Skip to main content
D-Link PCI Gigabit Fast Ethernet Network Adapter Card 10/100/1000 Desktop PC (DGE-530T)
D-Link

D-Link PCI Gigabit Fast Ethernet Network Adapter Card 10/100/1000 Desktop PC (DGE-530T)

Bottom line: The D-Link PCI Gigabit Fast Ethernet Network Adapter Card 10/100/1000 ($24.99 on Amazon as of 2026-11-20 11:20 UTC): Adds Gigabit Ethernet to any desktop with a free PCI slot; main trade-off: conventional PCI only; won't fit PCIe-only motherboards.

$24.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Adds Gigabit Ethernet to any desktop with a free PCI slot
  • ✓ Auto-negotiates 10, 100 or 1000 Mbps to match old and new gear
  • ✓ Jumbo frame support up to 7 KB for large file transfers
  • ✓ 802.1Q VLAN tagging for managed-switch setups
  • ✓ ACPI 2.0 Wake-on-LAN for remote power-on

Cons

  • ✗ Conventional PCI only; won't fit PCIe-only motherboards
  • ✗ Shared PCI bus can limit sustained gigabit throughput
  • ✗ Jumbo frames top out at 7 KB, below the common 9 KB setting
  • ✗ Single port; no link aggregation or failover

Manufacturer description

The D-Link DGE-530T is a PCI Gigabit Ethernet network adapter that adds 10/100/1000 Mbps wired networking to any desktop PC with a free PCI expansion slot. If your retro build or older workstation is limited to an onboard 10/100 port, or its integrated NIC has failed, this card gets you to Gigabit speeds without replacing the motherboard. The port auto-negotiates to 10 Mbps, 100 Mbps or 1000 Mbps, so it works with legacy hubs as well as modern Gigabit switches. It installs as a plug-and-play card. For network tuning, the DGE-530T supports jumbo frames of up to 7 KB, which reduces per-packet…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for D-Link PCI Gigabit Fast Ethernet Network Adapter Card 10/100/1000…, so this read rests on the manufacturer's listed specs and the current price in the retro networking cards category (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Adds Gigabit Ethernet to any desktop with a free PCI slot"; the main trade-off is "Conventional PCI only; won't fit PCIe-only motherboards". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will the D-Link DGE-530T fit in a PCIe slot?

No. The DGE-530T is a conventional PCI card and needs a PCI expansion slot. It will not physically fit an x1 or x16 PCIe slot, so check your motherboard's slot layout first.

Does this card work with my older 10/100 router or switch?

Yes. The port auto-negotiates to 10 Mbps, 100 Mbps or 1000 Mbps, so it links at the fastest speed your router, hub or switch supports.

What size jumbo frames does the DGE-530T support?

It supports jumbo frames up to 7 KB. Set the same or a smaller MTU on your switch and other devices, because all hops must support the frame size you choose.

Can I wake my PC remotely with this network card?

Yes. The card supports ACPI 2.0 Wake-on-LAN power management. Your motherboard BIOS and operating system also need WOL enabled for remote wake to work.

Are drivers available for Windows and Linux?

The product listing describes plug-and-play installation but doesn't list supported operating systems. Check D-Link's support page for the DGE-530T for current drivers before you buy.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Add high-speed Gigabit Ethernet connectivity to any system with a PCI expansion slot
  • Auto-negotiates port speed to 10 Mbps, 100 Mbps, or 1000 Mbps
  • Plug and play installation
  • Supports Jumbo Frames of up to 7 KB
  • ACPI 2.0 WOL Power Management
  • Supports 802.1Q VLAN taggingg to Items - Edit Products.

Full Specifications

BrandD-Link
Unit Count1 Count
CompatibilityPC
Compatible DevicesDesktop
Data Link ProtocolGigabit Ethernet, IEEE 802
Data Transfer Rate2000 megabits_per_second
Hardware InterfaceEthernet, PCI
Global Trade Identification Number00790069251610

Ready to buy?

D-Link PCI Gigabit Fast Ethernet Network Adapter Card 10/100/1000 Desktop PC (DGE-530T) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $24.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Retro Networking Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →