Skip to main content
Arducam for Raspberry Pi Camera Module 3, 12MP IMX708 75°(D) Autofocus Pi Camera V3 with Acrylic Case, 15-22pin FFC Cable
Arducam

Arducam for Raspberry Pi Camera Module 3

Bottom line: The Arducam for Raspberry Pi Camera Module 3 is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category, priced around $45.99 on Amazon as of 2026-10-07. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

$45.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $45.99 Compare to similar single-board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Backed by Arducam's warranty and support channels

Cons

  • ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

About this item Arducam for Raspberry Pi camera v3 is the official camera module, it is compatible with Raspberry Pi all boards, 5/4B/3B, Pi Zero W/2 W. Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images. The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images. Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration. Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero series; also comes with an acrylic…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Arducam for Raspberry Pi Camera Module 3 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Arducam's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Arducam for Raspberry Pi camera v3 is the official camera module, it is compatible with Raspberry Pi all boards, 5/4B/3B, Pi Zero W/2 W.
  • Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images.
  • The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images.
  • Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration.
  • Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero series; also comes with an acrylic camera case, easily mount on any tripod with 1/4"-20 mounting screws.

Full Specifications

ASINB0BX6N6V98
BrandArducam
CPU ModelMediaTek MT8125
Model NameArducam for Raspberry Pi Camera Module 3
ManufacturerArducam
Model NumberMediaTek MT8125
Built-In Mediacamera module, 150mm 15pin-22pin FPC Cable, ABS Camera Case
Mfr Part NumberB0306
Processor BrandBroadcom
Processor Count4
Total Usb Ports4
Compatible DevicesRaspberry Pi all boards, 5/4B/3B, Pi Zero W/2 W
Included Componentscamera module, 150mm 15pin-22pin FPC Cable, ABS Camera Case
Warranty Description6 Months
Wireless CompabilityInfrared
RAM Memory TechnologyLPDDR4
Connectivity TechnologyInfrared
Item Dimensions L x W x H0.98"L x 0.94"W x 0.45"H
Full listing titleArducam for Raspberry Pi Camera Module 3, 12MP IMX708 75°(D) Autofocus Pi Camera V3 with Acrylic Case, 15-22pin FFC Cable

Ready to buy?

Arducam for Raspberry Pi Camera Module 3, 12MP IMX708 75°(D) Autofocus Pi Camera V3 with Acrylic Case, 15-22pin FFC Cable is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $45.99

*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.

Related Single-Board Computers

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Arducam for Raspberry Pi Camera Module 3, 12MP IMX708 75°(D) Autofocus Pi Camera V3 with Acrylic Case, 15-22pin FFC Cable
$45.99
View on Amazon →