GINTOOYUN
GINTOOYUN NGFF M.2 M-Key NVME Extension 40 CM PCIe 3.0/4.0 M.2 NVME/NGFF SSD Ribbon Flex Cable for Mainboard SSD 2230/2242/2260/2280 (Straight Out)
Bottom line: The GINTOOYUN NGFF M.2 M-Key NVME Extension 40 CM PCIe 3.0/4.0 M.2 is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Extend NVME from 2230/2242/2260/2280 socket to 2230/2240/2260/2280/cable
- ✓ Backed by GINTOOYUN's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored GINTOOYUN NGFF M.2 M-Key NVME Extension 40 CM PCIe 3.0/4.0 M.2… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. GINTOOYUN's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Attention: Please confirm whether your motherboard supports SATA protocol before purchasing, otherwise it will be invalid and cannot be used
- Extend NVME from 2230/2242/2260/2280 socket to 2230/2240/2260/2280/cable
- Only supports NVME to NVME or SATA to SATA expansion, it cannot convert NVME to SATA, nor can it convert SATA to NVME
- Supports NVM Express (NVMe) 1.4 Data transfer rate up to 64Gbps,,Supports NGFF SATA Data transfer rate up to 6Gbps.
- Built in flexible PVC design, lightweight and compact cable, using four layer circuit board, gold plating process, stable signal transmission, PHDK unique design, PCle high-speed data signal increase technology
Full Specifications
| Brand | GINTOOYUN |
|---|---|
| Attention | Please confirm whether your motherboard supports SATA protocol before purchasing, otherwise it will be invalid and cannot be used |
| Cable Type | AUX |
| Connector Type | Auxiliary |
| Special Feature | NO |
| Compatible Devices | Computer |
Ready to buy?
GINTOOYUN NGFF M.2 M-Key NVME Extension 40 CM PCIe 3.0/4.0 M.2 NVME/NGFF SSD Ribbon Flex Cable for Mainboard SSD 2230/2242/2260/2280 (Straight Out) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- Best Webcam for Twitch Streaming Under $100 in 2026
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
- Build a Period-Correct Windows XP Gaming PC in 2026: The CompactFlash Boot-Drive Trick
- Local LLM as a Quake 3 / UT99 Demo Coach: Ollama on Ryzen 7 5800X + RTX 3060 (2026)
- Best Performance-per-Dollar Hardware Rankings 2026
- Inkling's 975B Open-Weight Speech Model — and the 12GB Rig That Transcribes Free
- Best Mac for running local LLMs in 2026
- Why Nvidia Killed 3dfx — and How Voodoo Still Shapes Every GPU Launch
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- Best Raspberry Pi 5 Starter Kits and Accessories for Home Lab Builds (2026)
- Best Cooler for a Ryzen 7 5800X: ML240L RGB V2 vs Kraken M22
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Best Internal SSD for a PS4 Pro Upgrade: 2.5" SATA Picks That Cut Load Times
- Ryzen 5 5600G vs Ryzen 7 5700X for a No-GPU Home Server
- RTX 5080 vs RX 9070 XT
- Best SSD for Steam Deck and Handheld PCs in 2026
- Gemma 4 Tool-Calling Fix: Re-test Function Calls Locally
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- llama.cpp Vulkan on the RTX 3060 12GB: Setup and Measured tok/s for 2026
- No GPU Required? Testing Local LLM Inference on the Ryzen 5 5600G iGPU
- Best PC Game Controllers for 2026: 5 Picks Ranked
- DIY Handheld Tricorder Build Guide 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090