LINKUP PCIE 5.0 Riser Cable
Bottom line: The LINKUP PCIE 5.0 Riser Cable: Full PCIe 5.0 x16 bandwidth (128GB/s) with multilayer EMI shielding; main trade-off: short 18cm span (20.2cm total) limits big-tower routing.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full PCIe 5.0 x16 bandwidth (128GB/s) with multilayer EMI shielding
- ✓ Backward compatible with PCIe 4.0 and Gen 3 slots
- ✓ Validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards
- ✓ Double reverse connector fits ITX sandwich and SFF layouts
Cons
- ✗ Short 18cm span (20.2cm total) limits big-tower routing
- ✗ Vertical mount usually needs a separate bracket, not included
- ✗ Double reverse orientation only; wrong angle means a return
- ✗ Vertical placement can starve air-cooled cards near a side panel
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for LINKUP PCIE 5.0 Riser Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the expansion cards category before committing. On the listing's own facts, the case for it is "Full PCIe 5.0 x16 bandwidth (128GB/s) with multilayer EMI shielding"; the main trade-off is "Short 18cm span (20.2cm total) limits big-tower routing". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Verified Compatibility — Built for vertical GPU mount and standard layouts across towers, SFF/ITX sandwich cases, open benches, and water-cooled rigs. Fully backward-compatible with PCIe 4.0 and validated on ASUS WS WRX80SE WiFi II and WRX90E Gen5 boards. Ready for next-gen cards like RTX 5090 and RX 9070. Use this PCIe 5.0 riser cable to place the GPU exactly where airflow and aesthetics demand—without giving up stability.
- Gen5 x16 Performance & Shielding — Delivers full 128GB/s on PCIe 5.0 x16 with tuned impedance, premium conductors, and multilayer shielding to suppress crosstalk and EMI. The AVA design targets clean eye margins under load and tight bends, making it a dependable PCIe Gen5 riser cable for high-FPS gaming, AI, and storage workflows. Replace Gen 3 and Gen 4 PCIe cables while preserving upgrade headroom for future GPUs.
- Showcase Aesthetics, Improve Cooling — Move the card where it breathes. A vertical mount GPU clears intake for thick shrouds & radiators, reducing heat soak & noise while giving builds a clean, gallery-style look. Route like a tidy GPU extension cable & keep clocks steady thanks to robust shielding & low-loss geometry. Builders report good quality & that it simply works great when paired with the right bracket and case layout. View Product Description to ensure Compatibility with your PC case.
- Installation Instructions — Measure with a string from the motherboard slot to the GPU PCB to pick the correct span. Seat connectors fully until latched; Fold & Flex in any way. Use standoffs and support brackets if the chassis requires it. If fit seems tight, contact us before forcing parts—we’ll advise the best path for your case model. Clear guidance turns this into a straightforward PCIe cable install, even in cramped ITX routes.
- Choose the right Cable — Choose a length between 2–35.4 inches (see Installation Instruction) and the connector you need: right angle, straight, left angle, double reverse, single reverse right, single reverse left, or single reverse straight. One family covers ITX sandwiches, server trays, and vertical displays. Consistent Gen5 signal integrity across sizes makes it a flexible PCIe extender or GPU riser cable for clean cable management today with room to evolve tomorrow.
Full Specifications
| Brand | LINKUP |
|---|---|
| Color | Black |
| Model | AVA5 |
| Frequency | 128 GHz |
| Cable Type | Riser Cable |
| Unit Count | 1 Count |
| Item Length | 18 centimeters |
| Part Number | AG-P5-33VV-018BK-v3 |
| Connectivity | WiFi |
| Compatibility | PC |
| Connector Type | Pcie-cem |
| Number of Pins | 18 |
| Number of Items | 1 |
| Special Feature | Data Transfer, High Speed |
| Connector Gender | Male-to-Female |
| Specification Met | RoHS |
| Compatible Devices | Gen4 Vertical Mount), LOUQE GHOST S1 MkII, NCASE FormD T1 (3-slot GPU, Nouvolo Nouvolo, THOR ZONE MJOLNIR |
| Data Transfer Rate | 128 gigabytes_per_second |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | No Compatible Phone Models |
| Full listing title | LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 18cm (Total Length: 20.2cm) |
Ready to buy?
LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 18cm (Total Length: 20.2cm) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
- Anthropic's 2GW AMD Deal: What It Means for Local-vs-Cloud Builders
- Microsoft Mirage and Persistent-Memory Video Gen: How Much VRAM You Actually Need
- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5070
- Cut AI API Bills: Run Local LLMs on an RTX 3060 12GB (2026)
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- AVX-512 Lifts Linux RAID Up to 41% on AMD Ryzen Chips
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- PebbleOS Comes to the Raspberry Pi RP2350: What the Port Means for Tinkerers
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- Best Budget GPU for Local LLMs in 2026: The 12GB RTX 3060 Case
- HiDream-O1-Image on an RTX 3060 12GB: Does It Fit?
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- AMD Ryzen 9 9950X3D2 Runs Faster on Linux Than Windows 11
- Raspberry Pi OS Moves to the Linux 6.18 LTS Kernel With an Updated LabWC Compositor
- Retro Game Emulators for iPhone: What Works in 2026
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- Best CPU for Streaming and Gaming on a Single PC in 2026
- Is the RTX 3060 12GB Still Worth It for 1080p Gaming in 2026?
- Microsoft MAI-Image-2.5 Lands #2 on the Image Arena — The Local Angle
- Running GLM-5.2 Locally on an RTX 3060: Ollama VRAM + tok/s
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090