2026: When On-Device Beats the API
- Steam Deck LCD 6TB Man-Cave Setup: Storage & One-Cable Dock
- Period-Correct 1999 Voodoo3 + Pentium III LAN Party Build Guide
- ComfyUI on a 12GB RTX 3060: SDXL and Flux Image Gen Benchmarked
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- GPT-5.6 Sol Now Requires US Government Approval Per Customer
- Build a Raspberry Pi Carputer for Your Daily Driver (2026)
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Best GPU for Local LLMs in 2026: Why the RTX 3060 12GB Still Wins on Value
- Voodoo 5 6000 Benchmarks: Quake III at Five Resolutions
- Best Plug-and-Play Retro Game Console in 2026
- Qwen3 8B: Raspberry Pi 4 8GB vs RTX 3060 12GB (2026)
- Best Wireless Controller for PC Gaming on Couch and Living Room (2026)
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Prime Day 2026: Logitech Gaming Mice Drop Up to 47% Off
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090