PUSOKEI PWM Ultra Thin Cooling Fan
Bottom line: The PUSOKEI PWM Ultra Thin Cooling Fan is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Confirm socket / form-factor / power-rating compatibility against your build before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
How to Use:Plug and playSpecification:Item Type: Cooling FanMaterial: ABSSize: Approx. 80 x 80 x 10mm / 3.1 x 3.1 x 0.4inBearing Type: HydroRated Voltage: 12VRated Current: 0.20±10% AmpAir Volume: 22CFMNoise: 26±10%dBASpeed: 2500±10%RPMLife: 40,000 HoursPackage List:1 x Cooling Fan1 x Screw Bag
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for PUSOKEI PWM Ultra Thin Cooling Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Low Noise ] This cooling fan uses hydraulic bearings, with low noise during and long service life, you can use it for a long time.
- [Quick Heat Dissipation] With 2500±10% RPM speed, the fan has large air volume, fast heat dissipation, effectively reducing the temperature.
- [Intelligent Speed Regulation] This chassis fan also supports PWM intelligent speed regulation, it can adjust the speed according to needs.
- [Ultra Thin Body] Using an ultra thin body design, this fan is small in size, light in weight, and does not take up much space, convenient to use.
- [Wide Application] The cooling fan can be used for computer cases, automotive industry, electronic equipment, communication equipment, etc.
Full Specifications
| Brand | PUSOKEI |
|---|---|
| Voltage | 12 volts |
| Wattage | 2.4 watts |
| Material | Acrylonitrile Butadiene Styrene |
| Dimensions | 80 x 80 x 10mm |
| Unit Count | 1 Count |
| Noise Level | 10 db |
| Part Number | PUSOKEIm4g26novzh1614 |
| Material Type | Acrylonitrile Butadiene Styrene |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 22 cfm |
| Compatible Devices | Desktop |
| Power Connector Type | pin |
| Maximum Rotational Speed | 2500 rpm |
| Item Dimensions L x W x H | 3.15"L x 0.39"W x 3.15"H |
| Full listing title | PUSOKEI PWM Ultra Thin Cooling Fan, 4 PIN High Performance With Hydraulic Bearings, 2500RPM Low Noise for Computer Cases, 80 x 80 x 10mm |
Benchmark data for other processors
Ready to buy?
PUSOKEI PWM Ultra Thin Cooling Fan, 4 PIN High Performance With Hydraulic Bearings, 2500RPM Low Noise for Computer Cases, 80 x 80 x 10mm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for PS5 Console Storage Expansion in 2026
- Tenstorrent TT-QuietBox 2 (Blackhole) vs RTX 5090: Should LLM Builders Care?
- 1998 3dfx Voodoo2 SLI Build Guide: Period-Correct Glide Gaming with a CompactFlash Boot Drive
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- Asus ProArt PA27USD OLED Lands — and What 4K Gamers Can Buy for Less
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- CompactFlash as an IDE Drive: Silent, Period-Correct Storage for Win98 Rigs
- Best Hardware for Running Small Language Models Locally in 2026
- Why AI Memory Bandwidth Matters: From Micron's HBM to Your GDDR6
- LLM-Driven Driver Install on Windows 98: How Claude Walks Voodoo + Sound Blaster Setup
- Best USB Microphone for Streaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- IPEX-LLM + Ollama in Docker on Intel Arc: The 2026 Setup Guide
- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
- Building a DualSense PC Adapter with a Raspberry Pi for $20 (2026)
- Intel Arc for Stable Diffusion: VRAM, Setup & Benchmarks 2025
- Ryzen 5 5600G APU for Local LLM Inference in 2026: What You Can Actually Run
- 8BitDo SN30 Pro on SNES Classic and Genesis Mini: Bluetooth Setup Guide
- Sound BlasterX G6 for DOS and Win98 Retro Gaming: SBEMU and Real-Mode Audio
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Best Retro PC Building Tools & Adapters 2026: The Kit That Ships the Build
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Best PC Gaming Controller 2026: GameSir G7 SE vs 8BitDo Pro 2 vs Sony DualSense
- Imaging a vintage IDE hard drive with a USB adapter in 2026
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5080
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090