Skip to main content
Microphone Stand Mic Boom Arm for Blue Yeti HyperX QuadCast SoloCast Yeti Nano Snowball SM7B Q2U Fifine K669B and Other Mics, Overhead Mic Stand Desk Boom Arm with 5/8" 1/4" Adapter
Lemxadd

Lemxadd Microphone Stand Mic Boom Arm

Status: Microphone Stand Mic Boom Arm for Blue Yeti…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The Lemxadd Microphone Stand Mic Boom Arm: 7.1-inch riser lifts the arm for wider up-and-down travel; main trade-off: clamp-only mount; no grommet or bolt-through option listed.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 2 in-stock alternatives:

Similar: NEEWER BASICS Microphone Boom Arm — $22.41 on Amazon as of 2026-11-20 13:45 UTC (price may vary).

Similar: Aokeo Mic Stand — $39.99 on Amazon as of 2026-11-20 11:16 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 7.1-inch riser lifts the arm for wider up-and-down travel
  • ✓ Steel build with a thickened, enlarged desk clamp
  • ✓ Includes 3/8"-to-5/8" and 3/8"-to-1/4" thread adapters
  • ✓ 360-degree adjustment with a spring-loaded scissor arm
  • ✓ Folds for carrying; kit adds 2 mic clips and 5 cable ties

Cons

  • ✗ Clamp-only mount; no grommet or bolt-through option listed
  • ✗ Desk clamp maxes out at 2.2-inch tabletop thickness
  • ✗ No weight capacity stated; check heavy mics against the listing
  • ✗ No shock mount included, only rigid mic clips and adapters

Manufacturer description

The Lemxadd mic boom arm gives your desk setup more room to move. A heightened riser lifts the arm 7.1 inches off the desktop, so you get a larger range of up-and-down travel when you position the mic for streaming, podcasting or voice chat. The arm is built from steel. Its thickened, enlarged clamp uses two adjustable positioning screws and fits desktops up to 2.2 inches thick. The suspension scissor arm adjusts 360 degrees. Loosen the knob, set your angle and tighten it again, while strong springs hold the mic in place and help cut down on noise and vibration. It works with most…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for Lemxadd Microphone Stand Mic Boom Arm, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the streaming gear category before committing. On the listing's own facts, the case for it is "7.1-inch riser lifts the arm for wider up-and-down travel"; the main trade-off is "Clamp-only mount; no grommet or bolt-through option listed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this boom arm work with a Blue Yeti or Shure SM7B?

Yes. Lemxadd lists the SM7B, MV7, Blue Yeti, Yeti Nano, Blue Snowball, Q2U and Fifine K669B as compatible, along with most other condenser and dynamic mics.

How thick a desk can the clamp attach to?

The clamp uses two adjustable positioning screws and fits desktops up to 2.2 inches thick. Measure your tabletop edge before you buy.

What thread adapters come in the box?

You get two metal screws, a 3/8"-to-5/8" and a 3/8"-to-1/4", plus a mic clip adapter. These cover the most common microphone mount threads.

What is included in the kit?

One table clamp base, one support rod, one folding arm, two mic holders/clips, two metal adapter screws, five cable ties and a product manual.

How high does the arm sit above the desk?

A riser lifts the arm 7.1 inches above the desktop, which gives it more vertical travel. The scissor arm then adjusts 360 degrees, and you lock the angle with a knob.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【Heightened Design】The microphone stand is an heightened mic stand design, rising 7.1 inches from desktop. This design can achieve more space mobility, the up and down movement area is larger, allowing you to optimize settings for excellent audio quality.
  • 【Upgrade Desk Stand】Compared to the old versions, this desk mic stand is made of high-quality steel, and has been thickened and enlarged clamp which can be more securely fixed to the desktop. Two adjustable positioning screws can be easily clamped onto any desktop with a thickness of 2.2 inches.
  • 【Applicability】This mic boom arm set includes 3/8"to 5/8" screw, 3/8" to 1/4" screw, and mic clip adapter to suit most microphones. The mic stand can work perfectly for SM7B, MV7, Blue Yeti, Blue Yeti Nano, Blue Snowball, Q2U, K669B and most other condenser or dynamic microphones.
  • 【Professional Mic Stand】The suspension boom scissor arm mic stand is 360° adjustable in all directions. You can adjust the mic to the suitable angle or height to show your voice. Before installing your microphone to the mic arm, you can loosen the knob and adjust it to the angle you want to tighten. And sturdy boom arm with extra strong springs provide extra support effectively reduce noises and vibration.
  • 【Complete Microphone Stand Kit】Package includes everything needed for studio recording or broadcasting, 1 x table clamp base, 1 x support rod, 1 x folding arm, 2 x mic holders/clips, 2 x metal screws(3/8"to 5/8" and 3/8" to 1/4"), 5 x cable ties, and 1 x Product Manual. The microphone arm can be folded for easy carrying and storage.

Full Specifications

BrandLemxadd
ColorBlack
StyleMic stand boom arm
MaterialAlloy Steel
Base TypeClamp
Model NameMICST901
Finish TypeLacquered
Model NumberMICST901
Material TypeAlloy Steel
Product StyleMic stand boom arm
Maximum Height29 centimeters
Number of Items1
Vibration/RumbleYes
Body Material TypeAlloy Steel
Included ComponentsTable Clamp Base, Support Rod, Folding Arm, 2 x Mic Holders/Clips, 2 x Metal Screws (3/8" to 5/8" and 3/8" to 1/4"), 5 x Cable Ties, Product Manual
Manufacturer Part NumberMICST901
Microphone Stand Thread Size3/8 inch, 5/8 Inch
Full listing titleMicrophone Stand Mic Boom Arm for Blue Yeti HyperX QuadCast SoloCast Yeti Nano Snowball SM7B Q2U Fifine K669B and Other Mics, Overhead Mic Stand Desk Boom Arm with 5/8" 1/4" Adapter

Ready to buy?

Amazon shows no buyable offer for Microphone Stand Mic Boom Arm for Blue Yeti… at the last check. A similar in-stock product is NEEWER BASICS Microphone Boom Arm. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $22.41

Related Streaming Gear

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
NEEWER BASICS Microphone Boom Arm
Similar, in stock — $22.41 →