MOOKEERF RG316 BNC Male to Male Cable
Bottom line: The MOOKEERF RG316 BNC Male to Male Cable ($18.99 on Amazon as of 2026-11-21 23:22 UTC): Two 5ft cables per pack, BNC male on both ends; main trade-off: fixed 5ft length; no shorter or longer options in this pack.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Two 5ft cables per pack, BNC male on both ends
- ✓ 50 ohm impedance suits oscilloscopes, signal generators and network analyzers
- ✓ Silver-plated copper inner conductor and silver-plated copper shielding braid
- ✓ Flexible FEP jacket is waterproof and resists high temperatures
- ✓ 2.2in heat shrink sleeve at each connector helps stop pull-out
Cons
- ✗ Fixed 5ft length; no shorter or longer options in this pack
- ✗ Male-to-male only; female ports or SMA gear need separate adapters
- ✗ 50 ohm impedance is a mismatch for 75 ohm video or SDI runs
- ✗ Frequency range and attenuation per foot are not listed
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MOOKEERF RG316 BNC Male to Male Cable, so this read rests on the manufacturer's listed specs and the current price in the retro crt & display accessories category (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. On the listing's own facts, the case for it is "Two 5ft cables per pack, BNC male on both ends"; the main trade-off is "Fixed 5ft length; no shorter or longer options in this pack". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 50 ohm BNC Male to BNC Male Coaxial Cable (2PCS)
- RG316 Coaxial Cable -- Flexible and light weight, high temperature resistance and good anti-electromagnetic interference .
- Well Built Construction -- The inner conductor of this bnc coax cable is made of silver-plated copper,outer conductor made of silver-plated copper shielding braid,which could maximum protect the signal.Waterproof and flexible FEP jacket allows the bnc cable exposure in outdoor harsh environments.
- Stronger Connection -- The length of heat shrink tube that connect the rg316 cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- Applications -- This bnc cable 50 ohm is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Bronze |
| Cable Type | RG316 |
| Unit Count | 2.0 Count |
| Item Length | 5 Feet |
| Part Number | RG316 |
| Connector Type | RF Connector |
| Number of Items | 2 |
| Special Feature | radio-controlled |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Indoor Outdoor Usage | Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Other Special Features of the Product | radio-controlled |
| Full listing title | MOOKEERF RG316 BNC Male to Male Cable - 2PCS 5FT BNC Cable 50 Ohm for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator etc. |
Ready to buy?
MOOKEERF RG316 BNC Male to Male Cable - 2PCS 5FT BNC Cable 50 Ohm for Ham Radio, Network Analyzer, Modem, Oscilloscope, Signal Generator, Attenuator etc. is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best 1440p Monitor for an RTX 3060: Matching Panel to GPU
- Best NVMe SSD for Gaming PCs in 2026
- Raspberry Pi AI HAT+ (26 TOPS): What It Actually Runs in 2026
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- OpenAI Codex Price War vs Running a Local Coding Model on an RTX 3060
- Local LLM Hardware in 2025: Picking GPUs, CPUs & RAM
- Building a period-correct Windows 98 gaming rig in 2026
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- AI-Driven Vintage Driver Install on WinXP: Using Vision-LLM to Walk a Voodoo + Audigy Setup
- Putting a Modern SATA SSD in a Win98/XP Retro Build via an IDE Bridge
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Framework RTX 5070 12GB Module: Why It's $1,199, Not $699
- Best Components for a Budget Local-LLM Workstation in 2026
- Plug-and-Play Retro Consoles Compared: Genesis Mini vs SNES vs NES Classic
- 20GB Homelab Memory Left: What to Add Next
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- AMD's Ryzen 7 7700X3D Goes Newegg-Exclusive at $329
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- Best 4K Monitor Under $300 for RTX 3060 12GB Gaming in 2026
- CRT vs LCD for Retro Gaming: Which Wins in 2026?
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory for Local LLMs
- RTX 5090 AI Models: Performance, VRAM, Power
- Best GPU for Llama 3.1 8B (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090