BITFUNX GCMCE FlipperMCE Memory Card Emulator, for Gamecube/Will
Bottom line: Per its Amazon listing, the BITFUNX GCMCE FlipperMCE Memory Card Emulator ($30.39 on Amazon as of 2026-11-21 17:27 UTC): unlimited Storage: ①Supports Micro SD cards from 1GB to 500GB; ②The included 8GB Micro SD card can store over 8000 64Mbits GC memory cards.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Unlimited Storage: ①Supports Micro SD cards from 1GB to 500GB
- ✓ ②The included 8GB Micro SD card can store over 8000 64Mbits GC memory cards
- ✓ Backed by BITFUNX's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BITFUNX GCMCE FlipperMCE Memory Card Emulator, so this read rests on the manufacturer's listed specs and the current price in the retro consoles category (how we evaluate). Compare with similarly-priced alternatives in the retro consoles category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- GC/Wii(RVL-001) Support: ①Create virtual memory cards for GC game saves. ②Supports setting the sizes of GC Wirtual Memory Cards:59 Blocks(4Mbits)/123 Blocks(8Mbits)/251Blocks(16Mbits) /507 Blocks(32Mbits)/1019 Blocks(64Mbits)
- Game ID Support: ①Automatically detect running games and create dedicated virtual memory cards(VMC) for enhanced save experiences. ②Compatible with Swiss homebrew software/ FlippyBoot/cube ode/Nintinnt. ③Game2Folder Mapping: Some games share save data for multiple Game IDs. For these cases, a custom game-to-folder mapping can be created.
- Unlimited Storage: ①Supports Micro SD cards from 1GB to 500GB. ②The included 8GB Micro SD card can store over 8000 64Mbits GC memory cards. ③Card Restore: When enabled, GCMCE will always boot to the last used card. ④Settings File: GCMCE generates a settings file (.flippermce/settings.ini) that allows you to edit some settings through your computer. This is useful when using one SD card with multiple GCMCE devices.
- User-Friendly Display and Controls: ①Features a 128x64 pixel OLED display for real-time system status. ②Splash Screen: The startup animation can be customized, letting you set the splash screen to your liking. ③Easily navigate the settings menu with two front buttons. ④The front-facing USB-C port is used for firmware updates, ensuring the device remains up-to-date
Full Specifications
| Brand | BITFUNX |
|---|---|
| Color | Tran-Black |
| Model Name | GCMCE |
| Read Speed | 69 megabytes_per_second |
| Unit Count | 1 Count |
| Media Speed | 6x megabytes_per_second |
| Connectivity | USB-C |
| Model Number | GCMCE |
| Warranty Type | Limited |
| Mfr Part Number | GCMCE |
| Number of Items | 1 |
| Number of Packs | 1 |
| Flash Memory Type | Micro SDHC |
| Compatible Devices | Gamecube |
| Additional Features | Dust Proof, Lightweight |
| Warranty Description | ONE YEAR |
| Hardware Connectivity | microSDHC |
| Item Dimensions L x W | 0.18"L x 0.12"W |
| Memory Storage Capacity | 8 GB |
| Secure Digital Association Speed Class | Class 10 |
Ready to buy?
BITFUNX GCMCE FlipperMCE Memory Card Emulator, for Gamecube/Will is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- OpenAI Codex Now Drives Windows Autonomously: What It Means for Local AI Rigs
- Best CPU Cooler for Gaming PCs in 2026: Air & AIO Picks
- Best 8GB GPU for Local LLMs in 2026
- RTX 4090 AI Server vs AMD Instinct: 2025 Guide
- Steam Deck: Linux's Trojan Horse for PC Gamers
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- RTX 4000 SFF Ada vs RTX PRO 4000 SFF Blackwell for Local LLMs: 20GB vs 24GB at 70W
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- AI Bug-Hunting Exploded: Run a Local Vuln-Scanner LLM on 12GB VRAM
- Crucial BX500 vs Samsung 870 EVO: Best Budget 1TB SATA SSD for Gaming in 2026
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Best Sim Racing Wheel + Shifter Combo Under $400 in 2026: 5 Setups for iRacing, ACC, and GT3
- 3dfx Voodoo5 5500 PCI Boots in a Modern ASUS Z77 Board
- Best Gaming Monitor for Console + PC in 2026
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Best SSD for a PS4 Pro Upgrade in 2026
- ASRock Arc B580 12GB vs RTX 3060 12GB for 1440p Gaming in 2026
- Raspberry Pi Projects for College Students: 2026 Guide
- How to run Llama 3.1 70B on Apple M4
- Best SATA SSD to Upgrade a PS4 Pro in 2026: Faster Loads on a Budget
- In Brief: Best Buy Cuts $1,000 Off RTX 5070 OLED Gaming Laptop with Core Ultra 9 275HX
- Self-Host Home Assistant on a Raspberry Pi 4 8GB: Setup and Real Limits
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090