MECCANIXITY M2 Male Brass Hex Spacer Standoffs Screws Nuts
Bottom line: The MECCANIXITY M2 Male Brass Hex Spacer Standoffs Screws Nuts is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category, priced around $7.99 on Amazon as of 2026-10-21 10:16 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by MECCANIXITY's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored MECCANIXITY M2 Male Brass Hex Spacer Standoffs Screws Nuts using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. MECCANIXITY's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Versatile Brass Spacer Kit for Electronics, DIY, PC Building, and Upgrade. Perfect for Raspberry Pi, 3D printers, and PCB; essential for motherboard installation, ensuring safe installation and preventing short circuits in desktop computers, works for hard drives, GPU, and other PC, making it a must-have for DIY PC builders
- The Brass Hex Screws Nuts we provide here are kit size: M2; spacer thread size: 2x3+20 mm/ 0.79"x0.12"+0.79"(Dia*Male L*Female L); spacer total size: 3x23 mm/ 0.12"x0.91"(L*W); screw thread size: 2x4 mm/ 0.79"x0.16"(Dia*L); screw total size: 3.3x5 mm/ 0.13"x0.2"(OD*L); nut size: 2x1.5x4 mm/ 0.79"x0.06"x0.16"(Dia*T*W); In the package of: 20 x M2*20+3 Spacers; 20 x M2*4 Screw; 20 x M2 Nut
- The hex standoffs screws nuts kit is made of durable brass, high strength, corrosion-resistant, rust-resistant.
- With clear, neat thread without burrs, easy to install. Widely used in electronics, automotive, machinery, and industrial equipment for spacing and securing panels, gears, and enclosures
- Universal Kit – Fits for Raspberry Pi, motherboards, and common electronics for hassle-free use
Full Specifications
| Size | M2*20+3 |
|---|---|
| Brand | MECCANIXITY |
| Color | Copper |
| Model | 1 |
| Size Name | M2*20+3 |
| Dimensions | 2x1.5x4 mm |
| Unit Count | 20 Count |
| Part Number | mea250521ee004545 |
| Compatibility | PC |
| Item Dimensions | 0.2 x 0.08 x 0.2 inches |
| Number Of Items | 20 |
| Included Components | Screws Nuts |
| Item dimensions L x W x H | 0.2 x 0.08 x 0.2 inches |
| Full listing title | MECCANIXITY M2 Male Brass Hex Spacer Standoffs Screws Nuts, 20 Set Hex Column Screw Nut Assortment Kit M2*20+3 Threaded Standoff for Raspberry Pi PCB Motherboard DIY |
Ready to buy?
MECCANIXITY M2 Male Brass Hex Spacer Standoffs Screws Nuts, 20 Set Hex Column Screw Nut Assortment Kit M2*20+3 Threaded Standoff for Raspberry Pi PCB Motherboard DIY is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- CompactFlash as a Boot Drive: Silent Storage for a Period-Correct Retro PC (2026)
- Retro Nintendo Switch 2 Dock Channels the N64 and Holds Six Game Cards
- GameNative Unlocks Up to 100 FPS PC Gaming on Android
- Best SATA SSDs for Console and Retro PC Upgrades in 2026
- M3 Ultra vs RTX 4090 for local LLMs
- Best PC Gaming Controllers in 2026: 5 Picks for Every Budget
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- Ryzen AI Max Mini-ITX: Framework Desktop Specs Explained
- Retro PC storage in 2026: CompactFlash-to-IDE vs a SATA SSD for Win98/XP
- Intel Axes BigDL/IPEX-LLM: Where Local Inference Goes Now
- GPU Benchmark Data Freshness and Source Attribution in 2026
- Best Raspberry Pi Alternatives for AI in 2026
- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- Build a Magic Mirror 2 Smart Home Hub (2026)
- Handheld Gaming PC Near Me: Where to Buy in 2025
- LLM-Driven Driver Install on Windows 98, 2000, and XP: Vision-LLM Walkthroughs from a 4-PC Retro Fleet
- CompactFlash as an IDE Boot Drive for Your Win98 Retro PC in 2026
- What Is Mistral AI? The OpenAI Rival Explained (2026)
- Can a Raspberry Pi 4 Run the Oomwoo Open-Source Robot Vacuum Brain?
- Simba 3.2 Tops the TTS Leaderboard: Run Local Text-to-Speech on an RTX 3060 12GB
- Logitech G502 Hero vs SteelSeries QcK: The Cheap FPS Setup That Still Wins in 2026
- GTX 1660 VRAM: Why 8GB Doesn't Exist (Real Specs)
- Best AM4 CPU for 1080p Gaming in 2026: 5 Value Picks
- MCL8080+ Squeezes an Intel 8080 Emulator into an ATtiny85
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090