CRJ Electronics CRJ 3-Pin RGB Lighting Extension Cable for Corsair
Bottom line: Per its Amazon listing, the CRJ Electronics CRJ 3-Pin RGB Lighting Extension Cable for Corsair ($7.99 on Amazon as of 2026-11-20 13:45 UTC): total cable length (including connectors) is 12 inches (30cm).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Total cable length (including connectors) is 12 inches (30cm)
- ✓ Backed by CRJ Electronics's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CRJ Electronics CRJ 3-Pin RGB Lighting Extension Cable for Corsair, so this read rests on the manufacturer's listed specs and the current price in the rgb & lighting category (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Premium Extension for Corsair Lighting: Designed for extending Corsair 3-Pin RGB lighting connections, with a 12-inch (30cm) length for easier cable management and system design
- Broad Compatibility: This is a direct pass-through extension cable featuring latching MX/SL 2.54mm male and female connectors, suitable for any electronics device featuring this connector
- High-Quality Materials: Constructed with premium high density black sleeving, this cable combines functionality with a clean, professional aesthetic
- Corsair Compatibility: Lighting Node Pro, Commander Pro, Commander Core XT (3-pin port), LS-100 (iCUE software)
- Total cable length (including connectors) is 12 inches (30cm)
Full Specifications
| Full listing title | CRJ 3-Pin RGB Lighting Extension Cable for Corsair - 12-inch, Premium Black Sleeved - for Corsair iCUE RGB Lighting System |
|---|
Ready to buy?
CRJ 3-Pin RGB Lighting Extension Cable for Corsair - 12-inch, Premium Black Sleeved - for Corsair iCUE RGB Lighting System is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Can a 12GB RTX 3060 Still Run 2026's Local LLMs?
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Raspberry Pi Zero W vs Pi 4 for a 2026 Cyberdeck: Which Board Fits?
- Ryzen 7 9800X3D vs Ryzen 9 9900X: Which Zen 5 CPU Wins in 2026?
- IBM Granite 4.1 8B vs Qwen 3.6 27B: Which Small Local Model Wins on a 16GB GPU?
- Best CPU for Streaming and Gaming on a Single PC in 2026
- RTX PRO 6000 vs RTX 5090 for Local 70B LLMs: 96GB vs 32GB
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- Lenovo G02 Retro Handheld Reportedly Ships With Pirated Game Library
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
- Best Raspberry Pi Alternative for Klipper (2025 Guide)
- Cerebras Running GPT-5.4 and 5.5 Internally: What it Means for Local LLM Builders
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- Best CPU Under $300 for a 1080p Gaming Build (2026)
- Best Starter Kit for Learning Robotics on Raspberry Pi (2026)
- VibeThinker-3B on an RTX 3060 12GB: Reasoning in 3 Billion Params
- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Raspberry Pi 4 8GB vs Pi Zero W for RetroPie: Which Board Wins?
- Best Budget Gaming SSDs Under $100 in 2026
- Best GPU for Qwen3 8B in 2026
- Best Gaming Mouse for FPS Esports Under $100 (2026)
- Is 12GB VRAM Still Enough for Local LLMs in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090