eleUniverse
Ultra-Thin CNC Aluminum Alloy GPIO Passive Cooling Case with Fan for Raspberry Pi 5 2GB/4GB/8GB/16GB
Bottom line: The eleUniverse Ultra-Thin CNC Aluminum Alloy GPIO Passive Cooling Case is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by eleUniverse's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item Compatibility: Custom-designed CNC aluminum alloy case with fan for Raspberry Pi 5 2GB/4GB/8GB/16GB and supports GPIO expansion. Model: N311 Easy Expansion:Support vertical stacking of Raspberry Pi PCIe HAT and GPIO expansion on top, compatible with X1001, X1003, X1000, X1004, X1012, X1015 etc.; HAT expansion may require additional standoffs Ultra-thin & Special design: At just 16 mm thickness saves space, side uses an acrylic panel to avoid affecting the wifi information Heat Dissipation: Widened heat sink and chessboard-style base increase the surface area for improved…
SpecPicks Verdict
SpecPicks scored eleUniverse Ultra-Thin CNC Aluminum Alloy GPIO Passive Cooling Case using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. eleUniverse's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility Custom-designed CNC aluminum alloy case with fan for Raspberry Pi 5 2GB/4GB/8GB/16GB and supports GPIO expansion. Model N311
- Easy ExpansionSupport vertical stacking of Raspberry Pi PCIe HAT and GPIO expansion on top, compatible with X1001, X1003, X1000, X1004, X1012, X1015 etc.; HAT expansion may require additional standoffs
- Ultra-thin & Special design At just 16 mm thickness saves space, side uses an acrylic panel to avoid affecting the wifi information
- Heat Dissipation Widened heat sink and chessboard-style base increase the surface area for improved cooling, equipped with fan cooling
- Packing List 1 x Aluminum Alloy Case with fan, 1 x Screws Pack (Not include Raspberry Pi 5)
Full Specifications
| ASIN | B0FM7BPGC7 |
|---|---|
| Brand | eleUniverse |
| Color | Black with gold accents |
| Material | Aluminum |
| Case Type | Raspberry Pi |
| Model Name | N311 |
| Unit Count | 1.0 Count |
| Item Weight | 120 Grams |
| Manufacturer | eleuniverse |
| Model Number | N311 |
| Cooling Method | Fan |
| Antenna Location | In door use only |
| Compatible Devices | Raspberry Pi 5 (2GB/4GB/8GB/16GB), X1001, X1003, X1000, X1004, X1012, X1015 HAT expansion boards |
| Enclosure Material | Aluminum |
| Product Dimensions | 0.63"D x 0.63"W x 0.63"H |
| Warranty Description | within 3 months |
| Supported Motherboard | Raspberry Pi 5 |
| Item Dimensions D x W x H | 0.63"D x 0.63"W x 0.63"H |
| Motherboard Compatability | Raspberry Pi 5 |
| Recommended Uses For Product | In door use only |
Ready to buy?
Ultra-Thin CNC Aluminum Alloy GPIO Passive Cooling Case with Fan for Raspberry Pi 5 2GB/4GB/8GB/16GB is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- Dual RTX 3090 LLM Training: 2026 Benchmarks & Build Guide
- DualSense vs GameSir G7 SE for PC Gaming in 2026: Which Controller Wins?
- Best NVMe SSD for Local AI Model Storage in 2026
- AMD Ryzen AI Halo Review Roundup: AMD Builds Its Own DGX Spark Rival
- Best Budget Gaming SSDs Under $100 in 2026
- Asus ROG Xreal R1: 240Hz AR Glasses Hit Review
- Sega Genesis Mini vs SNES Classic Edition: Which Mini Console Wins in 2026?
- Mistral Robostral Navigate: An 8B Model Steers Robots From One Camera
- TCL 27R944K Review: 165Hz Mini LED Gaming Monitor
- Windows XP Gaming Laptops in 2026: A Realistic Buying Guide
- Retro PC storage in 2026: CompactFlash-to-IDE vs a SATA SSD for Win98/XP
- The Adder at the Heart of Intel's 8087 Math Coprocessor
- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- RTX 5090 and Ryzen 7 9800X3D Benchmark Showdown: 2026 Performance Deep Dive
- ASUS TUF 27" 1440p vs Samsung Odyssey G5 32": Best High-Refresh Esports Monitor
- AI Rigging 3D Models: The 2026 Hardware Guide
- Crucial BX500 vs Samsung 870 EVO: Best 1TB SATA SSD for Game Storage
- Best Wireless Keyboard for Home Office and Light Gaming (2026)
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5070
- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
- Best Budget GPU for Stable Diffusion: Why the RTX 3060 12GB Still Wins
- Raspberry Pi 5 IOMMU Support Is Landing in the Mainline Linux Kernel
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090