UEEGO Sipeed Tang Nano 9K FPGA Development Board
Bottom line: The UEEGO Sipeed Tang Nano 9K FPGA Development Board is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category, priced around $35.99 on Amazon as of 2026-11-20 21:49 UTC, orderable but not in stock. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ [WiKi] wiki.sipeed.com/hardware/en/tang/Tang-Nano-9K/Nano-9K.html
- ✓ Backed by UEEGO's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for UEEGO Sipeed Tang Nano 9K FPGA Development Board, so this read rests on the manufacturer's listed specs and the current price in the emulation hardware category (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [Powerful FPGA Core] Tang Nano 9K is built on the GOWIN GW1NR-9, featuring 8640 LUT4s, 6480 flip-flops, 468K B-SRAM, and 64M PSRAM. It supports the PicoRV RISC-V soft core, making it ideal for Verilog HDL learning, digital logic design, and complex circuit verification.
- [Rich Display Interfaces] Tang Nano 9K integrates HDMI, RGB LCD, and SPI LCD interfaces to support a variety of display output solutions, making it ideal for video processing, image output, and display-related prototyping.
- [Programming and Debugging] Tang Nano 9K is equipped with BL702 USB-JTAG and USB-UART, eliminating the need for an additional debugger; 6 programmable LEDs, 2 user buttons, 32Mbit SPI flash memory, and a TF card slot for expanded storage.
- [Flexible I/O] Configurable I/O interfaces with a drive current range of 4mA–24mA; equipped with 2 PLLs and 20 multipliers to support high-speed operations; all I/O pins are exposed, facilitating connection to various peripherals and project verification.
- [Application Scenarios] Whether you are an FPGA beginner, a RISC-V developer, or a seasoned hardware engineer, you will benefit from this board. It supports design using the Verilog HDL hardware description language, can run C/C++ code as an MCU, and supports co-design of hardware and software. It is suitable for prototyping, logic verification, embedded system design, and industrial control projects.
- [WiKi] wiki.sipeed.com/hardware/en/tang/Tang-Nano-9K/Nano-9K.html
Full Specifications
| Brand | UEEGO |
|---|---|
| Model Name | Sipeed Tang Nano 9K Development Board |
| Unit Count | 1.0 Count |
| Connectivity | USB |
| Model Number | Sipeed Tang Nano 9K |
| Built-In Media | Tang Nano 9K Kit |
| Mfr Part Number | Tang Nano 9K |
| Processor Count | 1 |
| Total Usb Ports | 1 |
| RAM Memory Installed | 8 MB |
| Warranty Description | six months |
| RAM Memory Technology | PSRAM |
| Connectivity Technology | GPIO, HDMI, USB |
| Memory Storage Capacity | 4 MB |
| Smart Home Compatibility | Not Smart Home Compatible |
| Ram Memory Installed Size | 8 MB |
| Full listing title | Sipeed Tang Nano 9K FPGA Development Board, Open Source RISC-V PicoRV MCU, with GW1NR-9 Chip 8640 LUT4 32Mbits SPI Flash, Single Board Computer Support TF Card RGB SPI LCD HDMI Port |
Ready to buy?
Sipeed Tang Nano 9K FPGA Development Board, Open Source RISC-V PicoRV MCU, with GW1NR-9 Chip 8640 LUT4 32Mbits SPI Flash, Single Board Computer Support TF Card RGB SPI LCD HDMI Port is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Emulation Hardware
The FPGA Programming Handbook: An essential guide to FPGA design for transforming ideas into hardware using…
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best CPU Cooler for Ryzen 7 5800X and 5700X in 2026
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Running a Local LLM on a Raspberry Pi 4 Cluster — Realistic Expectations for 2026
- How to run Qwen 3 14B on NVIDIA GeForce RTX 3090
- Best IDE & SATA-to-USB Adapters for Retro PC Builds in 2026
- Can You Game While Ollama Runs? RTX 3060 12GB VRAM Contention
- Intel Core Ultra 5 250K Plus vs Ryzen 5 7600X3D: The Mid-Range Faceoff
- Simba 3.2 Tops the TTS Leaderboard: Run Local Text-to-Speech on an RTX 3060 12GB
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- Best Gaming Mouse for FPS Esports in 2026 (Tournament-Tested Picks)
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- How to run Qwen 3 14B on Apple M4
- Self-hosting an OpenAI-compatible LLM gateway with LiteLLM
- Best Sim Racing Wheels for Beginners in 2026
- Mistral Medium 3.5 (128B) Local Inference: VRAM, Quants and Tokens/sec
- Boot Windows 98 from CompactFlash: A Silent, Reliable CF-to-IDE Build
- ComfyUI on an RTX 3060 12GB: Stable Diffusion & Flux Throughput in 2026
- NVMe vs SATA for Game Load Times: WD Blue SN550 vs Crucial BX500 in 2026
- Voodoo3 3000 PCI vs AGP — Driver Install Troubleshooting in 2026
- Best SSD for a Local-LLM Rig in 2026: NVMe vs SATA
- Custom Steam Controller Startup: Reviving OG Big Picture Mode
- Inkling: The New US Open-Weights Leader — Can You Run It Locally?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090