ALL- LUCKY
ALL-LUCKY USB to Ethernet Adapter
Bottom line: The ALL-LUCKY USB to Ethernet Adapter ($14.99 on Amazon as of 2026-10-06): 4-in-1 hub: 3 USB 3.0 ports plus one Gigabit Ethernet jack; main trade-off: no pass-through charging; caps at 900mA output current.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 4-in-1 hub: 3 USB 3.0 ports plus one Gigabit Ethernet jack
- ✓ Gigabit port rated up to 1000Mbps, also runs 10/100Mbps
- ✓ Convertible connector switches between USB-A and USB-C devices
- ✓ USB 3.0 lane supports up to 5Gbps, backward compatible with 2.0
- ✓ Plug-and-play on Win 11/10/8, macOS, iPadOS, ChromeOS, no driver
Cons
- ✗ No pass-through charging; caps at 900mA output current
- ✗ Windows 7 needs a manual driver install
- ✗ Requires a CAT6 or better cable to actually hit 1Gbps
- ✗ Only 3 USB ports, no HDMI, SD card, or extra power delivery
SpecPicks Verdict
SpecPicks scored ALL-LUCKY USB to Ethernet Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the retro networking cards category. ALL- LUCKY's retro networking cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro networking cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [Expansion Ports] The USB C to Ethernet Adapter expands the device to three USB 3.0 ports and one Gigabit Ethernet port. Provides you more peripheral ports while maintaining a stable network connection, plug and play, no driver required.
- [Gigabit Network Port] ALL-LUCKY USB Ethernet Adapter transmission rate up to 1000Mbps, also compatible with 10/100Mbps bandwidth. It allows you to enjoy a smooth and stable network connection and avoid too much lag. (Note: To reach 1Gbps, please use CAT6 or above Ethernet cable connection)
- [Convertible Connector]This usb hub with ethernet not only has USB-A connector, but also can be converted to USB-C connector, so that you can easily convert the connector according to the device port, improve the convenience of use.
- [High-Speed Data Transfer] The usb to ethernet adapter adopts USB 3.0 transmission technology, supports up to 5Gbps transmission rate, and is compatible with USB 2.0(480Gbps),USB 1.0(12Mbps), easily transfer video, files and other data for you in seconds. (Note: Maximum output current is 900mA, does not support charging devices.)
- [Widely Compatible]The usb c ethernet adapter for iMac, MacBook Pro, iPad Pro, XPS and many other devices. Compatible with Windows 11/10/8.1/8, Mac OS, iPad OS, Chrome OS.（Note: Driver is required on Win 7） It can be used in office, school, library and other occasions, compact and portable, easy to carry around.
Full Specifications
| Brand | ALL- LUCKY |
|---|---|
| Color | （Black-03）4 in 1 USB A/C to Ethernet Adapte |
| Unit Count | 1 Count |
| Connectivity | USB-C |
| Compatibility | Mac |
| Built-In Media | Usb To Ethernet Adapter Hub |
| Mfr Part Number | HT-00603R |
| Number of Ports | 4 |
| Special Feature | Fast Data Transfer, Lightweight, Plug and Play |
| Total Usb Ports | 3 |
| Compatible Devices | Hard Disk Drive, Laptops, MacBook Pro, Mouse, iPad |
| Data Transfer Rate | 5 gigabits_per_second |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS) |
| Hardware Interface | Ethernet, USB 3.0 |
| Additional Features | Fast Data Transfer, Lightweight, Plug and Play |
| Warranty Description | 1 year maunfacturer |
| Item Dimensions L x W x H | 1.2"L x 0.55"W x 4.3"H |
| Full listing title | ALL-LUCKY USB to Ethernet Adapter, 4 in 1 USB C to Ethernet Adapter Hub with 3 x USB 3.0 Port/Gigabit Internet Port, High-Speed Network Hub Compatible for iMac,MacBook Pro |
Ready to buy?
ALL-LUCKY USB to Ethernet Adapter, 4 in 1 USB C to Ethernet Adapter Hub with 3 x USB 3.0 Port/Gigabit Internet Port, High-Speed Network Hub Compatible for iMac,MacBook Pro is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Fully Local PDF-to-Audiobook Pipeline on Jetson Orin Nano Super
- Best Gaming Monitor for 1440p in 2026
- Best PC Game Controller in 2026
- Best GPU for a Homelab in 2026: AI, VMs & Budget Picks
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Setup and Real tok-per-image Math
- 'Count Anything' AI Model Does Object Counting — Harder Than It Sounds
- Raycast FPS in COBOL: Can a 60-Year-Old Language Render 3D?
- Two GTX 1050 Ti 4GB vs One RTX 3060 12GB for 8B Local LLMs
- Cerebras Running GPT-5.4 and 5.5 Internally: What it Means for Local LLM Builders
- Qwen 3.6 27B vs Gemma 4 31B Local Inference: VRAM, Tok/s, and Quality Across Quantizations
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- MSI RTX 3060 Ventus vs ZOTAC RTX 3060 Twin Edge: Which 12GB Card to Buy
- MLX engine comparison… and oMLX is the top choice.
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Anthropic Backs Off Billing Overhaul as Price War Heats Up
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- 50+ Raspberry Pi Project Ideas for 2025 (By Skill Level)
- ZOTAC RTX 3060 Twin Edge vs MSI Ventus 2X: Which 12GB Card for a Quiet Build?
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Building a CompactFlash Boot Drive for a Windows 98 Retro PC
- How to Build a Fully Declarative Homelab Stack
- Steam Deck OLED vs Legion Go S: 2026 Comparison
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090