AA AUDIO ACCESSORY
AA AUDIO ACCESSORY White Mic Boom Arm (Design for Heavy Mic) Extra-Long 950mm
Bottom line: The AA AUDIO ACCESSORY White Mic Boom Arm Extra-Long 950mm: 6.6lb (3kg) load rating handles an SM7B, SM7dB or Blue Yeti without sagging; main trade-off: 15-degree gear steps mean no infinitely fine angle adjustment.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6.6lb (3kg) load rating handles an SM7B, SM7dB or Blue Yeti without sagging
- ✓ Gear-lock joints instead of springs, so tension does not weaken over time
- ✓ 950mm (37.4 in) reach clears deep desks and full 360-degree rotation
- ✓ Aluminum alloy and glass-fiber nylon build, not hollow stamped steel
- ✓ Built-in cable channels plus six snap-in clips hide the XLR run
Cons
- ✗ 15-degree gear steps mean no infinitely fine angle adjustment
- ✗ May settle slightly after mounting until the gear knob is fully tightened
- ✗ At 84.99 USD it costs more than spring arms in the same class
- ✗ Heavier mics demand a sturdy desk edge for the clamp to bite into
SpecPicks Verdict
SpecPicks scored AA AUDIO ACCESSORY White Mic Boom Arm Extra-Long 950mm using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. AA AUDIO ACCESSORY's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- [6.6lbs Max Load Capacity] The shure mic arm desk mount supports microphones up to 6.6lbs (3kg). It’s ideal for heavier models like the Shure SM7B, SM7dB, MV7+, MV7X, Blue Yeti, AT2020, AT2035, FIFINE, Rode PodMic, and other studio mics that typical mic arms can’t hold.
- [Why It Supports Up to 6.6 lbs] Unlike spring-loaded arms that weanken and sag over time, this boom arm uses a gear-lock system to hold your mic firmly in place. The large gear knob allows easy adjustments and long-term stability without losing tension.
- [Ultra-Sturdy & Durable Construction] Made of heavy-duty aluminum alloy and glass-fiber nylon composite, this mic boom arm delivers outstanding stability and durability.
- [950mm/37.4” Extra-Long Reach] Quietly Rotates Full 360-Degrees & Provides up to 37.4” (950mm) of Mic Arm Extension.
- [Built-In Cable Management] Keep your setup clean with built-in cable channels and six snap-in clips.
- [Worry-Free Support] Our professional & friendly support team is here to help with any issues. This gear-lock arm adjusts in 15° steps with rigid locking system, it has no rebound and may settle slightly after mounting, then stays firmly in place. Always fully tighten the gear knob for best stability.
Full Specifications
| Brand | AA AUDIO ACCESSORY |
|---|---|
| Color | White |
| Style | Suspension Mic Boom Arm |
| Weight | 3kg |
| Material | Aluminum, Metal |
| Base Type | Flat |
| Unit Count | 1 Count |
| Model Number | ABA02CW |
| Material Type | Aluminum, Metal |
| Product Style | Suspension Mic Boom Arm |
| Maximum Height | 95 centimeters |
| Body Material Type | Aluminum, Nylon Composite |
| Included Components | Cable Clips, Cable Management System |
| Warranty Description | 1 year warranty. |
| Manufacturer Part Number | ABA02CW |
| Maximum Weight Recommendation | 6.6 pounds |
| Full listing title | AA AUDIO ACCESSORY White Mic Boom Arm (Design for Heavy Mic) Extra-Long 950mm, 6.6lbs Load Capacity, Gear-Lock Suspension Scissor Microphone Stand Desk Mount for Shure SM7B SM7dB MV7, Blue Yeti, Rode |
Ready to buy?
AA AUDIO ACCESSORY White Mic Boom Arm (Design for Heavy Mic) Extra-Long 950mm, 6.6lbs Load Capacity, Gear-Lock Suspension Scissor Microphone Stand Desk Mount for Shure SM7B SM7dB MV7, Blue Yeti, Rode is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Vision LLMs Driving Win98 Driver Installs: Inside Our 4-PC Retro Fleet
- Best Streaming Setup for Sim Racing in 2026: Cam, Mic, Light
- Best Gaming Monitor for 1440p in 2026
- Qwen Plays DCSS: What Roguelike Runs Tell Us About Long-Context Agent Performance
- Fish Audio S2.1 Pro Is Free Until July 24 — But Can You Run TTS Locally on an RTX 3060?
- Is vLLM Worth It If You're Not Serving Other Users?
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Anthropic Tightens Claude Fable 5 Limits — Why Builders Are Eyeing Local Rigs
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- MiniMax-M3 Scores 55 on AA Index: Can You Self-Host It?
- Best CPU for Streaming and Gaming on AM4 in 2026
- Open-Source NVK Adds DLSS: What RTX 3060 Owners Get
- Throw a Modern Retro LAN Party in 2026: The Hardware Checklist
- ZOTAC RTX 3060 Twin Edge vs MSI RTX 3060 Ventus 3X: Which 12GB Card?
- Hosting a Period-Correct LAN Party in 2026: Quake 3, UT99, and the Gear That Still Works
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming and Light Local LLM Work
- Can a Ryzen AI Max+ 395 Mini-PC With 128GB Run Big LLMs? The r/LocalLLaMA Question
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best PlayStation Controllers for PC Gaming in 2026
- Best CPU Cooler for Ryzen 7 9800X3D in 2026
- A 3D-Printed Switch Steering Wheel V2 Brings Adaptive Racing to More Players
- Does Ryzen 3D V-Cache Speed Up CPU-Only LLM Inference?
- Best Retro Emulator Consoles 2026: AMD GPU Buying Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090