StarTech.com
StarTech.com Expansion Slot Rear Exhaust Cooling Fan with LP4 Connector (FANCASE), Black, 1 Count (Pack of 1)
Bottom line: The StarTech.com Expansion Slot Rear Exhaust Cooling Fan: Fits any PCI, ISA or AGP slot bracket in full-height cases; main trade-off: no PWM speed control; always runs at full 2,200 RPM.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fits any PCI, ISA or AGP slot bracket in full-height cases
- ✓ Inline LP4 Molex power, so no motherboard fan header is needed
- ✓ Reversible bracket: pull air from above or below, exhaust out the rear
- ✓ Ball bearing fan with a rated 37,739-hour MTBF
Cons
- ✗ No PWM speed control; always runs at full 2,200 RPM
- ✗ 6.9 CFM rating suits spot cooling, not whole-case airflow
- ✗ Full-height bracket only; won't fit low-profile or SFF cases
- ✗ Takes up an expansion slot you might need for another card
Manufacturer description
The StarTech.com FANCASE is an expansion slot rear exhaust cooling fan that mounts in a PCI, ISA or AGP slot bracket. It moves heat away from the cards around it and pushes it out the back of the case. StarTech.com pitches it for older 3D cards that run hot, such as the 3dfx Voodoo, TNT2 and GeForce 256. That makes it a practical add-on for a retro PC build where the graphics card sits in still air. The bracket is reversible. You can set the fan to pull air from above or below the slot and exhaust it through the rear. Power comes from an inline LP4 (Molex) connection to your power supply, so…
SpecPicks Verdict
SpecPicks scored StarTech.com Expansion Slot Rear Exhaust Cooling Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the retro motherboards category. StarTech.com's retro motherboards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the StarTech.com FANCASE fit in my computer case?
It fits standard full-height (full-profile) cases and mounts in any PCI, ISA or AGP expansion slot opening. It will not fit low-profile or small form factor cases that use half-height brackets.
How is the fan powered, and can I control its speed?
It connects to your power supply through inline LP4 (Molex) connectors and draws 12V at 0.15A (1.8W). It does not support PWM, so it always runs at its full 2,200 RPM.
Will it help cool an old Voodoo, TNT2 or GeForce 256 card?
Yes. StarTech.com markets the FANCASE as a cooler for older, hot-running 3D cards like the Voodoo, TNT2 and GeForce 256. Put it in the slot next to the graphics card so it can pull warm air away and exhaust it out the rear.
How loud is the StarTech.com expansion slot fan?
StarTech.com rates it at 32 dBA at 2,200 RPM. Because there is no speed control, that is its constant noise level whenever the PC is on.
Which direction does the air flow?
The bracket is reversible. You can set the fan to pull air in from above the slot or from below it, and in both cases it vents out through the rear of the case.
Key Features
- Fits in standard full-height/full-profile computer cases
- Can be used to pull in air from the top to vent out the rear, or pull in air from the bottom to vent out the rear
- Ball bearing fan; Inline LP4 power connectors; 12V @ 0.15A, 1.8W; 6.9 CGM @ 2,200 RPM; 32 dBA; MTBF: 37,739 hours; Black plastic housing; Reversible bracket
- NOTE: Does not support PWM for fan speed control and will operate at full speed
Full Specifications
| NOTE | Does not support PWM for fan speed control and will operate at full speed |
|---|---|
| Brand | StarTech.com |
| Model | FANCASE |
| Voltage | 12 Volts |
| Wattage | 1.8 watts |
| Material | Plastic |
| Unit Count | 1 Count |
| Noise Level | 1 Decibels |
| Part Number | FAN-CASE |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 1 |
| Air Flow Capacity | 6.9 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Included Components | 1 Expansion Slot Exhaust Fan |
| Power Connector Type | 4-Pin |
| Warranty Description | 1 year warranty |
| Maximum Rotational Speed | 2200 RPM |
| Item Dimensions L x W x H | 6.61"L x 1.08"W x 7.87"H |
| Global Trade Identification Number | 00065030782739, 05051749372618 |
Ready to buy?
StarTech.com Expansion Slot Rear Exhaust Cooling Fan with LP4 Connector (FANCASE), Black, 1 Count (Pack of 1) is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Motherboards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- How to run Llama 3.1 8B on Apple M4 Max
- Moonshot Pauses Kimi K3 Signups After GPU Demand Maxes Out
- Mistral Seeks €3B: What a Bigger European Lab Means for Local Rigs
- Ryzen 7 5800X3D vs 5800X: Does 3D V-Cache Beat Raw Clocks for Gaming?
- Pushing a 6GB VRAM Laptop to Its Limits With Qwen3.6-35B-A3B
- Ryzen 5 2600 vs Ryzen 5 5600X for CPU-Only gpt-oss 20B (2026)
- Xbox Mode's PC Performance Boost Favors Nvidia GPUs
- Sound Blaster Audigy 2 ZS vs Audigy FX for Windows XP Gaming (2026)
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Best Parts for a Local Speech and Vision AI Box in 2026
- CRT vs Monitor for Retro Gaming: Which Wins in 2026
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Best Dock and Storage Combo for Handheld PC Gaming: JSAUX Dock + a Fast SSD
- A 180Hz 1440p Gaming Monitor at Entry-Level Pricing — How It Stacks Against Our 4K Picks
- Windows XP on Steam Deck: Retro Setup Guide
- Ryzen AI Max LLM Test: What the Public Data Shows
- Noctua NH-U12S vs ML240L RGB on a Ryzen 7 5800X
- Best Steam Deck Accessories in 2026: Docks, Audio, Controllers, and Storage
- Best Buy Cuts $900 Off an Asus 64GB Gaming Laptop — Is a Desktop Smarter?
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- Dual Radeon AI PRO R9700 Workstation: 64 GB Local LLM Build
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Anthropic: AI Builds Working Exploits in Hours, Not Weeks
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090