Apevia
Apevia Galaxy 1000W 80+ Gold ATX 3.1 Fully Modular Gaming PSU
Bottom line: The Apevia Galaxy 1000W 80+ Gold ATX 3.1 Fully Modular Gaming PSU is a specs-and-price decision rather than a crowd-consensus one in the power supplies category, priced around $79.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by Apevia's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored Apevia Galaxy 1000W 80+ Gold ATX 3.1 Fully Modular Gaming PSU using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. Apevia's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ATX 3.1 & PCIe 5.1 Ready for Next-Gen GPUs: Fully compliant with ATX 3.1 and PCIe 5.1 standards, featuring a 16-pin (12VHPWR) cable delivering up to 600W for NVIDIA GeForce RTX 40 and 50 Series GPUs — including RTX 5090 and high-end dual GPU setups.
- 80+ Gold Certified High Efficiency: Delivers over 90% power efficiency to reduce energy loss, lower heat output, and ensure reliable performance under extreme gaming or workstation loads.
- 100% Japanese Capacitors for Long-Term Reliability: Built with premium Japanese capacitors, Active PFC, Full Bridge architecture, and DC-to-DC conversion for exceptional voltage stability, low ripple, and long-lasting durability even under continuous full load.
- Fully Modular Cables for Professional Builds: Flat black modular cables improve airflow and simplify cable management, creating a clean, organized interior perfect for gaming PCs or professional workstations.
- Heavy Duty Protections: Short-Circuit/ Over-Voltage/ Over-Power/ Under-Voltage safeguards keep your PC safe. Double forward converter design. Supports ATX 12V 2.3 version. Supports dual/quad core CPUs. Supports SLI/Crossfire/Haswell. Large japanese capacitor.
- Silent 135mm FDB Fan & Advanced Protection Suite: Features a quiet 135mm Fluid Dynamic Bearing fan with smart thermal control for efficient cooling. Includes OVP, OPP, SCP, UVP, and OTP protections to ensure safe, stable power delivery.
Full Specifications
| Brand | Apevia |
|---|---|
| Wattage | 1000 watts |
| Model Name | GALAXY1000W |
| Form Factor | ATX |
| Model Number | GALAXY1000W |
| Compatibility | PC |
| Connector Type | ATX |
| Cooling Method | Air |
| Number of Fans | 1 |
| Output Wattage | 1000 watts |
| Item Dimensions | 6.2 x 5.9 x 3.4 inches |
| Mfr Part Number | GALAXY1000W |
| Number of Items | 1 |
| Compatible Devices | Computer |
| Power Supply Design | Full Modular |
| Warranty Description | Visit Our Website For More Information |
| Item dimensions L x W x H | 6.2 x 5.9 x 3.4 inches |
| System Bus Connector Type | ATX |
| Connector Type Used on Cable | ATX |
| Full listing title | Apevia Galaxy 1000W 80+ Gold ATX 3.1 Fully Modular Gaming PSU, PCIe 5.1 600W 12VHPWR, Japanese Caps, Silent 135mm FDB Fan, High-Wattage Power Supply for RTX 5070/5080/5090/40 Series & Dual GPU Builds |
Ready to buy?
Apevia Galaxy 1000W 80+ Gold ATX 3.1 Fully Modular Gaming PSU, PCIe 5.1 600W 12VHPWR, Japanese Caps, Silent 135mm FDB Fan, High-Wattage Power Supply for RTX 5070/5080/5090/40 Series & Dual GPU Builds is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- gpt-oss 20B vs Phi-4 14B on a 12 GB GPU: Which One Actually Fits?
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
- RTX 5080 vs RTX 4080 SUPER — one generation apart
- Asus ROG Harpe II Extreme: A 24K-Gold, 65K-Sensor Gaming Mouse
- The Pentium III 1 GHz Race: When Intel and AMD Broke the Gigahertz Barrier in the Same Week
- 48GB vs 64GB DDR5 for Gaming and AI: Worth It?
- Athlon 64 + Radeon 9800 Pro Windows XP Build (2026 Revival): CompactFlash-to-IDE Boot Guide
- Best Controller for Fighting Games on PC in 2026: HORI HORIPAD vs 8BitDo Pro 2 vs DualSense
- Intel Arc B390 Handhelds vs Steam Deck: The Predator Atlas 8
- Intel Arc for Stable Diffusion: ComfyUI + A1111 setup (2026)
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Best Retro-PC Storage & Drive-Imaging Kit in 2026: 5 Picks
- Gemma-4-Harmonia-31B Heretic: What the Uncensored Merge Adds Over Base Gemma 4
- Ryzen 7 5800X vs Core i7-9700K: Best Budget 1080p Gaming CPU in 2026
- Training an LLM in Swift, Part 1: Matrix Mult Speed
- Logitech G920 vs HORI Racing Wheel: Best Sim Racing Wheel for PS5 & PC
- Ryzen 7 5800X3D vs Core i7-14700K on DDR4 for 1440p Gaming (2026)
- How to run Llama 3.1 8B on Apple M3 Ultra
- Ethernet WiFi Router on a Pi Pico 2W: What's Possible
- Best USB Microphone for Streaming in 2026
- Jan vs LM Studio: The Best No-Terminal Local LLM App for an RTX 3060 (2026)
- Is the KOORUI 27-Inch 4K QD-Mini LED a Good Match for an RTX 3060?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090