Thermalright AT7 Thermal Paste 4.5g
Bottom line: The Thermalright AT7 Thermal Paste 4.5g is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Thermalright's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Thermalright AT7is a smooth thermal paste for PC building, CPU cooler installation, GPU repasting, and routine desktop maintenance.With12.9W/mKthermal conductivity, AT7 is made for jobs where clean contact between the chip surface and cooler base matters, such as a new CPU cooler install, an air cooler or AIO swap, or replacing old paste after cleaning.The texture spreads easily across a CPU heat spreader, GPU die, chipset, or heatsink contact surface. It gives better control when applying a thin layer by hand, especially during repasting or cooler reinstallation.Thenon-conductive formulais…
SpecPicks Verdict
SpecPicks scored Thermalright AT7 Thermal Paste 4.5g using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Thermalright's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 12.9W/mK thermal conductivity for CPU cooler installs, cooler swaps, and repasting work after old paste has dried out or been cleaned off
- Smooth easy-to-spread texture works well on CPU heat spreaders, GPU dies, chipsets, and heatsink contact surfaces
- Non-conductive formula is easier to handle around CPU and GPU components during careful installation, repair, or routine maintenance
- Made for new PC builds, CPU cooler replacement, GPU repasting, heatsink reinstallation, and desktop maintenance after cleaning off old paste
- Included spatula gives better control when spreading a thin layer by hand, especially on flat contact surfaces or smaller chip areas
Full Specifications
| Brand | Thermalright |
|---|---|
| Weight | 4.5g |
| Compatibility | PC |
| Package Dimensions | 7.17 x 2.56 x 0.63 inches |
| Full listing title | Thermalright AT7 Thermal Paste 4.5g, 12.9W/mK CPU Thermal Compound, Smooth Easy-to-Spread, Non-Conductive, for CPU Cooler Installation, GPU Repasting, Heatsinks, with Spatula |
Ready to buy?
Thermalright AT7 Thermal Paste 4.5g, 12.9W/mK CPU Thermal Compound, Smooth Easy-to-Spread, Non-Conductive, for CPU Cooler Installation, GPU Repasting, Heatsinks, with Spatula is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Raspberry Pi Retro Handheld with the 8BitDo SN30 Pro
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- Best PC Gaming Controllers in 2026: 5 Picks for Every Budget
- Ryzen 7 5800X vs Ryzen 7 5700X: Which 8-Core AM4 Chip to Buy in 2026
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Cloudflare Swaps Its Blanket AI Bot Block for Granular Crawler Controls
- Best CPU for the RTX 3060 12GB (No Bottleneck) in 2026
- Samsung Odyssey 4K vs KOORUI QD-Mini LED: Best 4K Gaming Monitor?
- Ideogram 4.0 Open Weights on an RTX 3060 12GB: Local Text-to-Image in 2026
- Strix Halo LLM Benchmarks 2026: What AMD's Ryzen AI Max+ Delivers
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- Best Mini-ITX Case for a Small Form Factor Gaming PC in 2026
- Raspberry Pi LLM Cluster: What It Can (and Can't) Do
- Sound Blaster Audigy FX Install Guide for Win98 SE Period-Correct Builds
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- AMD Ryzen AI Max+ 395 vs Mac Studio M4 Max for Local LLM Inference
- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming and Light Local LLM Work
- What Non-Gaming Tasks People Actually Run on Steam Deck
- Four Frontier Models in Eight Days: What a 12GB GPU Can Actually Run
- Best Gaming Mouse for FPS Esports Under $80 (2026)
- Sound BlasterX G6 on a Windows 98/XP Retro Gaming PC: What It Actually Does
- Is the RTX 3060 12GB Still the Best Budget GPU for 1080p Esports in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090