NYVKBRR Gearshift & Handbrake Holder Compatible with Playseat Trophy Seats
Bottom line: The NYVKBRR Gearshift & Handbrake Holder is a specs-and-price decision rather than a crowd-consensus one in the sim racing category, priced around $48.99 on Amazon as of 2026-11-21 21:45 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for NYVKBRR Gearshift & Handbrake Holder, so this read rests on the manufacturer's listed specs and the current price in the sim racing category (how we evaluate). Compare with similarly-priced alternatives in the sim racing category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Compatible with Playseat Trophy Seats – Designed for Playseat Trophy racing seats, including the Trophy Logitech G Edition. This is a third-party compatible accessory; racing seat, gear shifter, and handbrake are not included.
- Reversible Side Mounting – Install the holder on the left or right side of the racing seat to match your preferred driving position, room layout, and cockpit setup.
- Flexible Mounting Configuration – Use the mounting plate for one gear shifter or combine a shifter and handbrake on the same holder. Multiple pre-drilled mounting points support different installation layouts. Check device hole spacing before purchase.
- Stable Metal Support – The thick steel mounting plate and reinforced structure help reduce movement during shifting and handbrake operation, providing dependable support for sim racing sessions.
- Complete Mounting Kit – Includes the holder components, mounting screws, and installation wrenches needed to attach the bracket to a compatible Playseat Trophy seat. No electronic components are included.
Full Specifications
| Brand | NYVKBRR |
|---|---|
| Color | black |
| Model Name | X003 |
| Model Number | X003 |
| Controller Type | Gear Shifter |
| Item Dimensions | 9.84 x 7387 x 3.9 inches |
| Hardware Platform | Not Machine Specific |
| Compatible Devices | Racing Shifter, Sim Racing Handbrake |
| Included Components | Screws & Wrenches |
| Connectivity Technology | USB |
| Full listing title | NYVKBRR Gearshift & Handbrake Holder Compatible with Playseat Trophy Seats | Steel Sim Racing Mount with Left/Right Installation, Single or Dual Device Setup, and Mounting Hardware Included |
Ready to buy?
NYVKBRR Gearshift & Handbrake Holder Compatible with Playseat Trophy Seats | Steel Sim Racing Mount with Left/Right Installation, Single or Dual Device Setup, and Mounting Hardware Included is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Running a Local Bug-Hunting LLM on an RTX 3060 12GB
- Best Hardware for Running MoE LLMs Locally in 2026
- Irtysh 32-Core CPU: Is the 30+ FPS Witcher 3 Claim Real?
- On-Device AI Keyboards: Can an RTX 3060 12GB Train the Model?
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5080
- Claude Mythos: What Anthropic Found + Why Regulators Were Briefed
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- RX 7900 XTX 24GB vs RTX 4080 16GB for Local LLM Inference (2026)
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- How to Filter Steam Deck's 20K+ Games by FPS, Price, HLTB
- Best Streaming Gear for New Creators in 2026
- Best DualSense and PC-Compatible Controller (2026)
- OpenAI Now Uses AI to Red-Team Its Own Models: What It Means for Local Setups
- Kimi K3 Sold Out the Cloud — Can You Run It Locally?
- Direct3D vs OpenGL vs Glide: The API War That Shaped PC Gaming
- Best CPU Cooler for AMD Ryzen in 2026
- Hobbyists Are Self-Hosting a Nintendo eShop With Ownfoil on a Raspberry Pi
- Quantization on a 12GB GPU: q4 vs q5 vs q8 Tok/s and Quality on the RTX 3060
- Raspberry Pi 4 8GB vs a Used Mini PC for a 2026 Beginner Homelab
- GLM-5.2 Is Now the Most Intelligent Open-Weights Model — and the Most Verbose
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090