EZDIY-FAB MH01 Internal USB 2.0 9-Pin Hub
Bottom line: The EZDIY-FAB MH01 Internal USB 2.0 9-Pin Hub is a specs-and-price decision rather than a crowd-consensus one in the rgb & lighting category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for EZDIY-FAB MH01 Internal USB 2.0 9-Pin Hub, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【 Massive 4-Port Expansion 】 Converts one USB 2.0 header into four ports, eliminating header bottlenecks for AIOs, RGB/fan hubs, front I/O, Bluetooth modules, and more.
- 【 Innovative 2-in-1 Hybrid Type-C Connection Combines the 9-pin motherboard signal and SATA power into one Type-C cable, reducing clutter while delivering stable power to LCD AIOs and RGB devices.
- 【Premium Aesthetic with RGB Accents】Ultra-compact hub with a stealth-black finish, hex-inspired shape, and subtle non-addressable RGB side lighting for a clean, high-tech look.
- 【 Tool-Free Magnetic Installation Built-in magnets allow quick, tool-free mounting to any steel surface for flexible placement and clean cable routing.
- 【 Ultra-Compact, Low-Profile Design Slim 3.8 × 2.3 × 0.6 in design fits easily behind motherboard trays and inside tight cable-management spaces.
- 【 Universal Build Compatibility 】 Plug-and-play compatibility with all major motherboard brands and a wide range of popular internal PC components.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | White |
| Connectivity | Bluetooth, USB |
| Model Number | EZDPI263-1 |
| Compatibility | PC |
| Item Dimensions | 3.8 x 2.3 x 0.6 inches |
| Number of Ports | 4 |
| Item dimensions L x W x H | 3.8 x 2.3 x 0.6 inches |
| Full listing title | EZDIY-FAB MH01 Internal USB 2.0 9-Pin Hub, 4-Port Header Expansion, White | 4-Port USB Expansion, 2-in-1 Type-C Cable, Power & Data Combined, Magnetic Mount, Built-In RGB Light, AIO/RGB Hub Support |
Ready to buy?
EZDIY-FAB MH01 Internal USB 2.0 9-Pin Hub, 4-Port Header Expansion, White | 4-Port USB Expansion, 2-in-1 Type-C Cable, Power & Data Combined, Magnetic Mount, Built-In RGB Light, AIO/RGB Hub Support is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Self-Hosted Home Assistant on a Raspberry Pi 4 8GB (2026 Build)
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- Build a Frigate AI Security-Camera NVR on a Raspberry Pi 4 8GB in 2026
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- Tencent Hy3 on an RTX 3060 12GB: Can a $300 GPU Run It?
- Rescue Your Retro PC's Data Before the IDE or SATA Drive Dies
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Audigy 2 ZS Won't Detect in Win98 SE: A Troubleshooting Decision Tree
- Mac Studio M3 Ultra vs RTX 5090 for AI Inference in 2026
- Kimi K3 Scores 57 on Intelligence Index at $0.94/Task
- Real Productivity on 32-64GB RAM for Local LLMs
- Claude Sonnet 5 Closes the Opus Gap: When Local Still Wins
- 4K Gaming PC Build 2026: Cost, Parts, FPS
- Ryzen 5 5600G vs Ryzen 7 5700X for a 2026 Home Lab
- RTX 3060 12GB vs Ryzen 7 5800X for Qwen3 14B Local Inference (2026)
- Best Streaming Starter Kit for New Twitch Streamers in 2026
- Best GPU for AI image generation in 2026 — Flux, SDXL, SD 3.5
- Samsung 27" 1440p 240Hz Gaming Monitor Drops to $169 in 2026 Deal
- GPU Deals for Local LLMs 2026: 12GB vs 16GB Cards
- Jellyfin on a Ryzen 5 5600G: 4K Transcoding on a $400 Mini-Server (2026)
- Intel Arc B50 for Stable Diffusion vs RTX 3060 12GB: Which Wins in 2026
- Best Gear for Online D&D and Virtual Tabletop Nights in 2026
- The $5M Sega Bet That Saved Nvidia — and Still Shapes GPU Launches
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090