ZMHH
ZMHH Desktop Mic Stand
Bottom line: The ZMHH Desktop Mic Stand is a specs-and-price decision rather than a crowd-consensus one in the streaming gear category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by ZMHH's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored ZMHH Desktop Mic Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. ZMHH's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Solid Mic Stand Base: Circular base is metal material made,diameter is 5.12 inch /13 cm and weight is 0.58 kg /1.2 lbs,heavy-duty solid likes stone,high load-bearing capacity,not easy to overturn,with 3 anti-slip pads on the bottom to void desk scratches and reduce anti-slip during moving,one screw hole for installing telescopic rod.
- Adjustable Height:Telescopic rod is carbon steel material,sturdy and durable,twisting the joint knob to loosen or tighten rod, it can raise or lower the position of rod once knob loosen,adjusting the height range 7.48 to 11.8 inch,once tightened, the desktop microphone stand will be locked firmly in place and won't fall down.
- Screw Adapter : Aluminum alloy 3/8“-16 female to male 5/8"-27 screw adapter,easy to install and remove on the microphone stand,suitable for these microphones: Shure MV7+/MV7X XLR,PM1 XLR,AM8 /K688 /XLR&USB/PodCast,Blue Yeti /Blue,HyperX Solocast-USB,Razer Seiren V2,V3,Mini,streaming,AK-10 USB/XLR.
- Universal Mic Clip : Built with the latest reinforced ABS material universal mic clip,sturdy and durable,180° freedom adjustment,inter diameter is 1.06 inch,compatible with most of handheld microphones:Shure SM48 /SM57 /SM58 /SM58S SM86 //SM137 / PGA48 /PGA58 /Beta 58A /Beta 87A /MV6,Xm8500,SAMSON Q2U,Pyle,Tonor.
- Easy to Install:Put the telescopic rod into the circular metal base,then tighten the microphone stand rod to connect to the base firmly, operation is very simple and easy for users,remove is the same,protable microphone stand design is perfect to studio recording, game players,podcasters,broadcast streaming.
Full Specifications
| Brand | ZMHH |
|---|---|
| Color | Black |
| Style | Modern |
| Weight | 0.58 kg |
| Material | Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Aluminum, Carbon, Metal |
| Model Name | ZM0012 |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | ZM0012 |
| Material Type | Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Aluminum, Carbon, Metal |
| Product Style | Modern |
| Item Type Name | Desktop Microphone Stand |
| Maximum Height | 11.8 inches |
| Body Material Type | Metal, Carbon, Alloy Steel, Aluminum, Acrylonitrile Butadiene Styrene (ABS) |
| Included Components | Mic Clip, 3/8" to 5/8" Adapter |
| Warranty Description | One year. |
| Manufacturer Part Number | ZM12 |
| Microphone Stand Thread Size | 3/8 inch, 5/8 Inch |
| Maximum Weight Recommendation | 1.2 pounds |
| Full listing title | Desktop Mic Stand,Adjustable Height Podcast Microphone Stand with Mic Clip 3/8" to 5/8" Adapter,for Shure MV7 |MV7+ |MV7X XLR,Fifine AM8 |K688 |XR&USB,PM1 XLR,Razer Seiren V2|V3 |
Ready to buy?
Desktop Mic Stand,Adjustable Height Podcast Microphone Stand with Mic Clip 3/8" to 5/8" Adapter,for Shure MV7 |MV7+ |MV7X XLR,Fifine AM8 |K688 |XR&USB,PM1 XLR,Razer Seiren V2|V3 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Samsung Winds Down Chip Production Six Days Before Strike: What Memory Buyers Should Do Right Now
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- GPU VRAM Guide: Running a 5GB TTS Model Locally
- Best Racing Wheel for Forza Horizon 6 on PC (2026)
- Intel Arc A770 for Local LLMs: 2026 Benchmark Guide
- Super Mario 64 Nintendo DS Port Lands With Multiplayer Support
- Best Peripherals for a Modern Retro-PC LAN Party (2026)
- FIDECO vs Unitek vs Vantec: Best IDE/SATA-to-USB Adapter for Retro PCs
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- RTX 3060 12GB Showdown: ZOTAC Twin Edge vs MSI Ventus 2X (2026)
- Leanstral 1.5 on an RTX 3060 12GB: Local Math + Bug-Finding Benchmarks
- KOORUI 4K QD-Mini LED vs Samsung Odyssey 4K: Best Budget 4K Gaming Monitor in 2026?
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- Best Budget Streaming Gear for Twitch in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- NVIDIA RTX PRO 6000 Blackwell vs RTX A6000: Is 96 GB Worth $4,000 More?
- Best Parts for a Budget Ryzen + RTX 3060 Gaming PC Build in 2026
- Why Direct3D Killed Glide: How the 3dfx Voodoo Empire Lost the API Wars
- Open-WebUI on a Raspberry Pi 4: A Front-End for Your RTX 3060 LLM Rig
- Best Budget SATA SSD for Gaming and Boot Drives in 2026
- No GPU Required? Testing Local LLM Inference on the Ryzen 5 5600G iGPU
- Qwen 3.6 35B on RTX 3060 12GB: 18–28 tok/s
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090