Binardat 5G PCIe Network Adapter
Bottom line: The Binardat 5G PCIe Network Adapter ($25.66 on Amazon as of 2026-11-20 09:16 UTC): Realtek RTL8126 chip hits 5Gbps over ordinary Cat5e at up to 100m; main trade-off: linux support stops at kernel 6.4; newer kernels may need a manual Realtek driver.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Realtek RTL8126 chip hits 5Gbps over ordinary Cat5e at up to 100m
- ✓ Auto-negotiates 5G/2.5G/1G/100M/10M, so it drops back to older switches
- ✓ Fits PCIe x1, x4, x8 and x16 slots; both full-height and low-profile brackets included
- ✓ PXE boot, Wake-on-LAN and 802.1Q VLAN tagging for NAS and server builds
- ✓ 16KB jumbo frames plus Auto MDIX and 802.3x full-duplex flow control
Cons
- ✗ Linux support stops at kernel 6.4; newer kernels may need a manual Realtek driver
- ✗ Realtek NICs lean on CPU more than Intel server NICs under sustained load
- ✗ No PCI slot support, so it is useless in genuinely vintage pre-PCIe systems
- ✗ Driver arrives on CD-ROM or via a bracket-printed link, awkward on optical-free builds
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Binardat 5G PCIe Network Adapter, so this read rests on the manufacturer's listed specs and the current price in the retro networking cards category (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Realtek RTL8126 chip hits 5Gbps over ordinary Cat5e at up to 100m"; the main trade-off is "Linux support stops at kernel 6.4; newer kernels may need a manual Realtek driver". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【5Gbps Network】 Up to 5 Gigabit with Realtek RTL8126 chip, compatibe 5G/2.5G/1Gbps/100M/10M auto-negotiation, support standard Cat5e or above UTP at distances up to 100m (328 feet)
- 【PCIe Slot】Compatible for PCIe slot X1,X4,X8,X16, default with standard bracket, also include low profilce bracket, support multiple installation such as PC, server, workstation, NAS, etc. not for PCI slot
- 【Multiple OS】Support Windows11/10, Linux kernel up to 6.4, freely driver download, CD-ROM, Driver link on the bracket, Realtek official website can download the driver easily.
- 【Network Feature】Support PXE, Auto MDIX, IEEE 802.1Q VLAN tagging, IEEE802.3bz(2.5G/5G BASE-T), Full Duplex flow control(IEEE 802.3x), Wake-on-LAN, Jumbo frame 16Kbytes
- 【Easy to Use】Select the appropriate brackets according to the chassis size, insert into the PCIe slots, install the driver, connect to the network, the LEDs show the link status and rate. Any questions, please contact our support email, we will provide timely service.
Full Specifications
| Brand | Binardat |
|---|---|
| Weight | 5g |
| Unit Count | 1 Count |
| Model Number | NA5G1 |
| Compatibility | PC, Linux |
| Built-In Media | 5G Card, Bracket, Cd-rom, Manual |
| Mfr Part Number | NA5G1 |
| Number of Items | 1 |
| Compatible Devices | PC, Server, Workstation, NAS |
| Data Link Protocol | Ethernet |
| Data Transfer Rate | 5000 megabits_per_second |
| Hardware Interface | Ethernet |
| Full listing title | 5G PCIe Network Adapter, RTL8126 5G/2.5G/1G/100Mbps Binardat Ethernet Card RJ45 LAN Controller with Low Profile, Support PXE for Windows 11/10, Linux |
Ready to buy?
5G PCIe Network Adapter, RTL8126 5G/2.5G/1G/100Mbps Binardat Ethernet Card RJ45 LAN Controller with Low Profile, Support PXE for Windows 11/10, Linux is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 vs Arc B580 for 1440p Gaming: Which 12GB Card Wins?
- GPT-5.6 Sol at One-Third the Cost: When Local Inference Still Wins
- gpt-oss 20B on Intel Arc A770 16GB vs RTX 3060 12GB: Quant Table (2026)
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
- Best Webcam for Twitch Streaming Under $100 in 2026
- Sound Blaster AWE32 vs AWE64: Which Belongs in Your DOS Build?
- AMD Revives Zen 2: Ryzen 7 4700LE in $800 RTX 3050 Prebuilts
- ComfyUI for NVIDIA Cosmos 3 on an RTX 3060 12GB: Setup + Limits
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- Tesla Caps AI Spend at $200/Week — The Local RTX 3060 Rig Case
- Build a 2001 GeForce 3 Windows 98 Gaming PC in 2026: Parts and Setup
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Sega Saved Nvidia in 1996: The NV1 Gamble That Shaped Every GPU
- Building a MAME Fighting Setup: Fight Stick + CF Storage for an Arcade Corner
- Best SSD Upgrade for PS4 Pro & PS4 Slim in 2026
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- ComfyUI on an RTX 3060 12GB: Stable Diffusion & Flux Throughput in 2026
- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Best Gaming Mice for Competitive FPS in 2026
- That Game Boy Clone Runs Too Fast — and the Fix Is a Clock Crystal
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 240mm AIO
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090