Intec Gaming Mod Kit for Original N64 Controller
Bottom line: The Intec Gaming Mod Kit for Original N64 Controller ($24.99 on Amazon as of 2026-11-20 11:31 UTC): No soldering needed - one screwdriver installs the kit into your wired N64 pad; main trade-off: controller not included - you must already own a wired original N64 pad.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ No soldering needed - one screwdriver installs the kit into your wired N64 pad
- ✓ 900mAh rechargeable cell rated for 15 hours of continuous play
- ✓ USB-C charging port instead of proprietary or AA-cell power
- ✓ Keeps N64 rumble at the same vibration level as the stock Rumble Pak
- ✓ Hall effect joystick support fixes the worn-stick drift original N64 pads develop
Cons
- ✗ Controller not included - you must already own a wired original N64 pad
- ✗ Opening the shell to install voids any remaining warranty on your controller
- ✗ Switch-only compatibility; no PC, Steam Deck, or other console modes listed
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Intec Gaming Mod Kit for Original N64 Controller, so this read rests on the manufacturer's listed specs and the current price in the controllers & gamepads category (how we evaluate). Compare with similarly-priced alternatives in the controllers & gamepads category before committing. On the listing's own facts, the case for it is "No soldering needed - one screwdriver installs the kit into your wired N64 pad"; the main trade-off is "Controller not included - you must already own a wired original N64 pad". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Support N64 controller, provide the same vibration level as usual
- Designed to be as easy as possible to install with only one screwdriver but without soldering
- Favorite original retro game controllers. Easily modify your original wired N64 controller into a controller bringing compatibility with Switch.
- Built-in USB-C charging port and 900AH rechargeable lithium battery, which can be used continuously for 15 hours, ensuring long-term battery life.
- Support multiple people playing on the same screen, realizing two-player confrontation and enjoying the fun of the game.
Full Specifications
| Brand | Intec Gaming |
|---|---|
| Color | Grey |
| Model Name | RM |
| Connectivity | USB-C |
| Model Number | G3645 |
| Power Source | Battery Powered |
| Compatibility | Switch, N64 |
| Button Quantity | 10 |
| Connection Type | Wired |
| Controller Type | Joystick |
| Vibration/Rumble | Yes |
| Hardware Platform | Nintendo 64 |
| Compatible Devices | Nintendo Switch |
| Connectivity Technology | USB |
| Compatible Video Game Console Models | Nintendo 64, Nintendo Switch |
| Full listing title | Mod Kit for Original N64 Controller – Make N64 Controller Compatible with Nintendo Switch – Easy Installation, Long Battery Life, Multiplayer Support,Rumble Pack – Supporting Hall Joystick |
Ready to buy?
Mod Kit for Original N64 Controller – Make N64 Controller Compatible with Nintendo Switch – Easy Installation, Long Battery Life, Multiplayer Support,Rumble Pack – Supporting Hall Joystick is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Automated Cabinet Lighting With a Raspberry Pi: Build Guide
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- VibeThinker-3B: A 3B Reasoning Model on RTX 3060 and Raspberry Pi 4
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- Intel Arc Pro B60 AI: 24GB VRAM for Local LLMs in 2026
- Intel Arc B50 for Stable Diffusion: Setup & Performance
- Use a Raspberry Pi 4 as a Second Monitor or KVM in 2026
- CRT PC Monitors for Retro Gaming: 2026 Buying Guide
- GLM-5.2 on 12GB VRAM: Quantization and Speed on the RTX 3060
- DeepSWE vs SWE-Bench Pro: The Coding-Agent Benchmark Shakeup
- Matrox G400 MAX in 2026: Period-Correct Install, EMBM Showcase, and Pentium III Benchmarks
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- Best CPU for Gaming 2026: Price-to-Performance Guide
- Best Budget Gaming Mouse Pad for Esports in 2026
- Period-Correct LAN Party Build: 2002 Pentium 4 + GeForce 4 Ti + Sound Blaster Live
- Best Budget 4K Monitor in 2026: SANSUI vs KOORUI vs ASUS TUF
- pxpipe: Hide Text in PNGs to Cut Claude Code Token Costs up to 70%
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- Best Retro PC Upgrade Kit 2026: Sound & Storage
- RTX 5090 vs RTX Spark for Local LLMs: 32 GB GDDR7 vs 128 GB Unified (2026)
- gpt-oss 20B on Intel Arc A770 16GB vs RTX 3060 12GB: Quant Table (2026)
- RTX 3060 12GB vs GTX 1050 Ti: What a 4GB Card Runs in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090