4 Locking Tabs DFP-14NWBCT1 Replacement Clear Food Processor Work Bowl Cover, Compatible with Cuisinart Tritan food Processor Only fits Bowl DLC-005AGTXT1,Fits Model DFP-14, DFP-14BCN, DFP-14BCHN
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-08-15. Price and availability subject to change.
Bottom line: The 4 Locking Tabs DFP-14NWBCT1 Replacement Clear Food Processor Work Bowl Cover, Compatible with Cuisinart Tritan food Processor Only fits Bowl DLC-005AGTXT1,Fits Model DFP-14, DFP-14BCN, DFP-14BCHN is a specs-and-price decision rather than a crowd-consensus one in the retro cpus category, priced around $31.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
SpecPicks Verdict
SpecPicks scored 4 Locking Tabs DFP-14NWBCT1 Replacement Clear Food Processor Work… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the retro cpus category. IHOUMEX's retro cpus lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpus of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ After-sales service: If you have any questions, please contact us, we will answer for you
- ✓ Backed by IHOUMEX's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Please Note: When you buy, look at the edge of your food processor bowl to see if the locking orientation is two lugs or four lugs. Food mixers have evolved over time. The model is the same, but the direction of the lock bowl is different! A lot of 80/90 machines are still working and there will be an error changing the work bowl. The difference between them is two lugs and four lugs. This Work Bowl With Handle 4locking lugs.
- Precise Compatibility: Designed exclusively for food processor models DFP-14, DFP-14BCHN, DFP-14BCN, DFP-14BCNR, DFP-14BCNY, DFP-14BCWN, DFP-14BKSY, DFP-14BWN, and DFP-14CPY. Ensure your work bowl's model number is DLC-005AGTXT1 for seamless performance and perfect fit
- 4 Locking Tabs Design: Specifically designed for work bowls with 4 locking tabs on the top. Not compatible with bowls featuring 2 locking tabs, ensuring secure and stable operation
- BPA-Free Material: Crafted from BPA-free materils, this work bowl cover guarantees the safety and health of your food, making it a reliable choice for your kitchen
- The product is not suitable for the following models: 1. Cuisina Deluxe 11, 2. DCN (Type 33)
- After-sales service: If you have any questions, please contact us, we will answer for you
Full Specifications
| Brand | IHOUMEX |
|---|---|
| Color | transparent |
| Wattage | 660 watts |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Model Name | 4 Locking Tabs DFP-14NWBCT1 |
| Unit Count | 1 Count |
| Part Number | DFP-14NWBCT1 |
| Model Number | DFP-14NWBCT1 |
| Bowl Capacity | 14 cups |
| Number of Items | 1 |
| Special Feature | Removable Parts |
| Special Features | Removable Parts |
| BPA-Free Material | Crafted from BPA-free materils, this work bowl cover guarantees the safety and health of your food, making it a reliable choice for your kitchen |
| After-sales service | If you have any questions, please contact us, we will answer for you |
| Included Components | Clear Food Processor Work Bowl Cover |
| Item Dimensions D x W x H | 4.25"D x 7"W x 4.25"H |
| Product Care Instructions | Hand Wash |
| Recommended Uses For Product | Blend, Chop, Liquefy |
Ready to buy?
4 Locking Tabs DFP-14NWBCT1 Replacement Clear Food Processor Work Bowl Cover, Compatible with Cuisinart Tritan food Processor Only fits Bowl DLC-005AGTXT1,Fits Model DFP-14, DFP-14BCN, DFP-14BCHN is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-08-15. Price and availability subject to change.
Related Retro CPUs
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Voodoo 3 3500 TV vs GeForce 256 DDR: The Last Great 1999 Gaming GPU Showdown
- Best Budget Gaming Peripherals Under $100 in 2026
- Best CPU Cooler for AMD Ryzen 7 5800X High-TDP Builds (2026)
- Ryzen 5 5600G vs Core i7-9700K for a Budget 1080p Gaming Build
- Samsung 256GB microSD Drops to $47.99 — 40% Off Storage Deal
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- AI-Driven Driver Hunting on WinXP: Using Vision LLMs to Install Audigy 2 ZS Without Internet
- Gemma-4-Harmonia-31B Uncensored on RTX 3060 12GB: Quantization, VRAM, and tok/s
- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
- Linux Gaming Keeps Getting Faster: Windows APIs Land in the Kernel
- Ryzen 7 9800X3D Hits Record-Low Price — and the 5800X Value Case
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Voodoo3 3500 TV on Windows 98 SE: AI-Assisted Driver Install Walkthrough in 2026
- RetroPie Handheld Case Comparison 2025: Top Picks
- Intel's Bartlett Lake Core 9 273PQE Loses to a 4-Year-Old CPU
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- What Hardware Runs a Gemini-Class Model Locally in 2026?
- Build a Motion-Triggered Wildlife Camera on Raspberry Pi (2026)
- Best CPU Cooler for AM4 Ryzen Overclocking in 2026
- Samsung Winds Down Memory Output Before 18-Day Strike — SSD Price Watch
- Noctua NH-U12S vs Cooler Master ML240L for Ryzen 5800X
- Building a Period-Correct 2003 WinXP Gaming Rig with Sound Blaster Audigy and a Modern 8BitDo Controller
- Microsoft + NVIDIA's 'Agent PC': What Local Hardware Does an On-Device AI Agent Actually Need in 2026?
- Ryzen AI Max+ 'Gorgon Halo' 192GB vs RTX 3060 12GB for Local LLMs (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090