Slice Engineering
Slice Engineering Thin Film Thermal Grease for 3D Printer
Bottom line: The Slice Engineering Thin Film Thermal Grease for 3D Printer is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category, priced around $24.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by Slice Engineering's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Slice Engineering Thin Film Thermal Grease for 3D Printer using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Slice Engineering's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ✔️ DESIGNED FOR 3D PRINTING – Purpose-built high temperature grease for modern 3D printers and high-heat electronics. This non-silicone formula is optimized for PTC heaters, hotends, heater blocks, and sensors, giving you a clean, reliable 3d printer grease that won’t creep, crust, or make a mess.
- ✔️ RATED TO 360 °C FOR CONSISTENT TEMPS – Engineered to stay stable at extreme temperatures, this compound maintains excellent thermal contact up to 360 °C. Ideal for ceramic heaters, MOSFETs, power transistors, CPUs, and other components that need dependable heat transfer during long prints.
- ✔️ ULTRA-THIN SELF-SPREADING FILM – Low-viscosity grease flows into microscopic surface gaps and levels itself into a smooth, even layer. That means lower thermal resistance and more consistent nozzle temperatures than thick, chalky 3d printer thermal paste or generic heat sink compounds.
- ✔️ NON-CONDUCTIVE & NON-SILICONE FORMULA – Electrically insulating chemistry helps prevent shorts around heater cartridges, thermistors, and PCBs, while the silicone-free formulation avoids out-gassing, residue buildup, and dry-out inside your printer enclosure or electronics bay.
- ✔️ EASY, CONTROLLED APPLICATION KIT – Each 0.5 cc syringe includes three 18 ga needles, three applicators, and a spare cap so you can apply exactly the amount you need with minimal waste. Use it as a dedicated thermal grease 3d printer solution or as a targeted thermal interface printer lubricant for high-heat heater blocks and electronics (not for mechanical rails or bearings).
Full Specifications
| Brand | Slice Engineering |
|---|---|
| Item Form | Grease |
| Liquid Volume | 0.5 Cubic Centimeters |
| Container Type | Syringe |
| Number of Items | 1 |
| Package Information | Syringe |
| Warranty Description | Limited Lifetime Warranty |
| Recommended Uses For Product | Electrical |
| Full listing title | Slice Engineering Thin Film Thermal Grease for 3D Printer | High-Temperature Grease Paste Replacement | High-Performance Non-Conductive for Heat Transfer |
Ready to buy?
Slice Engineering Thin Film Thermal Grease for 3D Printer | High-Temperature Grease Paste Replacement | High-Performance Non-Conductive for Heat Transfer is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Jellyfin Home Media Server on a Raspberry Pi 4 (8GB) in 2026
- AMD Ryzen AI Max for Local LLMs: What the Specs Mean
- From AWE32 to BlasterX G6: The Sound Blaster Lineage for Modern Retro Rigs
- Best Controller for Forza Horizon 6 on PC (2026)
- Best Sim Racing Wheel Setup for Beginners in 2026
- Step 3.7 Flash vs Gemma 4 12B: Which Local Model Wins on a 12GB GPU?
- Best AM4 Gaming CPU in 2026: Ryzen 7 5800X vs 3700X vs 3900X vs Intel i7-9700K
- Voodoo 5 6000 Verdict: What the Lab Established and Tests Next
- CompactFlash Boot Drive for Windows 98 Retro PC: The 2026 Transcend CF133 Recipe
- Logitech G920 vs HORI Racing Wheel: Best Wheel for Forza Horizon 6
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Best GPU for 1080p Esports in 2026: High-Refresh Without Overspending
- Ryzen 7 9800X3D vs 7800X3D upgrade guide
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- CRT Monitor vs TV for Retro Gaming: Which Actually Looks Right?
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs ML240L
- Can a Ryzen 5 5600G Run Local LLMs With No GPU? CPU + iGPU Inference Tested
- Best Single-Board Computer for a 2026 Home Lab
- Cursor Launches Its Own AI Model and Git Platform: What Changes
- How to run Llama 3.1 70B on Apple M4 Max
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- Building a CompactFlash Boot Drive for a Windows 98 Retro PC
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
- Air vs AIO for the Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090