ELFJMZP Molex 4-pin to 2510 4P-2PIN Fan Adapter Cable 1 to 4 12V Chassis Fan Power Supply
Bottom line: The Molex 4-pin to 2510 4P-2PIN Fan Adapter Cable 1 to 4 12V Chassis Fan is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by ELFJMZP's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored (2-Pack) Molex 4-pin to 2510 4P-2PIN Fan Adapter Cable 1 to 4 12V… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. ELFJMZP's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Dual Fan Power Extension – Converts a single large 4-pin (Molex) connector into 2PCS 2510 4P-2Pin connectors, enabling 2PCS 12V fans to share the same power supply.
- 24AWG high-current wire – Uses 24AWG tin-plated copper wire, which has strong conductivity and reduces voltage drop, making it suitable for stable power supply to high-speed fans.
- Wide compatibility – suitable for devices requiring additional power supply, such as case fans and CPU cooling fans, eliminating the need to rely on motherboard connectors by connecting directly to the PSU.
- All power cables use red wires for positive and black wires for negative, making installation and use more intuitive and preventing incorrect connection of the power supply.
- Compact and lightweight – 13 cm long and weighing only 5 g, it is suitable for installation in compact cases and reduces cable clutter.
Full Specifications
| Brand | ELFJMZP |
|---|---|
| Weight | 5 g |
| Material | Copper, Polyvinyl Chloride (PVC) |
| Wire Diameter | 0.51 millimeters |
| Connector Type | 2510 4p-2pin, Molex 4-pin |
| Full listing title | (2-Pack) Molex 4-pin to 2510 4P-2PIN Fan Adapter Cable 1 to 4 12V Chassis Fan Power Supply – 24AWG High-Current Cable (5.0in/13cm, Black and Red Colour Scheme) |
Ready to buy?
(2-Pack) Molex 4-pin to 2510 4P-2PIN Fan Adapter Cable 1 to 4 12V Chassis Fan Power Supply – 24AWG High-Current Cable (5.0in/13cm, Black and Red Colour Scheme) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
- Build a 3D-Printed Cyberdeck Music Workstation on a Raspberry Pi 4
- Best SSD for a Steam Deck or ROG Ally Upgrade (2026)
- Troubleshooting WinXP Audigy FX Install Failures in 2026
- Wooden CPU Cooler: How to Build One and What to Expect
- Kimi K3 Costs $10.57 per Agentic Task: Is Local Cheaper?
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- Best Game Controllers for PC and Console (2026)
- Best CPU Cooling for AMD Ryzen Builds in 2026
- Best DualSense Controllers and Adapters for PC in 2026
- Best Upgrades to Revive an Old Gaming PC in 2026: 5 Picks
- AI Rigging 3D Models: The 2026 Hardware Guide
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- ROG Ally X vs Steam Deck OLED: 2026 Buying Guide
- AI Bug-Hunting Surged: Running a Local Security-Scanner LLM on 12GB VRAM
- Best Gaming Headset Under $50 for Console + PC (2026)
- GTX 1050 Ti in 2026: Performance, Use Cases, and Modern Comparisons
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- Raspberry Pi 4 vs Pi Zero W: Which Board for Your First Project?
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Blue Yeti vs HyperX QuadCast 2: Best Budget Streaming Mic Setup in 2026
- AI-Driven Driver Hunt: Installing Vintage Sound Cards on Windows 98 With Claude
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090