JRready ST6548 Molex .093" 2 3 4 6 Pin Connector Kit
Bottom line: Per its Amazon listing, the JRready ST6548 Molex .093" 2 3 4 6 Pin Connector Kit: compatible with Molex connector standard .093 "Series connector-5.03MM pitch; pin 2.36mm diameter, Wire range 14-20 AWG (0.5mm²to 2mm²), rated current 12A.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compatible with Molex connector standard .093 "Series connector-5.03MM pitch
- ✓ Pin 2.36mm diameter, Wire range 14-20 AWG (0.5mm²to 2mm²), rated current 12A
- ✓ Backed by JRready's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JRready ST6548 Molex .093" 2 3 4 6 Pin Connector Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Housing Connector Performance】 The housing connectors is made of PA66 material, 2.36mm diameter, rated voltage is 250V AC/DC, operating temperature -40℃ to +105℃, the flame retardant grade is UL94-V2. Compatible with Molex connector standard .093 "Series connector-5.03MM pitch. PLEASE NOTE: The connector housing is transparent white. Exposure to air may result in slight color differences, but it doesn't affect the performance of the product. If you have any questions about this, please contact us anytime.
- 【JRready Housing Connector Design】 The housing use a snap-in design ,the buckle does not loosen or fall, easy to disassemble and assemble and supports free assembly of connectors and pin jack terminals. different shape design of the two end of socket avoid mis-matching during the assembly process.
- 【Terminal Contact】 The terminals are made of tin-plated brass for better electrical conductivity, oxidation and corrosion resistance. Dual-locking tangs help prevent backing out ensuring a strong electrical connection. Opening design reduces the insertior force and improves the insertion and extraction durability more than 100 times. Pin 2.36mm diameter, Wire range 14-20 AWG(0.5mm²to 2mm²), rated current 12A.
- 【Compatible with MOLEX Models】 Molex Standard .093" Series Connectors: 2 pin connector-03091022/03092022; 3 pin connector-03091032/03092032; 4 pin connector-03091042/03092042; 6 pin connector-03091064/03092062; Contacts pin: 02092101 / 02092103,socket: 02091102 / 02091104.
- 【Pin Extractor Tool 】The unique smooth built-in plunger design pushes pins out from behind the connector blocks, the pull-out and lock protective cover effectively safeguards the tips. The pin extractor tool features a chamfered design for accurate fit with connectors. Made from special materials with hardness up to HV500, these tips ensure durability, wear resistance, and toughness.
Full Specifications
| Brand | JRready |
|---|---|
| Color | White |
| Model | ST6548 |
| Terminal | Pin Terminal |
| Part Number | ST6548 |
| Material Type | Plastic |
| Connector Type | Pin |
| Maximum Voltage | 250 Volts (AC) |
| Contact Material | Brass |
| Specification Met | UL |
| Insulation Material | Nylon |
| Insulation Material Type | Nylon |
| Full listing title | JRready ST6548 Molex .093" 2 3 4 6 Pin Connector Kit with Pin Extractor Electrical Automotive Power Wire Connector 14-20AWG Terminals Pins and Sockets 1490 1261 Series Male Female Connectors Housings |
Ready to buy?
JRready ST6548 Molex .093" 2 3 4 6 Pin Connector Kit with Pin Extractor Electrical Automotive Power Wire Connector 14-20AWG Terminals Pins and Sockets 1490 1261 Series Male Female Connectors Housings is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- MSI RTX 3060 12GB in 2026: Still the Right 1080p GPU?
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Best Upgrades for a DDR4 Gaming PC in 2026
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5080
- Raspberry Pi OS Moves to Linux 6.18 LTS: What the Kernel Jump Means for Pi 4 Owners
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- CompactFlash as a Win98 Hard Drive: IDE Adapter Setup Guide
- Adafruit Ships a Triple LED Matrix Bonnet for the Raspberry Pi
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Crucial BX500 1TB vs Samsung 870 EVO: Best SATA SSD for a Budget or Retro Build (2026)
- Linux Fu: Upcycling an Old Router in 2026
- Best Gaming Mouse for Warzone & FPS Esports in 2026
- How to Run a Public Website on a $10 ESP32 Without Servers
- Can a Raspberry Pi 4 Run the Oomwoo Open-Source Robot Vacuum Brain?
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- AMD Ryzen AI Max 400 'Gorgon Halo': What 192GB of Unified Memory Unlocks for Local AI
- Logitech Slashes Gaming Mouse Prices up to 47% for Prime Day
- Best 1440p 240Hz Gaming Monitors in 2026
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Best Streaming Starter Kit for New Twitch Streamers in 2026
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090