Unmanaged 8-Port 2.5G 30W PoE Ethernet Switch with 2-Port 10G SFP+ | IEEE 802.3af/at, 48~57VDC Power Input
Bottom line: Per its Amazon listing, the Unmanaged 8-Port 2.5G 30W PoE Ethernet Switch with 2-Port 10G SFP+: the switch equipped with 8 10/100/1000M/2.5Gbps RJ45 Port; the Ethernet Switch requires 48~57V DC power input.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ The switch equipped with 8 10/100/1000M/2.5Gbps RJ45 Port
- ✓ The Ethernet Switch requires 48~57V DC power input
- ✓ Backed by Xnyahitog's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Overview:It is an 8 ports 10/100/1000M/2.5G Base-TX + 2 port 10G SFP+ Base-FX Hardened PoE switch. The Switch provides 8 port PoE+ function for kinds of Powered Devices to receive power as well as data over the RJ-45 cable. The 10G SFP+ Base-FX supports 1 or 2 core Single-mode or Multi-mode fiber. With its reliable design and ease of use, the product is a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points between remote locations.Features:1. 8 10/100/1000M/2.5GBase-TX + 2 10G SFP+ Base-FX2. 10/100/1000M/2.5Gbps RJ45 Port Supports…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Unmanaged 8-Port 2.5G 30W PoE Ethernet Switch with 2-Port 10G SFP+, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the networking category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【8-Port 10/100/1000M/2.5G Base-TX】The switch equipped with 8 10/100/1000M/2.5Gbps RJ45 Port, provide higher gigabit speeds capable of up to 2.5Gbps over existing Cat5e or better cabling.
- 【2-Port 10G SFP+ Base-FX 】The switch offers 2 10G SFP+ Base-FX ports for high-speed network connections providing a cost-effective solution in adding 10G link capability.
- 【8-Port PoE+ function】The Switch provides 8-port IEEE802.3af/at PoE+(30W) function for kinds of Powered Devices to receive power as well as data over the RJ-45 cable.
- 【48-57VDC Redundant Power Input】The Ethernet Switch requires 48~57V DC power input, In this way, its poe function can be used smoothly.
- 【Reliable design & Din-rail installation】With its reliable design and ease of use, it is a great choice for integrating networks consisting of network devices such as IP cameras and wireless access points between remote locations.
Full Specifications
| Brand | Xnyahitog |
|---|---|
| Color | Black |
| Weight | 2.5g |
| Voltage | 57 volts_of_direct_current |
| Platform | No Operating System |
| Interface | RJ45, SFP+ |
| Unit Count | 1 Count |
| Switch Type | Unmanaged |
| Connectivity | Wireless |
| Model Number | PoE 2.5G 8RJ45+2SFP |
| Compatibility | Switch |
| Maximum Power | 30 watts |
| Built-In Media | 1* Terminal block, 1* Un-managed 8-port 2.5G PoE RJ45 + 2-port 10G SFP Ethernet Switch, 1* User Manual |
| Connection Type | Wireless |
| Mfr Part Number | 2F8P-2.5G |
| Number of Items | 1 |
| Number of Packs | 1 |
| Number of Ports | 10 |
| Case Material Type | Aluminum |
| Compatible Devices | Camera, Ip Cameras, Router, Voip Phones, Wireless Access Points |
Ready to buy?
Unmanaged 8-Port 2.5G 30W PoE Ethernet Switch with 2-Port 10G SFP+ | IEEE 802.3af/at, 48~57VDC Power Input is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Upgrading From an RTX 3080 in 2026: What to Buy
- Logitech G502 Hero vs MK270 Combo: Best PC Setup for Sub-$50
- Intel i7-9700K vs Ryzen 7 5700X for a Budget 2026 Gaming Build
- HyperX QuadCast 2 vs Blue Yeti: Best USB Mic for Game Streaming in 2026
- Best CPU Cooler for AMD Ryzen Builds in 2026
- Best GPU for Forza Horizon 6 at 1440p in 2026 (Without Breaking the Bank)
- Local LLMs on the Ryzen 5 5600G: llama.cpp CPU Inference Numbers
- Ryzen 7 5800X vs Ryzen 5 5600G for Gaming and Streaming
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Build a Raspberry Pi 4 NVMe Jellyfin Homelab Box in 2026
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- Best Wireless Productivity Keyboards for Home Office in 2026
- Hosting a Period-Correct LAN Party in 2026: Quake 3, UT99, and the Gear That Still Works
- Best GPU for Running 27B-32B Local LLMs in 2026
- ComfyUI on an RTX 3060 12GB: Real Image-Gen Throughput in 2026
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- Jellyfin on a Raspberry Pi 4 8GB: What It Can and Can't Transcode
- RTX 5070 vs 5080: Which GPU Fits Your Build?
- Used RTX 3090 for Local LLMs (Nov 2026): Real Prices, Speeds, Servicing
- DIY Steam Controller Puck Adds Xbox, Switch and PS Emulation Modes
- The Half-Life Mod Era That Built Modern Multiplayer: Counter-Strike, Day of Defeat, TFC, Natural Selection
- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090