GRAUGEAR 5.25” Front Panel USB Hub
Bottom line: The GRAUGEAR 5.25” Front Panel USB Hub ($34.99 on Amazon as of 2026-11-22 17:15 UTC): Gen2x2 20Gbps USB-C front port fed by an internal Type-E Key-A header; main trade-off: needs a free 5.25-inch bay, which many modern cases no longer have.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ Gen2x2 20Gbps USB-C front port fed by an internal Type-E Key-A header
- ✓ UHS-I SD and microSD slots for camera, drone and media cards
- ✓ Two tool-free 2.5-inch SATA bays accept 7mm and 9.5mm SSDs/HDDs
- ✓ Puts USB, a card reader and drive storage in a single 5.25-inch bay
- ✓ Dual USB-A ports alongside USB-C via the USB 3.0 19-pin header
Cons
- ✗ Needs a free 5.25-inch bay, which many modern cases no longer have
- ✗ 20Gbps USB-C needs a motherboard USB 3.2 Gen2x2 Type-E header
- ✗ UHS-I reader won't reach the full speed of UHS-II cards
- ✗ Needs two USB headers plus SATA power, so expect cable clutter
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for GRAUGEAR 5.25” Front Panel USB Hub, so this read rests on the manufacturer's listed specs and the current price in the accessories category (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Gen2x2 20Gbps USB-C front port fed by an internal Type-E Key-A header"; the main trade-off is "Needs a free 5.25-inch bay, which many modern cases no longer have". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- High Speed USB-C Hub: Front panel expansion with fast USB-C and dual USB-A ports for high-speed data transfer
- SD & microSD Card Reader: Built-in UHS-I card slots for cameras, drones, and media storage
- Fits Standard 5.25" Bay: Compatible with most desktop PC cases and Windows systems
- Dual 2.5" SSD/HDD Slots: Tool-free mounting for two 7mm/9.5mm SATA drives
- Internal High-Speed Headers: Connects via USB 3.2 Gen2x2 A-Key, USB 3.0 19-pin, and SATA power
Full Specifications
| Brand | GRAUGEAR |
|---|---|
| Color | Black |
| Connectivity | USB-C |
| Model Number | 18150 |
| Compatibility | PC |
| Mfr Part Number | 18150 |
| Number of Items | 1 |
| Number of Ports | 6 |
| Total USB Ports | 4 |
| Total Usb Ports | 4 |
| Compatible Devices | Desktop |
| Hardware Interface | MicroSD, SATA 6.0 Gb/s, SDHC, Thunderbolt 3, USB 3.1 Type A, USB 3.2 Gen 2×2, USB Type C |
| High Speed USB-C Hub | Front panel expansion with fast USB-C and dual USB-A ports for high-speed data transfer |
| Warranty Description | 12 months |
| Dual 2.5" SSD/HDD Slots | Tool-free mounting for two 7mm/9.5mm SATA drives |
| Fits Standard 5.25" Bay | Compatible with most desktop PC cases and Windows systems |
| SD & microSD Card Reader | Built-in UHS-I card slots for cameras, drones, and media storage |
| Item Dimensions L x W x H | 6.88"L x 5.82"W x 1.61"H |
| Internal High-Speed Headers | Connects via USB 3.2 Gen2x2 A-Key, USB 3.0 19-pin, and SATA power |
| Full listing title | GRAUGEAR 5.25” Front Panel USB Hub, Internal SD/microSD Card Reader for Desktop PC, Gen2x2 20Gbps USB-C Port, Dual 2.5" SSD/HDD Slots, USB3.2 Type-E Key-A & USB3.0 19-Pin Header |
Ready to buy?
GRAUGEAR 5.25” Front Panel USB Hub, Internal SD/microSD Card Reader for Desktop PC, Gen2x2 20Gbps USB-C Port, Dual 2.5" SSD/HDD Slots, USB3.2 Type-E Key-A & USB3.0 19-Pin Header is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for Qwen 3 32B (2026)
- Thinking Machines Drops Inkling, a 975B Open Model Leading US Labs
- 18 LLMs Benchmarked on OCR: Why Cheaper Models Often Win
- Best GPU for Qwen3 8B in 2026
- Upgrading From an RTX 3080 in 2026: What to Buy
- Best Budget SSD for PS5 and Steam Download Cache in 2026
- Cisco's Open Security LLMs: Local Vulnerability Scanning on an RTX 3060
- Best DualSense and PC-Compatible Controller (2026)
- Best Gaming Controllers for PC in 2026: 5 Top Picks
- Nemotron 3 Ultra vs Step 3.7 Flash: The 2026 Open-Weights Race
- Best Wheel and Controller for Truck and Farm Sims in 2026
- StarCraft Brood War in 2026: Joining Battle.net Classic, the Fish Server, and ASL Pro Circuit
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- Benchmarking Open Models on Custom Tooling: Is It Agentic Enough?
- Handheld Gaming PC Sale: Best 2026 Deals to Buy Now
- Logitech G29 vs HORI Force Feedback: Best Beginner Sim-Racing Wheel in 2026
- Best PC Game Controller in 2026
- DeepCool AK620 vs Noctua NH-U12S for the Ryzen 7 5800X
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Voodoo5 5500 PCI in a Modern Board: Install, Glide & Win98 Setup
- Qwen Plays DCSS: What Roguelike Runs Tell Us About Long-Context Agent Performance
- Best CompactFlash + IDE Adapters for Retro PC Builds in 2026
- NVK Open-Source Vulkan Driver Gains Experimental DLSS on Linux
- IPEX-LLM + Ollama in Docker: Running Local Models on Intel GPUs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090