Apevia ITX-AP300W 300W Flex ATX Power Supply
Bottom line: The Apevia ITX-AP300W 300W Flex ATX Power Supply ($35.99 on Amazon as of 2026-11-20 11:15 UTC): Flex ATX body at 5.9 x 3.21 x 1.59 in fits Mini-ITX, SFF and 1U cases; main trade-off: 300W ceiling leaves little headroom for power-hungry graphics cards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Flex ATX body at 5.9 x 3.21 x 1.59 in fits Mini-ITX, SFF and 1U cases
- ✓ Separable 20+4 main and 4+4 CPU plugs suit both modern and legacy motherboards
- ✓ 2x SATA and 2x Molex leads cover SSDs, hard drives and system fans
- ✓ OVP, OCP and short-circuit protection built into the unit
- ✓ 40mm double ball-bearing fan with thermal speed control
Cons
- ✗ 300W ceiling leaves little headroom for power-hungry graphics cards
- ✗ Only 2 SATA and 2 Molex leads limit how many drives and fans you can run
- ✗ No PCIe graphics power connector in the listed cable set
- ✗ Manual 115V/230V switch is preset to 115V and must be flipped by hand abroad
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Apevia ITX-AP300W 300W Flex ATX Power Supply, so this read rests on the manufacturer's listed specs and the current price in the power supplies & cables category (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Flex ATX body at 5.9 x 3.21 x 1.59 in fits Mini-ITX, SFF and 1U cases"; the main trade-off is "300W ceiling leaves little headroom for power-hungry graphics cards". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Standard SFF Compatibility: Designed for standard Mini-ITX, Flex-ATX, and 1U cases. Perfect for retail motherboards, HTPCs, POS systems, and compact servers. Dimensions: 5.9" x 3.21" x 1.59"
- Versatile Connectivity: Includes 1x 20/24-pin Main and 1x 8-pin (4+4) CPU connectors. Both are separable (20+4 and 4+4) to support both modern and legacy motherboards
- Essential Power Ports: Equipped with 2x SATA and 2x Molex connectors to power your internal SSDs, hard drives, and system fans
- 300W Reliable Output: Delivers stable power for compact builds. Note: Unit requires full connection to the motherboard to power on; it will not spin when connected only to a wall outlet
- Quiet Cooling & Safety: Features a 40mm double ball-bearing fan with thermal speed control and a full industrial safety suite (OVP, OCP, SCP) for total system protection
- Universal Mini-ITX & Flex-ATX Fit: Specifically engineered for Small Form Factor (SFF) cases, 1U servers, and HTPC builds. This 300W unit fits standard ITX/Flex-ATX chassis (Dimensions: 5.9" x 3.21" x 1.59"). IMPORTANT: The 24-pin and 8-pin CPU connectors are separable (20+4 and 4+4) to support both modern and legacy motherboards by simply sliding the connectors apart
Full Specifications
| Brand | Apevia |
|---|---|
| Wattage | 300 watts |
| Model Name | ITX-AP300W |
| Unit Count | 1.0 Count |
| Form Factor | Mini-ITX / Flex ATX |
| Model Number | ITX-AP300W |
| Compatibility | PC, Switch |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 300 |
| Item Dimensions | 5.91 x 1.59 x 3.21 inches |
| Mfr Part Number | PS-ITX300W |
| Compatible Devices | 1 |
| Power Supply Design | Non-Modular |
| Warranty Description | 1 Year Replacement Warranty |
| Essential Power Ports | Equipped with 2x SATA and 2x Molex connectors to power your internal SSDs, hard drives, and system fans |
| Maximum Input Voltage | 120 Volts (AC) |
| Minimum Input Voltage | 110 Volts (AC) |
| Quiet Cooling & Safety | Features a 40mm double ball-bearing fan with thermal speed control and a full industrial safety suite (OVP, OCP, SCP) for total system protection |
| Full listing title | Apevia ITX-AP300W 300W Flex ATX Power Supply, Standard Mini-ITX/SFF / 1U Desktop Replacement, 115V/230V Manual Switch |
Ready to buy?
Apevia ITX-AP300W 300W Flex ATX Power Supply, Standard Mini-ITX/SFF / 1U Desktop Replacement, 115V/230V Manual Switch is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ComfyUI on a 12GB GPU: SDXL and Flux Setup, VRAM Limits, and Real Throughput
- Best Budget PC Upgrades Under $250 in 2026
- DualSense vs GameSir G7 SE for PC Sim Racing: Which Controller Wins in 2026
- Ryzen AI Max+ 395 128GB vs Dual RTX 3060 for Local LLMs
- Building a 2002 Windows XP Gaming Rig: GeForce 4 Ti, Sound BlasterX G6, CompactFlash Boot
- Best Budget AMD Gaming PC Upgrades in 2026: 5 Parts That Move the Needle
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- AI-Driven Driver Install on Windows 98: TNT2, Voodoo3, and SoundBlaster Live! Walked by Claude
- Best Wireless Gaming Controllers for PC and Console in 2026
- AI-Driven Win9x Driver Install: How Vision-LLMs Tame Vintage Installers (2026)
- Best Nintendo Switch Accessories for Handheld and Docked Play in 2026
- Single vs. Dual Channel Memory: Intel Core Ultra 7 270K
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- Grok Imagine 1.5 Shipped 720p Video — Run Local Image/Video Gen Instead
- DeepSeek V4 on an RTX 3060 12GB: What Actually Fits Locally
- Handheld Gaming PCs Ranked: 2025's Top Picks Compared
- Sound Blaster Audigy 2 ZS Won't Install on Windows XP: Driver Hunt + Fix
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Qwen3.6 35B-A3B on a 12GB GPU: 95 tok/s on 4070 Super, 34 on 3060
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- Best Budget SSD for a Gaming PC in 2026: SATA vs NVMe
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090