Skip to main content
Microphone Arm,Aokeo AK-55i Desk Low Profile Adjustable Mic Boom Arm Stand,Suitable For Blue Yeti,Snowball iCE, HyperX QuadCast,SoloCast,Elgato Wave,Etc
Aokeo

Aokeo Microphone Arm

Bottom line: The Aokeo Microphone Arm ($42.99 on Amazon as of 2026-10-06): Low profile shape keeps the boom below your monitor and out of the camera frame; main trade-off: 2kg load ceiling rules out heavier broadcast mics in full shock mounts.

$42.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $42.99 Compare to similar streaming gear

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Low profile shape keeps the boom below your monitor and out of the camera frame
  • ✓ Both joints rotate 360 degrees; the mic arm also swings 180 degrees up and down
  • ✓ Includes 3/8 to 1/4 inch and 3/8 to 5/8 inch adapters for most mics and shock mounts
  • ✓ Underside channel hides and secures the USB or XLR cable along the arm

Cons

  • ✗ 2kg load ceiling rules out heavier broadcast mics in full shock mounts
  • ✗ Clamp only fits desktops under 7cm thick; no grommet mount included
  • ✗ Arm crosses the bottom of your screen, which can cut into the lowest display rows
  • ✗ Microphone is not included in the package

Manufacturer description

The Aokeo AK-55i is a low profile desk microphone arm built for creators who want the boom out of their sightline. Instead of arching overhead, it runs flat along the bottom edge of your monitor, lowering the center of gravity so the mic holds position when you bump the desk, type hard, or lean in mid-stream. Both arm segments rotate a full 360 degrees, and the mic-side arm swings 180 degrees up and down, so you can dial in placement from almost any clamp location. The clamp fits desktops under 7cm thick, and the included 3/8 to 1/4 inch and 3/8 to 5/8 inch adapters cover most studio mics…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Aokeo Microphone Arm using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. Aokeo's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this arm hold a Blue Yeti or HyperX QuadCast?

Yes. Aokeo lists the Blue Yeti, Snowball iCE, HyperX QuadCast and SoloCast, and Elgato Wave as compatible, and the 3/8 to 5/8 inch adapter covers those threads. Just stay under the 2kg maximum load.

How thick can my desk be for the clamp to fit?

The clamp fits tables less than 7cm thick, roughly 2.75 inches. Measure the edge where you plan to mount, not the center, since many desks taper.

Does a microphone come with it?

No. The package includes the arm, the desk clamp, and the 3/8 to 1/4 inch and 3/8 to 5/8 inch adapters. The microphone is sold separately.

Can I run the mic cable through the arm?

Yes. The bottom of the arm has a channel that hides and secures the cable along its length, so the USB or XLR run stays off your desk surface.

Does a low profile arm sag or shift while streaming?

The low profile layout puts the center of gravity closer to the desk, which Aokeo cites as the reason it holds position during handling. The forged steel build carries one year of after-sales support.

Key Features

  • EXTREME STABILITY: The low profile design of this microphone arm allows for a lower centre of gravity of the mic arm, which dramatically improves stability. It ensures that the microphone position is fixed and unchanged, without shaking or shifting, even during intense handling, providing you with clear, noise-free recordings. Perfect for gaming, podcasting, recording and streaming.
  • Flexible Height Adjustment:both arms can rotate 360°. The arm with the microphone attached can also swing up and down 180°. No matter where your microphone base clips on, you can adjust the microphone to the position you want. Fits all tables less than 7cm thick.
  • REDUCED VISUAL DISTURBANCE:The low profile shape won't stand out in your work or play area, and the stand arm extends across the bottom of your computer screen. The bottom of the arm also hides and secures your microphone cable. Reduces line-of-sight distractions, allowing you to focus more on your work or entertainment content.
  • COMPATIBLE:This mic stand desk comes with a 3/8‘’ to 1/4‘’ adapter and 3/8‘’ to 5/8‘’ adapter. Maximum load capacity is up to 2KG, compatible with most of the microphones or microphone shock mounts on the market. Compatible with most of the microphone or microphone shockmounts on the market. Convenient to carry and store when you go out to participate in activities.
  • QUALITY ASSURANCE:This low profile mic arm is made of high-quality steel forging, sturdy and durable, and not easy to be deformed or damaged even after long-term use. This product provides one year after-sales service, please feel free to contact us if you have any questions. (Microphone is not included in the package）

Full Specifications

BrandAokeo
ColorAK-55i
StyleDesk Low Profile Adjustable Mic Boom Arm
Weight2kg
MaterialMetal
Base TypeFlat
Model NameAK-55i
Finish TypePowder Coated
Material TypeMetal
Product StyleDesk Low Profile Adjustable Mic Boom Arm
Maximum Height2 meters
Number of Items1
Body Material TypeMetal
Warranty Description1 year warranty.
Manufacturer Part NumberAK-55i
Mount thread size (inches)3/8‘’ ,5/8‘’,1/4‘’ inches
Microphone Stand Thread Size1/4 inch, 3/8 inch, 5/8 Inch
Maximum Weight Recommendation4.4 pounds
Full listing titleMicrophone Arm,Aokeo AK-55i Desk Low Profile Adjustable Mic Boom Arm Stand,Suitable For Blue Yeti,Snowball iCE, HyperX QuadCast,SoloCast,Elgato Wave,Etc

Ready to buy?

Microphone Arm,Aokeo AK-55i Desk Low Profile Adjustable Mic Boom Arm Stand,Suitable For Blue Yeti,Snowball iCE, HyperX QuadCast,SoloCast,Elgato Wave,Etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $42.99

*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.

Related Streaming Gear

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Microphone Arm,Aokeo AK-55i Desk Low Profile Adjustable Mic Boom Arm Stand,Suitable For Blue Yeti,Snowball iCE, HyperX QuadCast,SoloCast,Elgato Wave,Etc
$42.99
View on Amazon →